Fedora Installation :: Installing On New Disk But Killed Old Install Of Fc8 On Another Disk
Mar 15, 2009
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies
ADVERTISEMENT
Apr 20, 2009
i have been away from linux for a long while and decided to try it out again. i just received a fedora 10 dvd and went to install it.it wouldn't boot on either my laptop or pc?so i explored the disk and realised its a source disk?
1 = is the dvd disk any good to me?
2 = how can i install fedora from the disk or do i need to get another disk?
View 5 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Jun 3, 2010
I am trying to install Fedora 13 on a new system from CD. DISK 1 runs but terminates without using disks 2-5. There is a system I can access as 'root' but I was not prompted to create a unique user or which packages should be installed.How do I complete the process?
View 1 Replies
View Related
Jun 15, 2010
I am trying to upgrade from version 11 to v13. I have tried using preinstall as well as 2 live CDs (gnome and KDE). In all cases, I get a message saying that the HD which contains FC11 needs to be reinitialized.
My most recent attempt was to upgrade using the preinstall. Upon reboot, Grub still shows the old (v11) and I can boot that with no problem. If I choose the upgrade option, it fails!
Failure message: Error processing drive /dev/sdc
Hitachi HDT 72101 (1TB)
The device may have to be reinitialized
device details: pci-0000:00:1f.2-scsi-1:0:1:0
The drive (sdc) contains several other flavors of Linux and they all run fine. FC11 also runs from that drive with no problem.
View 3 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
Mar 12, 2009
As I have no blank cds handy right now, I had to go the way descirbed here:URL...But when I seect my partition and / (no sub dirs, an empty ext3 formated 6.8GB partition, exclusivly for that usage) it tells me there ws no installation media found and the search path got automagically adjusted to /imges/image.img.And ideas howto fix that? Or how to install fedora from harddisk (without big fuss)?
View 2 Replies
View Related
Nov 29, 2009
I booted from fedora 12 cd, My problem is the install does not recognize my ide disk.
lspci -> ide interface vt82c586a
fdisk -l /dev/sda1 swap -approx 2g
/dev/sda2 linux 20 g
/dev/sda3 linux 54 g
lshal -> pata_via
I tested the disk with seagate diag it reports no errors. I used Partion manager and created three partions & formatted them. Other distros see the disk , I am trying crunch bang it installed with no fuss. I have googled & looked in known issues pages.
View 5 Replies
View Related
Jul 11, 2010
I downloaded Fedora-13-i686-Live-KDE.iso. Is there any way to install it from hard disk?
View 2 Replies
View Related
Feb 15, 2011
Is it possible to install the fedora 14 live to the hard disk and how?
View 7 Replies
View Related
Apr 9, 2011
I am installing a number of boxes with RHEL 6, using a kickstart file I made and put on a boot disk.I am having trouble, however, when using this disk. The boot loader recognizes my kickstart file, but when it prompts me that it can't find the RHEL distro on my disk, and that I need to insert the DVD that contains the distro, I cannot eject the CD. Button pushy, no ejecty. I tried a paper clip to open the drive, but even after inserting the distro disk this way, it doesn't see it. It's like anaconda is wrapped around the mount of the boot disk and won't let go.
There's nothing special I need to have in the kickstart file for this to work right? I have thought about putting an eject statement in the post section, but that isn't even used until the OS is installed is it? I can get around this by creating a distro DVD with my kickstart file, but I'd rather not do that, and use the kickstart/boot disk functionality as intended.
View 2 Replies
View Related
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Feb 8, 2009
Ive also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.
How do i find out if my machine is x32 x64 x86?
Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.
I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?
View 5 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Nov 24, 2009
Was using preupgrade from FC11x64 to 12x64. Preupgrade caused alot of problems like /boot not enough diskspace. After some searching found the steps and preupgrade proceed happily but after reboot got kernel panic grrr.
Took 3 days to find another machine to download and burn the FC12x64 disk. So I booted via the FC12x64 disk and selected the 1st option to install/upgrade. I thought it is upgrade and so choose replace my existing linux system however it wiped out everything on the disk. I have some important data in my home directory. I think it is in LVM, not a partition like /dev/sda1. How can I recover them? Was using stock settings.
View 3 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Jul 8, 2010
I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?
View 3 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Jan 22, 2011
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
View 6 Replies
View Related
Mar 21, 2011
I have a netbook I'm not using and which I transformed into a server with Apache, Tomcat6, Netatalk, Webmin, BIND9 and Tor.
Problem is, the disks never stop spinning because all of the programs write a few kb at least every few seconds to disk, even when nobody is connected to it.
My question is: Is there a way to have the computer boot from disk like normal (maybe even a squashfs), keep ALL CHANGES to ram and then save to disk when either the ram is full (unlikely because the server is rebooted every few days) or at shutdown?
I thought about a mixture of ramfs and unionfs but I'm not good enough yet...
View 4 Replies
View Related
Aug 6, 2009
I need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
View 7 Replies
View Related
Jul 9, 2010
I burned a Fedora ISO onto a CD and I love it. Now, I want to add it as a dual-boot to my hard disk. I divided Drive C into two (formatted) partitions one labeled Linux.During an attemped installation, I was able to find (thru "edit") the partition called "Linux." But one of the next questions threw me: it asked for a "mount point."I have no idea what that means (and yes I have readthe guide onthis site).
ACTUALLY... what I need to do is simply install into a partition I already set up.I don't find an option for that within the Fedora installation menu.I have 20 years of experience with Windows and try to keep up with everything, but Linux is totally new to me, so I don't understand the terminology.I also have been trying to find how to create a dual-boot situation from the hard disk, where XP is still my default (for now, at least).
View 12 Replies
View Related
Feb 17, 2010
I have been running Ubuntu 9.10 and Win XP Professional as a dual boot system, with each OS on its own HDD, smoothly and seamlessly since the release of 9.10. Yesterday one of my kids got a video file from a friend and it had a virus along with it. Long story short, in the process of trying to repair it Windows shuddered it last agonizing breath.
Now I have to re-install Windows because some of the programs the schools make them use require Windows. How do I go about doing this without damaging my Ubuntu installation? Will re-installing on a second drive affect GRUB?
View 9 Replies
View Related
Aug 14, 2009
I'm a subscriber of a Linux magazine who sends me 2 dvds of Linux distros each month. I wanna try some of those just for some time pass. The issue is that out of 52 GB partition on which Fedora 11 is installed, 42 GB is free. I want to have around 10 GB space from that 42 GB so that I can install CentOS 5.3. how shall I partition my disk?
View 7 Replies
View Related
