I just downloaded the newest version of Ubuntu onto a USB drive. I put it into my computer and when it was loading Ubuntu, it said "Could not find kernal image: vesamenu.c32".
View 8 RepliesI decided today to try Xubuntu on my netbook.I downloaded an ISO of it, formatted my old 2GB Sandisk Cruzer Micro, and used Unetbootin to copy all the stuff onto the drive.Of course with flashing cursor after "boot:". So I tried rewriting with Unetbootin, and then even tried writing an ISO of Kubuntu to the flash drive.Each and every time, I get the same message.
View 5 Replies View RelatedIn order to not post into the wrong forum, I am wondering if an issue related to performing a PXE based NFS install can be posted here, or does it belong in the networking forum? Seems that I've seen both, and I've done several searches using parameters/error messages that I'm seeing and can't seem to find a post that relates.
I have results of "./getinfo.sh network", and other necessary config file info ready to post, but want to make certain on correct forum.
I am currently running Fedora 10 XFCE on an Acer Aspire 1 (1.6ghz atom, 1.5gb ram, 8gb ssd). I am trying to install Fedora-11-i686-Live-XFCE via USB stick (Kingston 4gb) and am having no luck. I downloaded the .iso via bittorrent. If I use liveusb-creator: .iso passes checksum, installs boot image, installs syslinux, claims it's complete. When I try to boot, or simulate booting with qemu, I get the message "Could not find kernel image: linux" If I use
Code:
# livecd-iso-to-disk /home/jorge/downloads/Fedora-11-i686-Live-XFCE/Fedora-11-i686-Live-XFCE.iso /dev/sdb1
it says that the .iso passes checksum, installs live image, updates boot config file, and setup USB stick as a live image. Once again though, when I try to boot, or simulate booting with qemu, I get the same message "Could not find kernel image: linux"
I've been trying to get a live stick of OpenSUSE 11.2 running and I continuously get a script of "boot: could not find kernel image: gfxboot" running down the screen. Any other version of Linux will run fine off this same USB and I have not seen this error cited anywhere on these forums or Google.
View 9 Replies View RelatedI've been running a dual boot set-up with Win XP and Ubuntu 9.10. The old 40 gb drive was showing signs of impending failure, so I replaced it with a new 120 gb drive, after saving an image of the old setup. After restoring the image from the original drive to the new one, Windows boots fine from the GRUB menu, but Ubuntu doesn't. I briefly see the Ubuntu "circle" then the screen goes blank. If I hit any key, I get a console screen of error messages (I can provide details if needed).
I think the problem is caused by the fact that the restore process scaled the saved image to fit the new, larger drive, with the result that the Ubuntu partition doesn't actually start where GRUB expects to find it. I'd like to recover the Ubuntu installation, but if is too big a deal, I'll just wait until 10.4 is released and do a clean install.
I'm new to fedora and when I boot from a cd I get the message: could not find kernel image. I currently have windows xp and my motherboard is and ix38 quad gt if that helps.
View 2 Replies View Relatedbasically put a new hard drive in my old computer and wanted to install fedora on it, downloaded fedora 12 dvd iso (3ish gb in size) have burnt it to a dvd disc, turned my laptop on and set it to boot from cd drive, restarted it, it reads the disc and displays the following message:
ISOLINUX 3.75 209-04-16 ETCD Copyright (C) 1994-2009 H.Peter Anvin et al
Could not find kernel image: Linux
boot:_
The uderscore is flashing and i can type stuff in but have no idea what to type in to find the kernel image, or why it cant find the kernel image.
I'm trying to run extract-ikconfig because I've mistakenly deleted an old kernel config that I'd like to recover. However, when running the script from the latest (2.6.32.5) tree I run into this error:
Quote:
ERROR: Unable to extract kernel configuration information.
This kernel image may not have the config info.
Coincidentally, this happens with all of my kernel images. Is it a fixable problem? I should really set CONFIG_IKCONFIG_PROC next time..
I just built this computer with a bunch of old parts, and i put in a blank hard drive. There is no operating system on this computer yet. I put the Ubuntu Usb into the computer and made it boot from the Usb. Everything looked fine and good, until it said "boot:". It wanted me to type something in. So i clicked enter and it said "could not find kernel image: linux".
View 9 Replies View Relatedi am trying to install openSUSE from a usb pen. i have configured the BIOS to boot from Usb pen. i get "Could not find kernel image gfx boot".
View 5 Replies View RelatedI was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
I've compiled the kernel 2.6.33, configured it and installed (make install)
When it boots up I get the following messages: RAMDISK: I can't find a valid disk image at 0 VFS: Couldn't open root at /boot/vmlinuz-2.6.33mykerne1 or block (0,0)
Code:
My current system configuration is:
Linux domenico-laptop 2.6.24-16-generic
/etc/boot/menu.lst
titleUbuntu 8.04, kernel 2.6.24-16-generic
[Code]....
the things i've tried:
1. Created an asm bootloader code that calls a c function which just prints a hello message.
2. Compiled both and linked them using LD command using a .ld file available.
Steps followed from http://wiki.osdev.org/Bare_bones.I get a kernel.bin file which is of ELF format. I've set up a tftp server using tftpd32 tool and created the necessary pxelinux.cfg files.
Now how do i create a bootable kernel image out of the elf file. The steps given in the above website to create an image doesn't help.
I know that it is possible to get the kernel version from a running system using "uname" command.I have a kernel image file in linux/arch/arm/boot/uImage.Is it possible to get similar information from this image file? and how?
View 6 Replies View RelatedI installed unetbootin, and picked linux mint because i heard mint is for beginners.I use HP mini, and connected USB drive.after installation is completed, restart machine, and changed boot order,this was on screen;"Invalid or corrupt kernel image"boot:press tab key for options.
View 1 Replies View RelatedCan you please let me know where to find minimum kernel image for my ColdFire platform to boot from ? Please be informed that at this stage I am not restricted to use an specific Linux distro and just I need to have the minimum kernel image possible size.
View 6 Replies View RelatedI wanted to Upgrade from Fedora 13 to 14 and downloaded the Upgrade Image using the Pre_Upgrade Installer. My system downloads the upgrade just fine but when it starts to perform the it asks for the location of the new Fedora 14 ISO and I have no idea where that is or what to enter as a possible location which I have no doubt is in the default area.
View 3 Replies View RelatedI used kernel 2.6.5 in vmware I copied new kernel 2.6.37 image and initrd from other machine,to replace the current one after reboot,the initrd.img can be loaded,but soon it report "/dev/sda1 not found, waiting for I need to do anything in initrd.img to make it recognize "/dev/sda1" device? /dev/sda1 is vmware scsi disk.
View 3 Replies View Relatedi want to image my pen drive using dd command. i tried
dd if=/media/disk of=/media/disk-1/images.img
where disk is my pen drive and disk-1 is my hard disk. I boot and run the pc using linux bootable cd
I've performed a clean install of Linux on my system, and would like to create a snapshot of my whole disk so that I can go back to a fresh state immediately.
I used to use DriveImage XML and it was a FANTASTIC program, but unfortunately the boot CD containing it can only be created by having Windows installed. So it might be time to explore a new program that is equally simple and effective as that one.
I'd like your recommendations of imaging programs that are free, and that work off a boot CD/DVD (because the live backup thing generally takes much longer for imaging an entire disk).
One thing I liked about DriveImage XML was that it stored the backup in a fairly readable format, so if one day DriveImage XML were no longer available you wouldn't lose your backed up data. Any such programs?
Also, would these programs work for a drive that contains an encrypted root partition (i.e. enabling the encryption checkbox in the CentOS installation)?
I have what I thought was a simple task of creating ISO images of my Windows 7 system partion and boot partiton (the C drive) on my physical hard drive that I could use to load Windows 7 onto a virtual machine. Anyway, I'm running Ubuntu off the CD drive and I can see my drive partions (checked using the fdisk -l command). I have tried many iterations of the mkisofs command, but no matter what I do I get the error message: unable to open disk image file 'dev/sdb/win7sys.iso'. I don't understand why it's trying to open an ISO file it is supposed to be creating. The -o FILE option sets the output file name, so the message makes no sense to me. Below is an example of a simple and longer version with more options that I have tried to create an image of my sytem partiton (sda1) and save it on an external drive (sdb) with the file name: win7sys.iso (the next step I think would be to create or merge both partition images as one iso file for the VM). But I can't get past this error.
Can anybody tell me what I'm doing wrong?
sudo mkisofs -o dev/sdb/win7sys.iso /dev/sda1
sudo sudo mkisofs -input-charset iso8859-1 -V win7sys -o dev/sdb/win7sys.iso /dev/sda1
* Note that the output after the -o parameter is the desired destination /dev/sdb (my external drive) for the image file and /dev/sda1 is my Windows 7 system or boot partition (sda2 is what Windows sees as the C drive).
I created a VM disk image with kvm-img, but I forget what was the max size of that disk image when I created it. Currently, its size is 6.2G, I want to install some large packages in that VM, so I want to make sure the disk image can expand to an adequate size.
View 1 Replies View RelatedI have downloaded the i386-DVD.iso image and have burned it on a DVD using Nero Express 6, when it boots from the DVD, it give me an error message "Could not find kernel image: Linux" and the boot: prompt after that. I have burned another DVD using Infra Recorder with minimum write speed but with the same problem. I have Ubuntu already installed on the computer.
View 8 Replies View RelatedI want to make an image of a 300GB hdd and I'm looking for a program that can do this.
There's one hdd with one single partition, 300GB size and I want to create an image of the hdd. To make things more clear, I want a mirror of a hdd.
Thing is, I have a server machine over the internet, which has a 300GB hdd single partition and I want to copy its contains, including OS.
I know Acronis, I worked with it before, but... idk if it has a gb limit when creating a image of a hdd. Acronis can backup/restore images of a hdd via internet, if you have an acronis server.
Let's put it this way, I don't have time (liek always... sorry 'bout that, but I'm not lazy, I just don't have time ) to search for a program and to make tests, and I would like a little help, maybe point to a program / solution that you guys have been tested.
- Remember it's a single 300GB hdd with a single partition. I want to copy the hdd over the internet, that's why I'm pointing to a program that can makes an image of that hdd over the internet.
Like... it's not that I want especially a program that can do this, maybe there's other solution aswell. Just feel free and share your solution/opinion whatever.
I acquired an old IBM Thinkpad 770e the other day and it runs fine but I have an issue installing Linux on it. It has a floppy drive in it not a cd drive. It also does not have an ethernet jack or wifi.
I did clone my external firewall image to the drive but that image is partitioned in such a way to make it impractical for a laptop/desktop system. So I know that the machine will boot off a floppy and it will run off the hard drive. The bios test utility reports no hardware problems.
What I had hoped to do was to install some suitable distro to it. Not sure which one yet, any recommends? Damn Small Linux would be good except that you are limited to what they offer. I would also prefer to stay with a debian based distro.
The issue is install media. Floppy install images are not practical, and there is no cd drive. Is it possible to boot off a floppy and then chroot to, say a usb flash drive to do the install?
I do have a wifi card (d-link DWL-G650) that fits the micor-channel slot but it requires the madwifi driver which needs the kernel source and depends to be able to install. Not something that normally works out of the box so to speak.
Another question that comes to mind, Is it possible to dd a usb boot image to a hard drive and have it work?
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies View RelatedImage Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI have never used rsync before, only DD. But from what I have been reading, rsync is better becasue it will basically mirror your hard drive, thus being able to run the cloned software from the new hard drive. My problem is I do not know what is the best commands or even the basic commands to use in rsync. I am trying to make an image from a external hard drive to a usb drive. That way my chances of messing up he original software is not as risky becasue I'll just restore the image onto another hard drive. Does anyone know the best script to have rsync make an image file of a hard drive and place it on a usb drive and then restore it?
View 8 Replies View RelatedCode:
How do I know what option means what to compile my own kernel? How to find support for different hardware in this mess (and exclude it)?