Fedora Installation :: Xen-kernel - Unable To Boot In Normal Kernel
Feb 11, 2010
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
View 11 Replies
ADVERTISEMENT
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
Feb 13, 2011
I had problems with booting my PC after kernel updates several times. In the past I just reinstalled Ubuntu and after several tries with running Update Manager things were working again.This time I applied another recommended set of updates, including a kernel upgrade and got the usual "Kernel Panic - not syncing: VFS: Unable to mount root fs on unkown-block(0,0)"After booting from a LiveCD and running boot_info_script I rebooted again and this time I am getting tons of errors which seem to be generated while running grub. After a few minutes of 'error: syntax error' and 'error: Incorrect command' scrolling through my screen, grub gives my a grub> prompt... Not what I expected!Here is the output of the boot_info_script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/mapper/isw_cagifdjehe_Volume0 and
[code]...
I have two RAIDed disks (mirrored and showing OK during POST). The disk shows above as a6071eb5-6fc6-45b3-babb-c1a2156278d7. Ubuntu 10.10 installs fine from a LiveCD, but gets broken by kernel updates. I can see the original 1 TB disk when I start with the LiveCD and I can access all the files.
View 2 Replies
View Related
Dec 19, 2010
After running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Nov 1, 2010
I am trying to install linux kernel manually, for this I had compiled linux-2.6.36 with minimum drivers and features. Note that ext2, ext3, jffs file system support and sd ata_piix drivers are set as inbuilt kernel modules.
I had two hard disk for my Intel x86 box sda and sdb. I have running linux on sdb from which I can access sda. sda has one partition sda1 as ext3 fs.
I had created following directories at sda1 root, bin, boot, etc, sbin
After compiling kernel, I had copied bzImage, system map files to boot folder. then using 'grub-install' I had installed grub on sda. after installation I edited grub.conf to setup kernel image.
grub.conf
Code:
After this I booted sda by changing HDD boot priorities,And wow I got grub prompt -- linux kernel booted but as soon as it tries to mount file system it dies with error,
Code:
I accept that I dont have binaries for init and no initialization stuff in /etc, but I think problem is I am not able to give correct rootfs to kernel.
View 3 Replies
View Related
Apr 21, 2010
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
View 6 Replies
View Related
Jun 12, 2009
there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies
View Related
Jun 15, 2009
all of the following are made through live usb creator. when i tried with F11 i686 live kde, I got the following error: Bug: unable to handle kernel when i tried with F11 x86_64 live kde then at the time of installation my screen got blurred.
View 4 Replies
View Related
Feb 23, 2011
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
View 6 Replies
View Related
Jan 21, 2010
I am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
View 4 Replies
View Related
May 1, 2010
Here's the deal: I've done a fresh F12 install on my T61. Told the installer to Encrypt the Hard Disk. The installation went fine. The kernel was 2.6.31.5. I ran a yum update, which added another kernel - 2.6.32.11, but I can't boot from that one. The newer kernel throws a an "Uncompression error -system halted" immediately.
View 3 Replies
View Related
Jul 26, 2010
If i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies
View Related
Nov 17, 2009
I am trying to install F12 on a Dell Latitude E5400 laptop. It got through the whole install process, but when it rebooted i just get a screen that says
"unable to handle kernel null pointer dereference"
and it just hangs there.
View 2 Replies
View Related
Nov 17, 2009
I just upgraded to Fedora 12 x86_64 via yum upgrade. However I have problems with booting. The new FC12 kernel won't boot. Boot output is something like
Code:
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sda to RAID set "sil_ajabaccaaidg
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdb to RAID set "sil_ajabaccaaihe
No root device found Boot has failed
I resized boot partition to 400MB, formatted it as ext4 and recopied all files, modified fstab to update boot partition's UUID. Tried to set a boot flag on boot, still, I can only boot with the old kernel from Fedora 11. Is it a Fedora 12 kernel's bug or something wrong with my setup? I don't use any RAID, and the sil error is present with Fedora 11 kernel also.
View 1 Replies
View Related
Mar 26, 2011
The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
View 2 Replies
View Related
Aug 23, 2009
I have recently updated my Fedora 11 installation which replaced my older 167 kernel with the newer 217 kernel. However, the 217 kernel will not boot completely. It will show the splash loading screen, and then will switch to a rapidly blinking cursor. This cursor blinks for about 5 seconds and then disappears. I can access terminals using ALT+F2, etc. I can log in to these terminals, but init commands do not complete (something about a binary handler). I'm not sure if something is conflicting with an update to X or what is wrong. The most recent kernel that I managed to get to work was Kernel 167, however I cannot find this kernel for download.
Sys info:
AMD Athlon 64 X2 4800+
3GB RAM
nVidia GeForce 8600GT with proprietary drivers
320GB Hard Disk with windows and linux partitions
Fedora 11 32-bit i586
View 2 Replies
View Related
Apr 12, 2011
Hello, i recently update the kernel in fedora through the GUI update manager and after restarting the new kernel wouldn't boot and i had to reboot into the old one. it freezes right after Plymouth finishes and the login screen should show up it just completely freezes, i do have proprietary nvidia drivers could it be that?
View 9 Replies
View Related
Jan 26, 2009
I'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Replies
View Related
Jun 1, 2010
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
kernel_init=0x1fd/0x257
child_rip+0xa/0x20
? kernel_init+0x0/0x257
? child_rip+0x0/x20
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
View 4 Replies
View Related
Jul 19, 2010
For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
View 8 Replies
View Related
Dec 8, 2010
I am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
View 2 Replies
View Related
Mar 6, 2010
Everything was working great with my FC12 box. I think the Fedora Gods must be punishing me as I had recently downloaded an image for another distro, but was only trying to install it to usb and play with it on another computer!
Then I tried to boot and I got an error message:
Code:
mount: you must specify the filesystem type
mount: you must specify the filesystem type
mount: you must specify the filesystem type
[code]....
Can't mount root filesystem
Boot has failed, sleeping forever. I obviously don't understand the boot process well enough to fix this problem, so I'll describe what happens in more detail. (Feel free to correct my terminology so I can communicate in a more concise manner next time!)
1) Bootloader comes up fine and I'm able to select my kernel. (This problem affects all kernels)
2) Then as usual a whole bunch of text goes flying across the screen identifying hardware.
3) During this hardware identification, at the point where all my disks are being identified sd 1, sd 2, sd 6... I get the error shortly/immediately after this.
I cant tell for certain if its immediate because so many mount messages are spewed and I am not sure how to 1) pause the screen or 2) scroll the screen or 3) output this information to a file. But it does sit long enough on the disk identification which is right before the mount errors. I was able to look at a previous dmesg and noticed that dracut comes right after the disk identification, so I think the mount errors are being generated in dracut. (Now whether dracut is the problem or not is another issue) I am able to boot using a rescue usb and mount my LVM manually and then browse the root filesystem, so at least my data seems to be safe!
my /etc/fstab:
Code:
UUID=7acf1074-64bb-4a73-9558-f9657f712756 /boot ext4 defaults 1 2
/dev/mapper/vg_willowtree-lv_swap swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
[code].....
View 11 Replies
View Related
Oct 14, 2010
I am running FC13 on a fairly old PC (PIII 500MHz, 384MB RAM, 10GB SCSI disk). It works fine using kernel 2.6.33.5-112.fc13.i686.PAE. After a series of recent updates the system now also has a new kernel 2.6.34.7-56.fc13.i686.PAE.
/boot/conf/grub.conf contains:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
code....
When I try and boot to the newer kernel I get an error like:
Kernel panic - not syncing VFS Unable to mount root fs on unknown block(0,0)
I read on the forum about a similar problem where the fix was to insert the line
initrd /initramfs-2.6.34.7-56.fc13.i686.PAE.img
but this file doesn't exist and so the boot then hangs with no messages, so I took this line out again. Here is contents of /boot:
$ ls -l
total 21148
-rw-r--r--. 1 root root 111391 May 27 04:06 config-2.6.33.5-112.fc13.i686.PAE
-rw-r--r--. 1 root root 112291 Sep 15 04:32 config-2.6.34.7-56.fc13.i686.PAE
drwxr-xr-x. 3 root root 1024 Jan 23 2010 efi
code....
As you may deduce from the above I haven't used the system much so the auto-update hasn't run for several months.
Any help on running / installing the newer kernel appreciated. Note that I am trying to install a wireless LAN card and am following instructions here: url
I got as far as
cd /lib/modules/`uname -r`
ls -l
which gave:
[root@localhost 2.6.33.5-112.fc13.i686.PAE]# ls -l
total 3300
lrwxrwxrwx. 1 root root 51 Jun 3 00:52 build -> ../../../usr/src/kernels/2.6.33.5-112.fc13.i686.PAE
drwxr-xr-x. 2 root root 4096 May 27 04:08 extra
drwxr-xr-x. 11 root root 4096 Jun 3 00:52 kernel
code.....
so I have the src files for the newer kernel not the one I am running. I thought it best to stop and think (and ask for help!) rather than break a working machine (but with no wireless LAN!)
View 3 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Jan 28, 2010
basically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
View 2 Replies
View Related
Feb 23, 2010
Finally updates are broken - I've been able to use my upgraded F12 system for some time, faithfully keeping up with f10, then f11. Just yesterday it finally broke:
Test Transaction Errors: installing package kernel-2.6.31.12-174.2.22.fc12.i686 needs 10MB on the /boot filesystem
It would appear that the most recent kernel update has broken the 10MB barrier initially set by the version I first installed (for the boot partition). Needless to say, I have quite an investment in this machine, and of course no time to back it all up and do a fresh F12 install. I am hoping someone out there can give me a bulletproof way to steal some space and expand the boot partition...
View 4 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Jun 20, 2010
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
View 10 Replies
View Related
