Fedora Installation :: Huge Upgrade - Maintain Existing Partitions / Settings?
Aug 30, 2010
I've been running Fedora Core 3 on a P4 450 as a personal Samba server and domain controller. It's worked so well that I never gave any thought to upgrading. The other night, I noticed that Up To Date wasn't working, and that Firefox was acting strangely. I made the FC 13 installation disks, whereupon I found out that the system didn't have enough memory.
Rather than mess with the P3 450 any more, instead I swapped main boards and decided to do an upgrade. it even possible to do an "upgrade" from 3 to 13? Is it possible to maintain my existing partitions/settings. I've backed up everything that I'd be too unhappy to lose. It's a two drive system and the second is nothing but data, none of it catastrophic to lose, but at least disappointing. I'd like to keep the data and settings on the primary disk, but won't cry if I can't.
View 10 Replies
ADVERTISEMENT
May 27, 2011
However, the option to upgrade to 11.04 has recently become available in the Update Manager.
If I choose to follow this upgrade path, will my existing user settings such as nautilus shortcuts, wallpaper and other personalised settings be changed or reverted to default in any way?
Or will the upgrade execute, and leave everything looking and working exactly the same?
View 1 Replies
View Related
Sep 2, 2009
I downloaded the Fedora respin DVD from [URL]. I burned the image and tried to upgrade my existing RussianFedora 10 distro. However, even after the successful completion of upgrade process, I boot into the same old RussianFedora 10. I would, also, like to mention that the upgrade process seemed to be unusually fast, it took only 15 mins for the complete process!
View 2 Replies
View Related
Jun 22, 2010
I've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies
View Related
Sep 9, 2010
On my triple-boot PC:
Code:
SuLinux:~ # fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
Will the above procedure accomplish this objective, without crippling openSUSE ? The second swap partition has never shown any activity (on SUSE). I understand (from Using shared swap files) that a single swap partition may be shared. Since these areas are relatively small, It is not inconvenient to maintain separate swap partitions.
View 9 Replies
View Related
Sep 2, 2010
I installed on LUKS+LVM, and I want to preserve my /home without moving the data to any external media (I don't have any). My partition layout is as follows:
sda1: /boot
sda2: encrypted volume (sda2_crypt)
sda2_crypt: LVM volume group, with /, swap and /home.
Having many previous (sad) experiences with completely borked experiments and data loss, I've decided to try the trick in VirtualBox first. I've installed Debian (testing, netinst, Dec 2009) with encrypted LVM, and touch'd a file in my $HOME so that I'd know if the contents were preserved. Then proceeded to install Ubuntu 10.04.1 from the alternative CD. After the installer started and loaded some of the basic components (but before it entered the partitioner) I've switched to a shell and read a scroll of identification:
Code:
$ cryptsetup luksOpen /dev/sda2 sda2_crypt
[entered the passphrase]
$ lvm vgscan
$ lvm lvscan
* Another concern; after the installation, I've noticed that the contents of my $HOME were overwritten by Ubuntu's default skeleton (pictures, desktop, music, templates, and other crap). The control file I've touch'd after installing Debian wasn't there.
View 1 Replies
View Related
Jan 8, 2011
I have reinstalled XP and conseqently messed up Grub and lost Ubuntu. I am trying to do a fresh install but the installer insists on trying to overwrite the whole disk. I downloaded the alternate instal ISO as this has got over this problem in the past but this also wanted to overwrite the whole disk. It recognises the Sata Raid array as being nfts (this is my main data disk) but it doesn't recognise the existing partitions on my main disk:
18G windows
18G Old Ubuntu
113G nfts data disk
View 8 Replies
View Related
Jul 28, 2010
I've configured my RHEL system to be used as tftp server. I've configured NFS,VSFTPD and DHCP too. Everything works fine, the clients are able to boot from PXE and get the kickstart information from the server and the installation completes successfully. Now the problem is the RHEL installation removes all the existing windows partitions. How do I make my system a dual boot? I've configured my kickstart to use "Remove existing Linux Partitions" and the problem still persists.
View 1 Replies
View Related
Dec 11, 2010
Due to a problem I had with a 10.10 upgrade [URL] and the need to access data on the pc I upgraded, I downloaded the live CD and installed on the same pc. Now I have two versions of 10.10 on the same pc but in different partitions. Is there any way I can copy my settings from the partition that is not working (the upgraded one) to the one that is working?
View 1 Replies
View Related
Feb 6, 2010
I am trying to install ubuntu 9.10 on an system which already has XP installed. I had used Ubuntu earlier but when I installed XP ( in an attempt to dual boot) I seem to have lost the Ubuntu Installation. But the problem is GParted or the Ubuntu installer dont recognize the existing partitions but instead see it as an empty unallocated drive. I have a 120GB hard disk. Below is the extract after fdisk:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4fa8a60b .....
Also this is how the disk Utility in Ubuntu sees my system: ( See attachment)
[IMG]file:///D:/Screenshot.png[/IMG]
View 9 Replies
View Related
Apr 18, 2010
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
View 2 Replies
View Related
Sep 17, 2010
I need to change from CentOS 4.8 to Redhat Enterprise 5.
1) What is my best option to upgrade and maintain the additional software that I have installed in /opt & /usr/local?
2) Process to reinstall/configure the additional drives during & after the install?
View 7 Replies
View Related
May 5, 2010
The title's not especially clear, so I'll post a screenshot of what's happening. The upgrade keeps finding instances of the same kernel; the list in the terminal is constantly scrolling down, finding 'new' instances.
It's been doing this for about half an hour now. BTW, upgrading from 64bit 9.10 to 64bit 10.04.
View 1 Replies
View Related
May 23, 2011
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
View 9 Replies
View Related
Aug 6, 2011
The Payment Card Institute (PCI) is requiring our site to upgrade to the latest versions of Apache, Mysql, OpenSSL, and PHP to fix known bugs that can compromise securityI can build all these from source, but when I do "make install" they don't mimic at all what is installed (directory format, files, etc) when I do apt-get install (of whatever old versions are in the dist).How can I find out how the packages are build via configure/make so that I can replicate the files, directory structure, etc, just with the current versions.
View 9 Replies
View Related
Mar 28, 2010
I want to upgrade from another distro to ubuntu server for a few reasons. The only problem is I have a lot of data that needs to survive. here is how my computer is setup. I've 5 drives on the computer,
A- 10gb drive for OS and swap only, no data
B,C,D,E - 4x 500 GB drives in a LVM. they make up one large drive with xfs and this volume has about 1.2 TB of data. there is nothing fancy on it, no encryption and no software raid of course the little 10gb drive can be formatted no problem, but the LVM needs to be migrated over intact.
View 5 Replies
View Related
Jul 14, 2011
When I was installing Ubuntu onto my laptop, I probably did a mistake partitioning the hard drive by selecting align to: nothing, because I didn't want to have unallocated spaces between partitions. However, this resulted in partitions' misalignment as no one partition in the extended one (including the one that is extended) doesn't start on a physical sector boundary. As I already have much data on the HDD and I don't have another one that big, it is impossible for me to erase existing partitions and then copy the data back. So, is there please a way to get the partitions aligned properly without deleting them?
Here is output from fdisk -lu:
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xd58c6e9d
View 6 Replies
View Related
Apr 18, 2011
Currently, I have a dual boot set up with Ubuntu and PCLinuxOS. I have a separate / and /home partition for both (ext4). When I run the installer, it claims the whole disc is empty. I tried the expert option and loaded every module that seemed to have to do with partitioning, but that made no change. Is there some simple option I am missing that might help it recognize that there are existing partitions? This was the "testing" installer if that makes any difference.
View 3 Replies
View Related
Mar 19, 2011
I've read that it can be advantageous to partition three spaces when installing Ubuntu: / /home /swap.It's been said that reinstalling or upgrading the OS is made easier because you only interact with the / partition and don't touch your home data. Does anybody do this that can explain its advantages and what to expect?Also, what about applications that I installed after a fresh install? For example, Rhythmbox comes standard. But what if I uninstalled Rhythmbox and instead installed Exaile and run that. Would a new install on / wipe out Exaile and reinstall Rhythmbox as the music player?
The primary reason I am looking to do this is because it will be for a laptop and I would like to encrypt the /home and /swap partitions but leave the / partition unencrypted to accommodate use of an SSD's "garbage collection" utilities.
View 7 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
Mar 13, 2011
As every time when a new OpenSuse Version arrives, I tried to install 11.4 (I have 11.2 ans 11.3 on separate partitions, + a Windows 7 that already was there when I bought my computer). Previous versions always recognized existing installations and added them to the Grub list, 11.4 doesen't... it merely recognizes the Windows. This is blocking me from testing it before adopting, as I always do, as I don't know how to add these entries manually; I'm too afraid not to be able to add the entries once installed, and not being able to use my older versions in case I have troubles. What went wrong in this release that developers forgot this important part? How I could manually add my entries for 11.2 and 11.3?
View 6 Replies
View Related
Nov 26, 2010
I want to install Linux Mint, but it cannot detect my existing partitions.I have a 500GB HDD, splitted in three partitions, on c: having a Win7 installed, and on d: and e: a lot of personal data.I tried to install Linux Mint, but the installer says there is no other OS installed and there is no any partition at all. I run the Linux Mint in live mode, Gparted says: "unallocated 465.76GiB". But when I go to Menu -> Computer then I can see each and every partition, I can mount them and browse them properly.I tried Ubuntu 10.04 and 10.10 with the same result as described above.
View 9 Replies
View Related
Jun 15, 2009
I have 2 image files, image 1 which is 16MB, has multiple partitions, where the boot partition has a 2.4 kernel in it, and image 2, which is 32MB, has a single partition with a 2.6 kernel.
I wish to add those extra partitions from image 1, into image 2, either by adding them within the 32MB(which means cutting back on the size of the existing partition), or adding them to the end of the image(which means extending the image beyond 32MB).
The boot partition for both images is ext2, while the rest of the partitions in image 1 is just raw data.
I'm working with these images in Mandriva Linux 2009.
How can I achieve what I want to do? I think it should be with fdisk and/or mkfs but I'm not sure how? I've tried using gparted to regenerate the partitions from a new image file with the following steps:
dd if=/dev/zero of=image.img bs=32M count=1
gparted image.img
Then I created a 30M boot partition. However, I'm not able to create the rest of the partitions as they are smaller than 1MB, which seems to be the min supported. I need precise control of the start/ending sectors of each partition.
View 1 Replies
View Related
May 7, 2010
I upgraded from 9.10 to 10.04 (no fresh install, an upgrade). During the upgrade, the installer asked me for the harddisks and partitions to include. I gave him the following ones:
Harddisk 1
1. Windows XP
2. Windows 2000
Harddisk 2
3. Ubuntu 10.04
After the installation was complete, I could only start Ubuntu. Both Windows versions just showed a flashing cursor at the left upper top screen. No HDD activity! How can I get WinXP and Win2000 selectable within grub2?
View 2 Replies
View Related
Aug 30, 2009
Does anyone know how to install the Default KDE Desktop settings in an existing user? I copied a user's home directory from another Linux and when I added the user using adduser on the new intallation, it did not copy any of the Desktop or other .rc/.profile settings.
Is there a script that is run by adduser, or a list somewhere of the files that are needed for KDE Desktop to work correctly? Or, do I delete or rename certain files and then, what executable do I run to get the Desktop?
View 3 Replies
View Related
Aug 11, 2011
I am having ubuntu8.10 and i work with ns-2.34 with gcc-4.3. if i upgrade to ubuntu9.04 will it disturb my ns-2.34 settings.
View 7 Replies
View Related
Jul 17, 2010
I have been given Toshiba Tecra S11 with windows 7 running on it to install Ubuntu 10.04. Toshiba has a bunch of utilities running on the machine set up as dev/sda1, dev/sda, dev/sda3 and dev/sda4. I do not know where to start because of these existing partitions.
View 2 Replies
View Related
Apr 24, 2011
Its from a Synology Box with 3 disks, which one is damaged. But this disk wasnt in use.Take a look on the raid-size of 493 GB - and the both available disks with 250GB..)
On the others there were a linear raid. during this damaged disk the synology-device tells me, that the volume was crashed.But it look like, that this disk was not mounted into this volume.Quote:
DiskStation> mdadm --detail /dev/md2
/dev/md2:
Version : 00.90
[code]....
View 3 Replies
View Related
May 30, 2010
if this is covered elsewhere. Could not find it (could be being blind) If I upgrade fro 9.10 to 10.04 LTS will I lose
1. My Gnome panel settings
2. My compiz fusion settings
and
3. Will EnvyNG still be able to manage m,y Nvidia drivers OK?
I realize there is always a risk with an upgrade but I was just wondering what you all thought the chances were that I may lose these settings.
View 3 Replies
View Related
Dec 5, 2010
I was running 10.04 on my Asus EEE PC. Today I upgraded from 10.04 to 10.10, but with lots of regrets. The complete desktop changed. I don't even know how to access the system settings anymore. I just wanted to start up the Twonky Media server from my personal folder again, which resides in my personal user folder, but I cannot find the folder at all! Shame on the Ubuntu team to throw around the user experience so much. The Ubuntu Linux distribution has gone back to a nerdy level, I hoped it had recovered from that. Make-the-user-feel-at-home! Is that so difficult?
Where is my Favorite group, where is my System group, where is my personal Home user folder? I'm sure I can find them on my own, but it's a shame that my user experience has been taken into a rolercoaster. Why make it so difficult on the user Ubuntu, why?
View 9 Replies
View Related
