Fedora Installation :: Isolinux Disk Error 20; AX=4280, Drive EF?
Feb 7, 2010
1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
Our NAS drive just packed in so I thought I'd quickly build up a ubuntu server. Got two 500gb sata drives in raid mirror trying to install the latest iso of ubuntu server, but it all loads up to the point where you choose what to install, and pretty much whatever you select returns, booting from local disk, isolinux: disk error 40.....hit any key to retry, which of course restarts the system and the horrible sequence starts again
I've just rewritten the disk and its still playing silly buggers
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start. I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error: isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
building an install cd or dvd media that will automatically install the Linux software on a client pc. There is no network connectivity so the client can only be loaded with Linux from CD or DVD media. The crux of the matter is that I can not automatically install the Linux software on client WITHOUT typing linux ks=cdrom:/ks.cfg at the boot prompt.
I want to avoid any user prompts and just have the software install with the RPMS that I need for this client pc at the boot prompt. Actually, when the boot prompt commences, I would like the software install to start with no user intervention. I've tried several different methods in isolinux.cfg, but the OS always wants boot prompt for the cdrom. Can the boot prompt information be read automatically from the isolinux.cfg with out user intervention? I'm looking for the same behavior as a LIVE CD that kicks off with no boot prompts after a few seconds. Here's a copy of my isolinux.cfg
default linux prompt 1 timeout 600 display boot.msg F1 boot.msg F2 options.msg F3 general.msg F4 param.msg [Code]....
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
I am trying to install 10.10 from a Live CD over my 9.04 (it would not do the upgrade automatically due to apparently lack of disk space.) at the end of the my best guess at the process (alas, Linux is pretty much a plug and pray operation for me.), on rebooting, I get the message: "the disk drive for / is not ready yet or not yet present" I must have messed up at the Allocate Drive SPace / Edit Partition step. I have three existing partitions:
7Gb for OS previously 9.04 35GB for data (which I clearly don't want to mess with) a a bit for Swap.
So, I have clicked on the 7GB partition /dev/sda1 and have another window, Edit Partition, which is asking me: New partition size (I would just leave it at 7007) Use As (I presume I can leave it as EXT4?) Format the Partition (NO unchecked?)and Mount Point? Now here is where I don't have a clue. The pull down options are:
/, /home, /boot, /tmp, /usr, /var, etc.
not knowing any better, my first time through I just picked "/" and that is what got me to the message "the disk drive for / is not ready yet or not yet present" So what should I be specifying at this point?
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
I was going about tweaking it and preparing it to my needs, While installing through yum I dont have much other than the fact that I have to search for the packages. But when I open "Add/remove software" of Fedora. I am greeted with " No space left on the disk" and when I seek for more details it says " Disk Error :[errno 5] Input/output error"I did some research and I saw that it usually occurs during installation, but here I have successfully installed it.Can someone help me with it? Later on I even had notification of the same warning. And mind you I got loads of free space.
I'm trying to install F12 from the install DVD that I torrented but it's giving me a disk error when I try to install. The DVD loads but when I go to install, it crashes when loading initrd.img, saying:
isolinux: Disk error 10, AX = 4209, drive EF
Boot failed: press a key to retry...
The DVD iso does pass the SHA256 hash test, so that doesn't seem to be the problem. I'm using Roxio Easy Media Creator 9 to write the DVDs, which it seems to do without any problems. The only thing I haven't ruled out is Roxio - is this the problem or is there something I'm missing? If it is the problem, any suggestions for a better free Windows DVD burning program I could use?
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
I am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
I'm trying to upgrade, but have this issue: usually I download the DVD iso, run checksum, burn it, test the disk, and when found ok, I run the upgrade. Now, however, I keep getting "disk not ok" at 95% of the disk test. I have downloaded and verified the iso twice, used 2 DVD's, 2 different DVD-drives, 2 different computers and keep getting this error at 95%.
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
I finally gathered my courage to install Fedora 12 on my laptop. I burnt a DVD to make the install. But it gives an error saying:Error processing drive/dev/sda.
This sounds scary, because I don't want to format my WHOLE hard disk, I only want to format the several partitions on which I want to install F12.
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
I'm installing RHEL 4.x to a hard disk that already has windows 7 enterprise installed. I would like to dual-boot both the OSes. The hard drive size is about 220 GB (of which windows 7 occupies about 50 GB).Now, is there any free and friendly tool that I can download to partition this drive ?RHEL comes with a text mode (disk druid) to partition and I could not figure out how to resize the existing windows partition. So, I'm assuming that I need to abort the linux install now and proceed to boot from another CD that contains a good partitioning tool and then later resume boot from RHEL install disk.Also, what should my partitions look like ? What size should they be ? The system is a new LENOVO with 4 GB RAM on a i5 core processor.I know that I will need atleast 5 partitions. right ?1) /boot2) /3) /home4) swap5) /var
I've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
i was using vista in my laptop, recently installed ubuntu in another drive partition which is 69 GB. but during ubuntu installation i gave only 16GB to ubuntu from this drive. i guess the remaining 69 GB - 16 GB = 53 GB is unused space now.. now how can i allocate all 69GB in that drive to ubuntu ?
