I've just got another sata HDD and thought lets put in a nice install of Fedora 14 having tried out the live CD over the weekend. Right my system is configured thus
[Code]...
will Fedora 14's install program make an addition to the existing GRUB configuration or will it do something different Yes I have searched.... and looked at the installation documents....
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies View RelatedI have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
I have an old version of DSL installed, followed by XP. On a further partition I installed Debian 6. Installation of Debian went smoothly, including the final detection of the other two OS for Grub. I had expected that the Debian-version of Grub would override/overwrite the one that came when I installed DSL.
It did not - when I boot, Grub comes up with the old DSL menu, in which Debian is not included.
From what I've been reading about Grub, there's two "fases", first in MBR, that points to the second part where the actual boot-commands are given, in my case stored in DSL.
When I open the Grub config-file in Debian, both DSL and XP are correctly listed.
Now I'm not sure what to do - I'm a bit hesitant to try and point grub-fase-1 to Debian (if I can write the correct lines at all, I'm very insecure on that) - if that fails, I cannot boot at all. But I'm not really sure either how to formulate a new rule in the DSL-grub, to make Debian boot from the existing menu.
I have just finished installing Karmic on new computer. I have already installed java jre, flash plugin, and unrar/rar. My question is can I still install restricted extras to get addition applications installed, without corrupting my apps already installed? Or should I just manually install the remaining items from restricted extras manually?
View 2 Replies View RelatedError shown on screen is :
Building the shared folder support module [Failed]
I looked into /var/log/vboxadd-install.log, saw:
Error! Could not find module source directory.
Directory: /usr/src/vboxvfs-3.1.8 does not exist.
I check the path /usr/src/vboxfs-3.1.8 exist there right, so why do I get this kind of error?
What happens if I install the DVD version of Fedora 15 over an existing installation of Fedora 15-KDE? Will it cleanly add any software I don't already have, or will it change or disrupt my installation?
View 5 Replies View RelatedI've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedI currently doing a network emulator program and the features must includes the web-based interface for user configuration. I able to run my program through command line. But I would like to ask how to associate my program to web-based interface for user configuration?
View 8 Replies View RelatedI have been successfully triple-booting Windoze and 2 varieties of Linux on my desktop for some years now with very few problems. The latest configuration which I have been using for 6 months or so is Kubuntu 10.04 & Ubuntu 10.04. The last version installed was Kubuntu 10.04 and on installation it's version of grub found Ubuntu 10.04 no problem (other than a minor problem with partition numbering which was manually fixed) and all was well.
I have just upgraded Ubuntu 10.04 to 10.10 (by clean install rather than version upgrade) and the new grub from Ubuntu 10.10 will not start the existing Kubuntu 10.04, I just get "error: file not found".The grub.cfg file from Ubuntu 10.10 is completely different (copy attached) but the partition references & numbers etc. are correct so why will the existing Kubuntu 10.04 not start ? Windoze starts OK.
#
# DO NOT EDIT THIS FILE
#
[code]....
Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
View 2 Replies View RelatedI would like to get my system installed with all the software I seem to need to use and get everything all running the way I want it to and then make a dvd which will include all the items in my install. I want to be able to help a friend put his computer on Ubuntu with the same items installed I have but he is not able to get on the internet with anything other than a slow dial up connection. He also has to take his computer to his parents house to allow it to go on line so I would like to make a live dvd for him to use to try my setup and also be able to use the dvd to install it on his own computer.
I am not so good at the command line yet so this might be beyond my newbie abilities right now, but I would like to know if it is possible to do this. I assume if he has a computer where drivers are needed by Ubuntu it might be necessary to go on line to make the system work anyway, but it is worth a try I think. Also I would like this dvd so I can install my existing system on my other machines without going through all that downloading again. As another side issue, how does Ubuntu find drivers for the different computers it installs on? Can I also find the drivers my friend might need and put them in a certain directory where Ubuntu could find them during the install?
i have puppy 4.2.1 installed on my hdd and have frugal installed a older version inside the existing puppy and would like to add it to the existing GRUB menu
View 6 Replies View RelatedI had installed Ubuntu on my one and only hd. I partitioned with GParted and installed fedora Release 9 Sulphur. i can not boot Ubuntu. I tired some changes to grub.conf but with no luck, namely, 1. title Ubuntu root (hd0,0) chainloader +1 2. title Ubuntu configfile (hd0,0)/boot/grub/menu.lst. this one gives error 15 file not found. Here is my fdisk-l output:
[code]...
I've installed opensuse 11.2 and want to install some more packages.
If I have the online repos enabled the package eclipse is found in
Index of /distribution/11.2/repo/oss
If I disable the online repos the packages are not found on the dvd.
i have now searched the dvd and eclipse is not available.
What is wrong? Why eclipse is not on dvd?
Is there an extra dvd as I read only non oss stuff is on other
dvd nad language special stuff..
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies View RelatedWhen I installed Ubuntu Desktop 10.10... I ran updates and was asked if I wanted to install or skip updating "Grub". I chose to skip this.
Is there any danger of losing an existing Win2003 install if I go back and install "Grub"?
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I am running fedora 12.
It works very smooth in my system.
My system configuration is given in my signature.
When i am trying to install fedora 13 64 bit after that anaconda screen i am getting a screen of blue background and the rectangular small installation screen .but the problem is that nothing is there in that screen.It is completely white and the system stands there for ever.
How can I install fedora 13?
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
I have downloaded the package but i dont know how to install and start the program.
View 10 Replies View RelatedI'm running Karmic Server with GRUB2 on a Dell XPS 420. Everything was running fine until I changed 2 BIOS settings in an attempt to make my Virtual Box guests run faster. I turned on SpeedStep and Virtualization, rebooted, and I was slapped in the face with a grub error 15. I can't, in my wildest dreams, imagine how these two settings could cause a problem for GRUB, but they have. To make matters worse, I've set my server up to use Luks encrypted LVMs on soft-RAID. From what I can gather, it seems my only hope is to reinstall GRUB. So, I've tried to follow the Live CD instructions outlined in the following article (adding the necessary steps to mount my RAID volumes and LVMs). [URL]
If I try mounting the root lvm as 'dev/vg-root' on /mnt and the boot partition as 'dev/md0' on /mnt/boot, when I try to run the command $sudo grub-install --root-directory=/mnt/ /dev/md0, I get an errors: grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea. grub-setup: error: Embedding is not possible, but this is required when the root device is on a RAID array or LVM volume.
Somewhere in my troubleshooting, I also tried mounting the root lvm as 'dev/mapper/vg-root'. This results in the grub-install error: $sudo grub-install --root-directory=/mnt/ /dev/md0 Invalid device 'dev/md0'
Obviously, neither case fixes the problem. I've been searching and troubleshooting for several hours this evening, and I must have my system operational by Monday morning. That means if I don't have a solution by pretty early tomorrow morning...I'm screwed. A full rebuild will by my only option.
I haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
View 1 Replies View RelatedIs it possible to create a Live CD install of my existing Ubuntu installation? I mean, to create a Live installation CD of my system as it is now on my pc, with all the programs and utilities that I have installed, so that if the system crashes and is unbootable, I could be able to restore it to the state when I created the Live CD.
View 2 Replies View RelatedAfter spending almost 100 hours trying to get my MP3 player working I have decided to add an XP partition and use it there.I am an Ubuntu newbie and am finding the whole "new-dos" experience too frustrating for words.Can someone please explain in ENGLISH for an IDIOT how I can do this.
View 9 Replies View RelatedI have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
View 1 Replies View RelatedSystem: Lenovo R61i, that had Ubunta installed, removed and Vista Home Pre. installed. Plenty of hardware power. Want to install a Knoppix 6.0.1 from an existing CD I have. I want to be able to run both systems on the laptop (dual boot)? I have partitioned the hard drive using vista, so there is now a partition that I believe is Lenovo rescue, the main large C space, and the new partition about 6.4 gb that vista shrank out that is not assigned. When I try to install the Knoppix it just keeps loading in and ends up running live off the CD without installing to the hard drive.
I have stopped the loading sequence in different places, but don't know what to enter or where. I also wanted to install it onto my 64 gb flash drive that has nothing installed but comes up showing that it is fat 32. I have tried to install to the flash drive from the live running Knoppix under install to usb drive, it finds the drive, I select it, and the next window says there is no such file. So, that's my story and I'm stickin to it. All I want to do is get this system onto the laptop or flash so I don't ever have to deal with Microsoft Windows again!
The whole code is written in C, C++, and Fortran. Is it possible to make it to use more than 4GB memory. Now it is always crashed when it reaches 3GB memory. If it is possible, how to set up the compiling options (or configure flags)? We can use gcc, g++, ...or intel compilers our OS: Fedora 12 x32
[code]....
New 320 Gig HD. Installed FC14 from DVD and it worked, except there are no icons at all to get started as there were in FC 13. Cant find "Places", "Applications" that were at the top of the screen. Now it's blank except for the splash design. Tried to re-install, but it won't do that. Just goes to the HD and the same blank splash screen. Thanks for the help. Please be easy with explanations as I'm new at this.
View 14 Replies View Related