Ubuntu Installation :: Getting Error On Rebooting - Disk Drive Not Ready / Not Yet Present
Jan 29, 2011
I am trying to install 10.10 from a Live CD over my 9.04 (it would not do the upgrade automatically due to apparently lack of disk space.) at the end of the my best guess at the process (alas, Linux is pretty much a plug and pray operation for me.), on rebooting, I get the message: "the disk drive for / is not ready yet or not yet present" I must have messed up at the Allocate Drive SPace / Edit Partition step. I have three existing partitions:
7Gb for OS previously 9.04
35GB for data (which I clearly don't want to mess with)
a a bit for Swap.
So, I have clicked on the 7GB partition /dev/sda1 and have another window, Edit Partition, which is asking me: New partition size (I would just leave it at 7007) Use As (I presume I can leave it as EXT4?) Format the Partition (NO unchecked?)and Mount Point? Now here is where I don't have a clue. The pull down options are:
/, /home, /boot, /tmp, /usr, /var, etc.
not knowing any better, my first time through I just picked "/" and that is what got me to the message "the disk drive for / is not ready yet or not yet present" So what should I be specifying at this point?
View 9 Replies
ADVERTISEMENT
May 6, 2011
I've tried to use that thread to help but to no avail, i tried to use this:
[URL]
BUT I CAN'T OPEN A TERMINAL!!! as i am at a point where the screen says: Continue to wait, press S to skip or M for manual recovery. so if i run this command : gksudo gedit /etc/fstab my computer whines about there being no way to show this on the screen, I have tried this:
Use a non-graphical editor, like emacs or vi. Try Ctl+Alt+F3 -- you should get a login prompt. Login to an account with admin privileges (like, the first account you created, for example), and then type 'sudo vi /etc/fstab'; that will open /etc/fstab in the vi editor. Make your changes, save them, exit the editor, reboot... but if you're not used to working with a non-graphics-based editor, you'll have a bit of research to do. It's not hard, though, just tedious.however i have not managed to make it work.
View 9 Replies
View Related
Jun 11, 2010
I tried to upgrade to the newest ubuntu version (10.04 I think). Now I can't even boot my computer. After the initial "boot" stuff, the ubuntu screen comes on and then locks up in the process. I get the message "The disk drive for / is not ready yet or not present. Continue to wait; or press s to skip mounting or M for manual recovery."I've tried "waiting" overnight to no avail. I tried the "S" command to skip and got the message "[141.233783] Adding 1502036k Swap on /dev/sdb5. Priority-1 extents:1 across:1502036k"
I think the manual recovery is what I need to do. When I type the "M" for manual recovery I get a maintenance shell with the last line being.Can anyone please give me some commands to fix this problem? I have an OLD ubuntu boot disk. How can I get my computer to boot from it? I tried hitting "esc" while booting up to no avail. I also tried hitting F1 while booting up. I think that used to allow me to boot from the CD drive...but doesn't work now.
View 9 Replies
View Related
May 3, 2011
I upgraded my computer from Ubuntu 10.10 to 11.04 and now the OS doesn't boot correctly. I keep getting the same error msg after selecting Ubuntu from the grub: 'The disk drive for / is not ready yet or not present.' Underneath that line is the other msg: 'Continue to wait; press S to skip or M for manual recovery.'
I tried them both and if i press S then it gives another err msg: 'The disk drive for /tmp is not ready or not present' ; 'Continue to wait; or press S to skip or M for manual recovery' now if i press S then it shows a black screen with this msg:
Code:
mountall: Plymouth command failed
mountall: Disconnected from Plymouth
How do i recover my system now... I don't want to reinstall the whole of ubuntu 11.04 but i just want the old system back or Ubuntu 11.04 back in working order. I f i continue to wait nothing happens except the screen goes black. I know theres a way through the command line but how?
View 9 Replies
View Related
Jan 25, 2011
During the boot, the following message appears:The disk drive for /media/sdb1 is not ready yet or not present Continue to wait, press S to skip or M for manual recovery. This started to appear after I use the "pysdm" application.
View 4 Replies
View Related
May 20, 2011
I was upgrading to Ubuntu 11.04 and the laptop turned off.Once I rebooted, I got this Message :Code:The disk driver for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery.My laptop Model: Toshiba Satellite A200.
View 3 Replies
View Related
Oct 15, 2010
On rebooting or initial start up intermittent problem:"The disk drive for /home is ready yet or not present." It seems to happen on a cold startup and if a change is made in init/default file. (addition of the numlockx package modifcation.) So far a second or third restart will find the directory and complete the start-up.
On a 120 gig hard drive I have these partitions:
4 gig swap
25 gig /
90+ gig (the remaining space) /home
View 1 Replies
View Related
Jun 5, 2011
Due to complications, the laptop running Ubuntu had a hard reset during the 11.04 update. Now when I try to turn on the machine, I'm met with: "The disc drive for / is not ready yet or not present Continue to wait; or Press S to skip mounting or M for manual recovery" Anyone with a similar experience or the technical knowledge able to help with this?
View 1 Replies
View Related
Oct 15, 2010
On a cold start-up or after some package installations on re-start I get this message:
"The disk drive for /home is not ready yet or not present".
My disk partitions are:
Swap - 4 gig
/ - 25 gig
/home - remainder of 120 gig drive. about 96 gig
Last error: Installed the numlockx package and made the modification to .../init/Default.
Error on Cold start this AM.
View 2 Replies
View Related
Sep 25, 2009
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies
View Related
Jan 30, 2011
I've been seeing issues with this for the last few months when getting kernel updates. Never on every reboot, but this last time has been somewhat stubborn. Usually I can go back to the previous kernel, boot, reboot and I'm good. But not this time.My fstab:
Code:
# /etc/fstab: static file system information.
#
[code]....
View 3 Replies
View Related
Jan 26, 2011
I have a very strange problem. My computer is unable to boot from any hard disk but is able to boot from any CD or DVD. I have double-checked the BIOS settings and I am unable to figure out why is this happening. I have noticed that the Windows installer boots from the CD only if one presses a key when the message "Pressany key to boot from CD..." is displayed on the screen, otherwise it boots from the first hard disk.I have a triple boot system with Windows 7 (64-bit), Ubuntu 10.10 (64-bit), and Fedora 14 (64-bit). I have a dedicated GRUB2 partion on one of my disks. What I want is a boot-loader (any would do) on a CD/DVD/USB drive to chain load the GRUB2 present on my hard disk, without a delay, that is, without showing any message, menu, warning, etc. So, is there a way to do that?
View 6 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Jul 19, 2010
I have an annoying issue when loading Ubuntu it gives a message sdc1 and sdb1 being not ready. I have to press S to skip the two messages and continue loading.
The problem is that sdc1 is my DVD drive and sdb1 is my USB drive, so naturally they are not always present.. Its really annoying, is there anyway I fix this so it stops doing this every time I reboot.
Also I think its connected but if I do boot without these present, when i do plug for instance my usb drive in once loaded, it will not mount, I have to reboot with it plugged in.
View 9 Replies
View Related
Dec 8, 2010
I shut down my Ubuntu 10.04 (recently upgraded from 9.04 to 9.10 to 10.04) and moved it to another location with a different monitor, keyboard, mouse. When I booted, a screen came up stating:
Quote: The disk drive for /mnt/foobar is not ready yet or not present. Continue to wait; or press S to skip mounting or M for manual recovery
View 14 Replies
View Related
Jul 27, 2009
I installed successfully an updated Centos 5.3.However I'm receiving the following error in the terminal and I just wonder if this is a configuration issue from my side.This is the error I'm reeiving hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }hda: drive_cmd: error=0x4 { AbortedCommand }ide: failed opcode was: 0xecPlease
View 3 Replies
View Related
Oct 11, 2010
At the Ubuntu.ork front page, it promises:
Quote:
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
DeviceHarddisk3DR3
[Cancel] [Try Again] [Continue]
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
View 1 Replies
View Related
Aug 26, 2010
I tried using the Windows installer, after not having success burning the ISO to cd, and I received another error message. "There is no disk in the drive. Please insert a disk into drive. DeviceHarddisk3DR3"
View 9 Replies
View Related
Feb 7, 2010
1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
View 2 Replies
View Related
May 8, 2011
I have installed UBUNTU inside my Windows XP. But the Windows is now corrupt and i want to format the windows drive. Is there any way that i can format the drive in which windows is present without effecting UBUNTU.Note:- Windows and UBUNTU are on different drives.
View 1 Replies
View Related
Jun 2, 2011
I have downloaded the latest iso from the Fedora site (15 32-bit). I am using a netbook and so I have used the tool suggested on the site to copy the iso to my usb drive. Before this I formatted it to fat32 in Windows and then used the tool. When I rebooted with my USB drive, all that shows is a blinking _. I tried repeating the process again but the same happened.
View 1 Replies
View Related
Jan 24, 2010
When he rebooted his Grub gave the error: Grub error 22. He doesn't have internet right now. Know of any fixes? He's booted into a live cd.
View 9 Replies
View Related
Sep 2, 2010
I saw 2 users asking the same question, but no one has answered that post...
I am posting this because it is also happening to me.
I've installed (through Wubi) Ubuntu 10.04, after rebooting, I've got this error, waiting a couple seconds, Ubuntu started normally. This message now repeats whenever I start Ubuntu.
Error: unknown command, keystatus
I always get this message when I boot to Ubuntu. How can I get rid of this message and fix this issue.
View 4 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Mar 15, 2011
I just attempted to install to a USB drive, and somehow in the process, GRUB overwrote my Windows 7 bootloader on the internal disk. My work laptop is now booting into a grub recovery whenever my USB key isn't present (with error: no such device and the uuid) - and hangs on a blinking cursor whenever the key is plugged in.I'm not familiar with what my options are for grub rescue, but ls shows (hd0) (hd0,msdos2) (hd0,msdos1) (fd0)
My laptop is encrypted, so I don't have much chance of recovery unless I can get back to the windows bootloader.
View 7 Replies
View Related
Mar 14, 2011
I have a music server running on Ubuntu10.04.
The mainboard is a Gigabyte GA-MA790FXT-UD5P [URL].
Problem #1: Approx. four out of five times my dvd-rw is not available to the system. If I wish to burn a cdrom, the computer has to be restarted three or four times before the dvd-rw is available. But then it always works without a flaw.
Problem #2: This morning after booting, the system started and displayed a message: "Disk sdf is not ready for mounting, press S to skip or M to fix the problem" I pressed M and edited /etc/fstab, then continued to start-up. Then I started Disk Utility. The harddisk sdf is clearly visible: it's a Samsung HD642JJ and according to three different Smart tests the disk is healthy. But the harddisk is completely absent in the rest of the system. The blkid command does not report sdf, and 'fdisk -l' does not print anything about sdf.
As far as I have been able to test the hardware is healthy. All connections are in good condition, there are no loose connectors. So after thinking about these problems I have a suspicion towards hald and/or the enumerator. I have attached the dmesg output.
View 7 Replies
View Related
May 1, 2010
I'm running RHEL5: 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:54 EDT 2009 i686 i686 i386 GNU/Linux
under VMWare Server 2.0.2. When I create a new disk for my Linux VM I want to be able to use it without rebooting.
I checked what was currently in use:
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: VMware, Model: VMware Virtual S Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 02
[Code]...
View 7 Replies
View Related
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Apr 13, 2010
I have a security cam watched by a computer with Motion. on that computer i use hdparm -S 240 /dev/hdb to stop the harddrive where the pictures go from running when not used (witch is usually 2 days in a row). Now when motion is detected, the first 3 or 4 pictures are saved, and then there is a pauze for about 5 sec. before the next picture. This has to do with the hard-disk spinning up (I tried without), but I don't understand why not more pictures are held in memory until the disk is ready. how to solve this without having the disk running all days?, or what i should start reading
motion (version 3.2.9)
Debian lenny
Kernel 2.6.26-2-686
hdparm v8.9
PII with 384mb ram
[code]...
View 6 Replies
View Related
Nov 15, 2010
why I get this message during startup? I have to chose efore I can start up my system."The disk drive for /data is not ready yet or not presentContinue to wait; or Press S to skip mounting or M for manual recovery"Once upon a time I had a partition with that label, but I've since deleted it and resized my system partition to use that space. Why does my system keep looking for this drive?
View 7 Replies
View Related
