I'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Repliesbasically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies View RelatedI am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
Code:
# livecd-iso-to-disk /home/jorge/downloads/Fedora-11-i686-Live-XFCE/Fedora-11-i686-Live-XFCE.iso /dev/sdb1
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
i am trying to install openSUSE from a usb pen. i have configured the BIOS to boot from Usb pen. i get "Could not find kernel image gfx boot".
View 5 Replies View RelatedI just built this computer with a bunch of old parts, and i put in a blank hard drive. There is no operating system on this computer yet. I put the Ubuntu Usb into the computer and made it boot from the Usb. Everything looked fine and good, until it said "boot:". It wanted me to type something in. So i clicked enter and it said "could not find kernel image: linux".
View 9 Replies View RelatedIve been trying to PXE boot a XEN kernel image in gzip format, and I was getting Invalid or corrupt kernel format error. Ive seen that other kernel images having a file type of Linux kernel x86 boot executable RO-rootFS are bootable. (both are bootable using grub anyhow).
Is there any way to convert the b/n the formats, or any other solution?
I was booting a Virtualbox instance, again I guess that shouldn't matter because pxelinux loads from tftp properly, but it doesn't even proceed to load the kernel. I think the issue here is with the image format itself rather than what it contains, or where it runs.
I have Ubuntu 10.10 installed on my laptop.Its a dual boot with XP, have been using ubuntu/xp for a while now..Till now i always used to remove older kernel images after ubuntu update, then update grub and do "sudo apt-get autoclean" never had any problem at all.i skipped the second step, i removed the old kernel image and did "Autoclean" on apt-get but forgot to update grub.
Now after i have reboot, when grub loads i can see only 2 "Memtest" lines in grub list and 1 "windows xp" line.the "Linux kernel generic" line is missing. I can boot in xp (have done just that to post this) but since there is no line in grub list to boot into Ubuntu, cant boot in Ubuntu.Is there any option, something i can do at "Grub" to boot into Ubuntu?
I wanted to Upgrade from Fedora 13 to 14 and downloaded the Upgrade Image using the Pre_Upgrade Installer. My system downloads the upgrade just fine but when it starts to perform the it asks for the location of the new Fedora 14 ISO and I have no idea where that is or what to enter as a possible location which I have no doubt is in the default area.
View 3 Replies View RelatedI downloaded Fedora-12-x86_64-DVD.iso and placed it on a 16GB USB drive using the Windows LiveUSB creator which had downloaded when I first download Fedora 11.The USB boots fine and I choose the language and the the keyboard layout. I tell it the image is on the USB drive it displays /images/install.img as the image.
However after going through all the steps up to choosing where I want it throws an error saying cannot find image #1 on the hard disk.Now if I boot again and instead of choosing the USB drive I hit F2 and then choose the USB drive then /Images then the install.img and press O.K. it says it isn't and just cycles around the choose drive/image.
I decided today to try Xubuntu on my netbook.I downloaded an ISO of it, formatted my old 2GB Sandisk Cruzer Micro, and used Unetbootin to copy all the stuff onto the drive.Of course with flashing cursor after "boot:". So I tried rewriting with Unetbootin, and then even tried writing an ISO of Kubuntu to the flash drive.Each and every time, I get the same message.
View 5 Replies View RelatedIn order to not post into the wrong forum, I am wondering if an issue related to performing a PXE based NFS install can be posted here, or does it belong in the networking forum? Seems that I've seen both, and I've done several searches using parameters/error messages that I'm seeing and can't seem to find a post that relates.
I have results of "./getinfo.sh network", and other necessary config file info ready to post, but want to make certain on correct forum.
I seem to have determined a few other things about my "only gets as far as a GRUB command line" problem:To recap, sda3 (GRUB hd0,2) is the main Linux partition; sda9 (GRUB hd0,8) is the boot partition.GRUB is 0.92.Installation was from an 8.04LTS live CD (at least, that's what the envelope says it is)/"/boot/grub" (i.e., "/grub" on sd9/hd0,8) contains a "menu.lst" file. I modified it (had to do a "sudo gedit" from a command line!) to (1) comment out the line that hides the boot menu, (2) change the timeout from 3 seconds to 90, and (3) add a menu line based on my succesful manual IPL of DOS.
It still boots to a GRUB command line. If I do a "configfile /grub/menu.lst," a boot menu comes up. DOS will successfully IPL, but Linux still gets a "no setup signature found," (ditto for "recovery mode"), which suggests either a bad kernel, or a kernel that's too big for the GRUB to handle.Why would it be finding its way to grub, but not finding the boot menu file?Why would the live CD come up just fine, yet the GRUB and kernel it installs fail?
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
View 9 Replies View RelatedI just downloaded the newest version of Ubuntu onto a USB drive. I put it into my computer and when it was loading Ubuntu, it said "Could not find kernal image: vesamenu.c32".
View 8 Replies View RelatedI have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
I install fedora on my usb-hdd. Sometimes i boot it from real machine, sometimes i boot from virtual machine (kvm). When I boot from real machine, hdd driver is usb-storage, when i boot from virtual machine hdd drivers are ata_generic and pata_acpi.
Everytime i update kernel, mkinitrd only create initrd image contains only hdd driver current running, and I must recreate initrd manual with all preload hdd driver. How to config fedora to everytime update kernel, mkinitrd can make initrd image with all hdd driver I need?
What do I need to grab for my install media/type in order to get a Fedora 13 32bit PAE install?
Also, do I need to do anything special to get a PAE kernel on a spin vs. the default Fedora?
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
I already download Fedora 15 from website As ISO Image , How I can create Bootable CD Image? and it possible but it in USB as bootable
View 3 Replies View RelatedGoing from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
Yesterday, i just got my Fedora live DVD. When i tried to boot it from my CD/DVD ROM drive, it seems to hang when it's just about to finish loading. From one of the prevous threads, one of the members said that i had to have 2 partitions on my HD. Currently, i already have 2 partitions. Can someone give me advice on what to do??
View 3 Replies View RelatedI didnt know where to ask this question but if anyone could direct me I would appreciate it.I would love! to remove the fedora Boot image progress bar when I choose to run Fedora, Is it possible to have this removed and just show my the inner working's like it did with older linux distros? where it has the lovely
blahBlah [OK]
blahBlah [OK]
blahBlah [OK]
[code]...
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
I recently did a fresh install of current and once I had it up and running I compiled a fresh 2.6.33 kernel using my old config file, but now I get this warning durning boot, specifically during module loading WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release. This doesn't seem to be causing any problems but I am curious to know what the message meams? I checked /etc/modprobe but everything looks normal.
View 1 Replies View Relatedi have been working with computers since the age of 11 "22 now" and have taught myself everything i know, from computer repair & networking to Web design, music production and Graphics design, using programs like photoshop, dreamweaver, sony acid, i learned it all myself, anyways that's just a little insight!!!
OK so here is my problem, i have an OLD P4 2.8 GHZ PC with 512MB ram, last year i was able to burn i believe fedora 9 to a CD and install it on this PC before i removed the drive to use as an external drive. "Dont know where the CD went"
I just recently purchased a 40GB hard drive and am looking to reinstall Fedora 14 on this P4 PC, i want to use this PC as a HTPC just for internet, ..... and stream videos, maybe some internet games etc etc, my problem is my main PC cant burn any cd/dvds due to the Drive's being burned out from burning xbox games at 4x on a regular basis, the PC i want to install Fedora on only accepts CD's and even then it barely reads anything!!
Now that you know my situation i want to know if i can take the 686MB 32bit iso image and put it on a 2GB usb drive and boot/install it to the HD that way on my old P4 PC, i want Fedora 14 as my main desktop, no partitions or walk arounds. If this helps the mobo on that OLD pc with the P4 is a p4vmm2 v5 i believe the p4 is 2.8ghz, ram is 512mb and i was able to install a 64mb nivida card agp 4x over the stock 32mb agp card it came with!
Last year windows xp was sketchy on it, i installed i think Fedora 9 and it ran great, but at that time it was a 120GB maxtor ide, and i decided to use it as an external drive for my main pc to back up alot of goodies, in the end the drive just randomly stopped working and just a few faint clicking sounds before it died. The current hard drive i will be installing on this P4 P4VMM2 mobo is a 40GB Seagate 7200. In the end do you think i can do a HD install from a USB stick with this P4VMM2 MOBO with a 40GB Seagate 7200 HD.
's/ARCHTYPE=i386/ARCHTYPE=x86/'If your looking for a kernel image in /usr/src/linux/arch/i386/boot, your not likely to find one.
View 3 Replies View RelatedI tried to dual boot Fedora on a vista system. Now fedora boots as primary and when i try to boot vista i get the message, bootmgr missing control, alt, delete to restart.
View 10 Replies View Relatedi want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies View Related