I decided today to try Xubuntu on my netbook.I downloaded an ISO of it, formatted my old 2GB Sandisk Cruzer Micro, and used Unetbootin to copy all the stuff onto the drive.Of course with flashing cursor after "boot:". So I tried rewriting with Unetbootin, and then even tried writing an ISO of Kubuntu to the flash drive.Each and every time, I get the same message.
View 5 RepliesI just downloaded the newest version of Ubuntu onto a USB drive. I put it into my computer and when it was loading Ubuntu, it said "Could not find kernal image: vesamenu.c32".
View 8 Replies View RelatedIn order to not post into the wrong forum, I am wondering if an issue related to performing a PXE based NFS install can be posted here, or does it belong in the networking forum? Seems that I've seen both, and I've done several searches using parameters/error messages that I'm seeing and can't seem to find a post that relates.
I have results of "./getinfo.sh network", and other necessary config file info ready to post, but want to make certain on correct forum.
I am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
Code:
# livecd-iso-to-disk /home/jorge/downloads/Fedora-11-i686-Live-XFCE/Fedora-11-i686-Live-XFCE.iso /dev/sdb1
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
View 9 Replies View RelatedI'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Replies View Relatedbasically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
I just built this computer with a bunch of old parts, and i put in a blank hard drive. There is no operating system on this computer yet. I put the Ubuntu Usb into the computer and made it boot from the Usb. Everything looked fine and good, until it said "boot:". It wanted me to type something in. So i clicked enter and it said "could not find kernel image: linux".
View 9 Replies View Relatedi am trying to install openSUSE from a usb pen. i have configured the BIOS to boot from Usb pen. i get "Could not find kernel image gfx boot".
View 5 Replies View RelatedI'm trying to run extract-ikconfig because I've mistakenly deleted an old kernel config that I'd like to recover. However, when running the script from the latest (2.6.32.5) tree I run into this error:
Quote:
ERROR: Unable to extract kernel configuration information.
This kernel image may not have the config info.
Coincidentally, this happens with all of my kernel images. Is it a fixable problem? I should really set CONFIG_IKCONFIG_PROC next time..
I have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies View Relatedi want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies View Relatedafter update to kernel-2.6.18-164.el5 one of the 2 NIC's of my machine are only found at 1 of 4 reboots. Using the old one kernel-2.6.18-128.7.1.el5 all is fine. This are the to NIC's:
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
And the Intel one, makes the problems with the new kernel.
I need module init tools 3.13 or higher. I have tried to install them from .debs I've found but after doing the make install it doesn't install them! then it says to do depmod but nothing works still! Also my wifi is super slow I have a realtek 8192CU. If I tether my phone my internet speeds are normal.
View 6 Replies View RelatedI want to install package kernel-image-2.4.27-2-686-smp, but when i use terminal to install , write sudo apt-get install kernel-image-2.4.27-2-686-smp but couldn't find this package. In my synaptic i can't find this package to install. I downloaded from [URL] this package kernel-image-2.4.27-2-686-smp_2.4.27-12_i386.deb ,when i install , to appear error: "dependency is not satisfiable: initrd-tools", i downloaded this package initrd-tools and install but appear this error:"dependency libdevmapper1.02", in my synaptic i saw this package libdevmapper1.02 already installed.how to install package kernel-image-2.4.27-2-686-smp from terminal or from synaptic.?
View 9 Replies View RelatedOther than the linux kernel image I am using is it ok to remove the others I have and thus gain more disk space ? I only have a small asus 900 netbook.
View 4 Replies View RelatedIn Ubuntu 11.04, grub skips directly to booting Ubuntu. I can't choose which kernel image it loads. Why is that and how can I fix that?
View 1 Replies View RelatedI've been running a dual boot set-up with Win XP and Ubuntu 9.10. The old 40 gb drive was showing signs of impending failure, so I replaced it with a new 120 gb drive, after saving an image of the old setup. After restoring the image from the original drive to the new one, Windows boots fine from the GRUB menu, but Ubuntu doesn't. I briefly see the Ubuntu "circle" then the screen goes blank. If I hit any key, I get a console screen of error messages (I can provide details if needed).
I think the problem is caused by the fact that the restore process scaled the saved image to fit the new, larger drive, with the result that the Ubuntu partition doesn't actually start where GRUB expects to find it. I'd like to recover the Ubuntu installation, but if is too big a deal, I'll just wait until 10.4 is released and do a clean install.
i was recently trying to install ubuntu 10.04 on my laptop and it wont let me. I have it booting from a usb. I have everything set up right but before it installs it tells me that a kernel image is not working or something along those lines.
View 4 Replies View RelatedI know that the second dot release of Squeeze has been released (6.0.2). Why live images still point to 6.0.1?Is that update not going to be released as live?
View 2 Replies View RelatedI've compiled the kernel 2.6.33, configured it and installed (make install)
When it boots up I get the following messages: RAMDISK: I can't find a valid disk image at 0 VFS: Couldn't open root at /boot/vmlinuz-2.6.33mykerne1 or block (0,0)
Code:
My current system configuration is:
Linux domenico-laptop 2.6.24-16-generic
/etc/boot/menu.lst
titleUbuntu 8.04, kernel 2.6.24-16-generic
[Code]....
I have Ubuntu 10.10 installed on my laptop.Its a dual boot with XP, have been using ubuntu/xp for a while now..Till now i always used to remove older kernel images after ubuntu update, then update grub and do "sudo apt-get autoclean" never had any problem at all.i skipped the second step, i removed the old kernel image and did "Autoclean" on apt-get but forgot to update grub.
Now after i have reboot, when grub loads i can see only 2 "Memtest" lines in grub list and 1 "windows xp" line.the "Linux kernel generic" line is missing. I can boot in xp (have done just that to post this) but since there is no line in grub list to boot into Ubuntu, cant boot in Ubuntu.Is there any option, something i can do at "Grub" to boot into Ubuntu?
I downloaded Fedora-12-x86_64-DVD.iso and placed it on a 16GB USB drive using the Windows LiveUSB creator which had downloaded when I first download Fedora 11.The USB boots fine and I choose the language and the the keyboard layout. I tell it the image is on the USB drive it displays /images/install.img as the image.
However after going through all the steps up to choosing where I want it throws an error saying cannot find image #1 on the hard disk.Now if I boot again and instead of choosing the USB drive I hit F2 and then choose the USB drive then /Images then the install.img and press O.K. it says it isn't and just cycles around the choose drive/image.
where can I find a DVD iso image of openSUSE-9.3 to download?
View 8 Replies View RelatedI downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
View 1 Replies View RelatedIve been trying to PXE boot a XEN kernel image in gzip format, and I was getting Invalid or corrupt kernel format error. Ive seen that other kernel images having a file type of Linux kernel x86 boot executable RO-rootFS are bootable. (both are bootable using grub anyhow).
Is there any way to convert the b/n the formats, or any other solution?
I was booting a Virtualbox instance, again I guess that shouldn't matter because pxelinux loads from tftp properly, but it doesn't even proceed to load the kernel. I think the issue here is with the image format itself rather than what it contains, or where it runs.
the things i've tried:
1. Created an asm bootloader code that calls a c function which just prints a hello message.
2. Compiled both and linked them using LD command using a .ld file available.
Steps followed from http://wiki.osdev.org/Bare_bones.I get a kernel.bin file which is of ELF format. I've set up a tftp server using tftpd32 tool and created the necessary pxelinux.cfg files.
Now how do i create a bootable kernel image out of the elf file. The steps given in the above website to create an image doesn't help.
I know that it is possible to get the kernel version from a running system using "uname" command.I have a kernel image file in linux/arch/arm/boot/uImage.Is it possible to get similar information from this image file? and how?
View 6 Replies View RelatedI installed unetbootin, and picked linux mint because i heard mint is for beginners.I use HP mini, and connected USB drive.after installation is completed, restart machine, and changed boot order,this was on screen;"Invalid or corrupt kernel image"boot:press tab key for options.
View 1 Replies View RelatedCan you please let me know where to find minimum kernel image for my ColdFire platform to boot from ? Please be informed that at this stage I am not restricted to use an specific Linux distro and just I need to have the minimum kernel image possible size.
View 6 Replies View Related