Ubuntu Installation :: Isolinux Disk Error 40 On Install / Fix It?
Sep 16, 2010
Our NAS drive just packed in so I thought I'd quickly build up a ubuntu server. Got two 500gb sata drives in raid mirror trying to install the latest iso of ubuntu server, but it all loads up to the point where you choose what to install, and pretty much whatever you select returns, booting from local disk, isolinux: disk error 40.....hit any key to retry, which of course restarts the system and the horrible sequence starts again
I've just rewritten the disk and its still playing silly buggers
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start. I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error: isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
I am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
I have a dual boot machine (Win XP + Ubuntu 9.10 on separate physical drives) which was working fine. I now want to replace the Ubuntu 9.10 with LinuxMCE which is based on Ubuntu 8.10. Using the LinuxMCE install disk, I did a fresh install of Ubuntu 8.10 over the top of Ubuntu 9.10 (repartitioning the whole drive). On reboot, I now get a Grub "no such disk" error. I have run the boot info script which produced the following RESULT.txt:
Code: Boot Info Summary: => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=6a59ab9e-041f-41e2-b27c-02b8ada4c1af)/boot/grub. => Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst. => Windows is installed in the MBR of /dev/sdc
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem?
Downloaded Ubuntu 10.04.1 Desktop AMD64, tried to install it to a cleand HDD using the whole HDD, i.e. gave it permission to use the whole HDD. Installation process appeared to run OK but when it came to the restart it just fired up the message
error: out of disk grub rescue>
I've searched this forum and found numerous references to these error messages but cannot make head nor tail of the diagnostic suggestions. Apart from anything else they suggest strings of command lines which I don't understand and can't enter anyway since they don't correspond to my keyboard layout (if I hit > or ) something completely different appears on the screen). Is there someone here who can provide a step-by-step solution in lay language ? Or is there such a thing as a bootable file which can be downloaded and inserted into my CD drive to correct this problem ?
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
I've been running my Dell Mini 9 with the latest alpha for 10.04 since January, but over the weekend I botched things pretty badly and decided to go back to 9.10.I saved my home directory to another machine, and proceeded to install from a 9.10 USB disk. Things didn't go terribly well (I kept seeing "devkit-disks-daemon" crashing) but the install did complete. I shutdown the netbook, yanked the USB drive and powered it back on only to be greeted the grub menu. Choosing any option yields: Code:error: out of memoryPress any key to continue...I did a little searching in places like:HTML there is no mention of that problem there, and running though the command line instructions has the same results. (the linux command seems to be the problem)I've tried re-installed grub from the directions on the page but it is failing with:
Code: cp: cannot stat '/mnt/boot/grub/ufs1.mod': Input/output error When I look up that file I see:
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
building an install cd or dvd media that will automatically install the Linux software on a client pc. There is no network connectivity so the client can only be loaded with Linux from CD or DVD media. The crux of the matter is that I can not automatically install the Linux software on client WITHOUT typing linux ks=cdrom:/ks.cfg at the boot prompt.
I want to avoid any user prompts and just have the software install with the RPMS that I need for this client pc at the boot prompt. Actually, when the boot prompt commences, I would like the software install to start with no user intervention. I've tried several different methods in isolinux.cfg, but the OS always wants boot prompt for the cdrom. Can the boot prompt information be read automatically from the isolinux.cfg with out user intervention? I'm looking for the same behavior as a LIVE CD that kicks off with no boot prompts after a few seconds. Here's a copy of my isolinux.cfg
default linux prompt 1 timeout 600 display boot.msg F1 boot.msg F2 options.msg F3 general.msg F4 param.msg [Code]....
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
i finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
I would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
i have been away from linux for a long while and decided to try it out again. i just received a fedora 10 dvd and went to install it.it wouldn't boot on either my laptop or pc?so i explored the disk and realised its a source disk?
1 = is the dvd disk any good to me? 2 = how can i install fedora from the disk or do i need to get another disk?
I have a Dell machine with two hard drives that has Windows XP Home on the first disk (sda) and I just installed Karmic to the second hard disk (sdb) and when the install finished installing Grub2 to the MBR and the system restarted, I get the no such disk error and the grub rescue prompt. There is no option in BIOS to boot from the second disk. What do I need to do to get this working?
Firstly, I'm ubuntu-naive so things may need to be explained painfully slowly. Secondly, I tried doing a search for similar problems but I had a hard time following the solutions so rather than just jump on another thread I figure i'd start a new one.I am trying to move on from XP and tried setting up 9.10. I did the LiveCD; followed the installtion prompts and installed, and restarted. Following restart I get the following;GRUB loading.error: no such diskgrub rescue>I've tried doing the boot info script lines but I keep getting "unknown command sudo" msgs.I can't get beyond this point.
I got a HP mini 5102 yesterday and decided that Win7 wasn't doing it for me so I would put ubuntu netbook remix (10.04) on it. Set up a usb stick with the installer (using universal usb creator) and booted from it.
I decided that I would do a full install of ubuntu as I have no need for windows on this machine, hence I left no partition for windows when doing the install. The install went fine but when the machine restarted I was faced with a black screen and the error message "Non-system disk error".
At first I thought that I had messed up the boot order and it was trying to do a network boot as I was getting "PXE-E61: Media Test Failure", so I changed the boot order and fixed that problem but am still getting the non-system disk error.
I figured that I would try and boot from the usb again and see if I could redo the install or just boot from it for the time being but when I tried that I got the non-system disk error again (though, this time if I hit any key when the error message is showing it quickly flashes "geom error" before going back to non-system disk).
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer. The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading error: no such disk grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem. The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
I've installed Ubuntu Server V9.10 (64-bit) on a brand new server I built with no previous OS installed. The drives are two Hitachi 1 Tbyte hdd's configured as RAID1, an ASUS M4A78T-E motherboard with an AMD Phenom-II cpu with 8 Gbyte of memory. I updated the bios following building the computer.
The Ubuntu 9.10 server installation appears to go without error. However, on reboot I get the message:
Grub loading error: no such disk grub rescue
I suspect the MBR is missing or Linux is not pointing to the correct drive in the grub.cfg.
I'm a noob to Linux. I've made sure the boot order is correct, but other than that I don't really know the commands or syntax to troubleshoot this problem.
The only CD I have is the Ubuntu 9.10 server ISO I downloaded and burned to dvd.
I think im getting this error because I didnt allocate enough space to the Ubuntu partition when I installed it. How do I allocate more space to the Ubuntu partition? If this is not possible, is it possible to install 10.04 from my Windows?
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
