Debian Installation :: Non-system Disk Or Disk Error ?
Jan 22, 2011
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
View 6 Replies
ADVERTISEMENT
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Oct 17, 2010
I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Aug 9, 2010
I got a HP mini 5102 yesterday and decided that Win7 wasn't doing it for me so I would put ubuntu netbook remix (10.04) on it. Set up a usb stick with the installer (using universal usb creator) and booted from it.
I decided that I would do a full install of ubuntu as I have no need for windows on this machine, hence I left no partition for windows when doing the install. The install went fine but when the machine restarted I was faced with a black screen and the error message "Non-system disk error".
At first I thought that I had messed up the boot order and it was trying to do a network boot as I was getting "PXE-E61: Media Test Failure", so I changed the boot order and fixed that problem but am still getting the non-system disk error.
I figured that I would try and boot from the usb again and see if I could redo the install or just boot from it for the time being but when I tried that I got the non-system disk error again (though, this time if I hit any key when the error message is showing it quickly flashes "geom error" before going back to non-system disk).
View 1 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Feb 27, 2011
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
View 1 Replies
View Related
Jun 17, 2010
I am a long time Windows user and attempting to install Ubuntu Netbook 10 on my Acer Aspire netbook.I followed the steps:1) Downloading the Ubuntu ISO to my netbook hard drive.2) Installed Ubuntu from the netbook HD to USB using USB universal installer (also using the universal installer to format the USB)3) Set bios to first read USB deviceI receive the following message during the boot "Invalid system disk. Replace the disk, and then press any key.I have retried this process several times.
View 2 Replies
View Related
Feb 19, 2011
I was trying to install Ubuntu desktop and laptop edition on a Sony Vaio netbook from a USB drive, but after I select the entire disk to be used and hit enter I get this message No root file system is defined. correct this from the partitioning menu. If I try to start windows I just get s black screen.
View 9 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
May 8, 2011
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" {
insmod part_msdos
insmod ext2
set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
View 8 Replies
View Related
Feb 26, 2011
I have downloaded NETINSTALL disk from debian.org burned it and during installation it says that error and inst will not continued. This disk havent error replace disks and reburned them. On this computer debian 6 has been installed two weeks ago. "Running post-installation trigger fontconfig" on this stage i have fail.
View 6 Replies
View Related
Dec 30, 2010
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
View 4 Replies
View Related
Feb 9, 2011
This is my specific solution to my specific problem. After updating to Squeeze from my prior Lenny distro (amd64 with whole disk encrytion using LVM2, dm-crypt, LUKS) everything went well - at first. I was duped like so many, thinking that all was well and I could remove the legacy-grub (aka: Grub1) and just use grub-pc (aka: Grub2). As soon as I removed the legacy-grub and rebooted my laptop, I was confronted with:
GRUB Loading stage1.5 GRUB loading, please wait..Error 15 At this point I wasn't sure if it was a Grub problem or a deeper encryption problem - especially after reading that some people had missing packages in Squeeze (lvm2, dm-setup, initramfs-tools, etc.)
Okay, the solution for me.
1. download and burn to disk: debian-live-6.0.0-amd64-rescue.iso[URL]..
2. scroll to and press enter/return on: text rescue
3. choose a root directory - for example: /dev/blah/root (I wrote down the list of possible /dev/.... for reference - this helped me remember where and what I had partitioned in Lenny)
4. choose: Execute a shell in /dev/blah/root
5. once in the shell, I discovered I needed to mount a few of those partitions that I had written down in order to get access to grub-probe, update-grub, grub-install, etc. You may not have to if your partitions are minimal. I you need to use other partitions, type (for example):
[Code]...
View 1 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Sep 25, 2009
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies
View Related
Feb 17, 2016
I received the following error when I got home from work today. If this was a windows environment, my first inclination would be to boot off my dvd and then run a chkdsk on the drive to flag any bad sectors that might exist. But there's a complication for me.
Code: Select allThis message was generated by the smartd daemon running on:
host name: LinuxDesktop
DNS domain: [Empty]
The following warning/error was logged by the smartd daemon:
Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Device info:
WDC WD5000AAKS-65V0A0, S/N:WD-WCAWF2422464, WWN:5-0014ee-157c5db9a, FW:05.01D05, 500 GB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.The original message about this issue was sent at Sun Feb 14 13:43:17 2016 MST.Another message will be sent in 24 hours if the problem persists.
From gnome-disks
Code: Select allDisk is OK, 418 bad sectors (28° C / 82° F)
I did a bit of reading and it seems that most people suggest using badblocks to first get a list of badblocks from the drive and save it to a file. Then use e2fsck to then mark the blocks listed in the badblocks file as bad on the hard drive. My problem here is that this drive is part of a RAID5 array that hosts my OS. I wanted to confirm if this was still the correct process.I boot to my Live Debian disk, stop the raid array if it's active. Then run badblocks + e2fsck commands on the drive in question and then reboot.
View 1 Replies
View Related
May 25, 2010
I have a computer I recently uninstalled the operating system from and was wanting to use Linux Ubuntu. After burning the cd and trying to install it to the computer it gives me "Invalid System Disk, Replace then disk and press any key." I am unsure how to start this and I am not even sure if I have all the files, I need to install the Linux Ubuntu 10.04 operating system step by step.
View 4 Replies
View Related
Mar 15, 2009
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Jul 14, 2010
I am trying to install Oracle ebs and it falls over with this message:-
Code:
File Space Check :
-- database node space checks --
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = /d01/oracle/VIS/db/tech_st/11.1.0
required = 9967.0
actual = 9898.0390625
[code]....
View 3 Replies
View Related
Oct 11, 2010
I'm very new to linux and running debian 4.0. On boot got an error:
I did a ghost image of drive before I do any more damage and when performing the ghost, ghost stated I need to run fsck. I created the image and noticed that a lot of folders were missing (bin, boot and others).
1. How do I run check disk from an boot disk?
2. Is there something else I should consider?
View 1 Replies
View Related
Mar 21, 2011
I have a netbook I'm not using and which I transformed into a server with Apache, Tomcat6, Netatalk, Webmin, BIND9 and Tor.
Problem is, the disks never stop spinning because all of the programs write a few kb at least every few seconds to disk, even when nobody is connected to it.
My question is: Is there a way to have the computer boot from disk like normal (maybe even a squashfs), keep ALL CHANGES to ram and then save to disk when either the ram is full (unlikely because the server is rebooted every few days) or at shutdown?
I thought about a mixture of ramfs and unionfs but I'm not good enough yet...
View 4 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
May 9, 2010
I installed Debian squeeze amd64 (using LVM with ext4 for /, /home, and ext2 for /boot). This is on a whole hdd on its own. Before I installed it, I have win7 on it. There is also another hdd with winxp. The dual boot loader is in the hdd. After I installed Debian, grub 1.98 was installed. After reboot, grub says "welcome", and after 10 seconds, it says "error: no such disk". It went on to display the menu with a choice of my debian and MS windows.
There does not seem to be any effect of this "error:no such disk". However, after I chose Debian to boot, gnome comes on, and I typed in the username and password. The screen goes blank for about 30 seconds before my desk top comes on.
I have 2 questions:
1. How do I fix my grub "error:no such disk" message?
2. Is there something wrong with a 30 seconds delay for the desktop to show after typing username and password, and if so, what can be done?
View 3 Replies
View Related
Apr 20, 2009
i have been away from linux for a long while and decided to try it out again. i just received a fedora 10 dvd and went to install it.it wouldn't boot on either my laptop or pc?so i explored the disk and realised its a source disk?
1 = is the dvd disk any good to me?
2 = how can i install fedora from the disk or do i need to get another disk?
View 5 Replies
View Related
Aug 17, 2010
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
View 3 Replies
View Related
