Fedora Installation :: Error 21: Selected Disk Does Not Exist
May 25, 2011
I did a fresh install of F15, and I can not get it to boot
Quote:
Booting Fedora (2.6.38.6-27.fc15.x86_64)
root (hda,4)
Error 21: Selected disk does not exist
Press any key ton continue ...
The contents of my fstab
Quote:
UUID=9fc649bd-ea40-44ab-88f6-29afe4f26576 / ext3 defaults 1 1
UUID=2437a8af-311a-4caf-99b3-1f137df69d43 /home ext3 defaults 1 2
UUID=a6f67606-ecb6-47c4-8913-f101fc6a097e swap swap defaults 0 0
[code]....
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
View 5 Replies
ADVERTISEMENT
Mar 7, 2011
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
View 6 Replies
View Related
Nov 19, 2010
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
View 4 Replies
View Related
Nov 17, 2010
Currently I'm running 3 operating systems on my machine; Windows XP, Windows 7 and Fedora 14. I've installed them in the following order: XP -> Win7 -> Fedora14, with the idea that this would work fine regarding operating system selection at boot time.
But unfortunately, I just installed Fedora, and now I'm unable to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error: Code: Error 21: selected disk does not exist To provide as much info as possible, here is a boot info script log:
[Code]...
View 3 Replies
View Related
Oct 10, 2009
I am having problems with grub. Originally I was having trouble installing Service Pack 2 for vista and I made the fool's mistake of changing the active partition in disk management from the boot partition to the windows partition. This blew up grub. After restarting I was dumped at the grub terminal i.e.
grub>
so I thought okay, I will just reinstall grub. I ran setup (hdx,y) but now when I restart first of all the splash screen is different, rather then the blue background with the big words in white, fedora 11, it's black and I get a error saying unable to read any images. I can see the different OS' I have on the grub screen but attempting to load any of them gives me
error 17 cannot mount selected partition.
I am currently running the Fedora 11 xfce spin live cd. From the terminal here, here is some information. sda3 is my fedora 11 partition I am not sure maybe it is because of ext4 but I can't seem to mount it using mount /dev/sda3 /mnt/xxxxx.
[root@localhost grub]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x72edceee
Device Boot Start End Blocks Id System
[Code].....
View 11 Replies
View Related
Jun 4, 2010
I dualboot Ubuntu and Fedora in one hard drive. Below are the scenario.
First, installed Ubuntu 10.4 on the entire disk (40GiB of size). Then, shrink the Ubuntu installation to equal size to free up space for fedora.
Second, installed Fedora 13 using the option "Use free space on selected drives and create default layout". After the successful installation fdisk -l shows,
Code:
# fdisk -l
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
View 2 Replies
View Related
Feb 12, 2009
I've downloaded Ubuntu 8.10 and I have installed it within ms windows. My first problem was when I went to boot Ubuntu and the graphics weren't right so I rebooted it with a different graphic configuration and it installed successfully. When I went to boot Ubuntu a second time to actually use it I got the following error:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
View 2 Replies
View Related
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
View Related
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Jan 23, 2010
Fresh install of 9.10. Update all. The update froze at the very end: configuring grub-pc. I let it run like that all night before settling for a reboot while the update manager was still running. (The update also raised the kernel version.) After reboot, I tried the newer kernel [2.6.31-17-generic] at the grub menu and got this error:
Quote:
udevadm trigger is not permitted while udev is unconfigured.
udevadm settle is not permitted while udev is unconfigured.
svgalib: Cannot open /dev/mem.[code].....
And, cat /proc/modules gives me a long list of modules (too much to retype for now).So my hard drive is there. maybe some errors on the / home partition [sda6] and I can get to the root directory.
FYI: MS-win XP still boots fine from grub.
View 1 Replies
View Related
Oct 13, 2010
Just tried installing Ubuntu 10.10 from a USB device on my Windows 7 machine but something goes wrong. Far into the installation the computer restarts, asks me which operating system I want to start (it had already done this once before) and I choose Ubuntu. Then I get three alternatives:
Ubuntu, Linux 2.6.35-22-generic
Ubuntu, Linux 2.6.35-22-generic (recovery mode)
Windows 7 (loader) (on /dev/sdb1)
I pick the top choice, and get the following message:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell.
If I start recovery-mode i get the same message. There's some text above the message that reads "new low speed USB device using ohci_hcd and address"... Could there be a problem with the usb-drive? If I remove the USB drive I get the message: Gave up waiting for root device.
View 2 Replies
View Related
Jul 22, 2010
I 've reinstalled XP partition on my ubuntu system 8.10 ,After that i reinstalled grub using live CD ubuntu 9.04
With the following commands:
but when i restarted the system i got the grub menu .. but when i select ubuntu i got the following error message: " error 17 .. can not mount selected partition "
View 1 Replies
View Related
May 10, 2010
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
View 7 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked. So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbook so I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"
Things I already tried: Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation. *I tried removing the usb and setting the HDD back to first boot in the bios and then changing the menu.lst accordingly, still I get error 17. Below is the information just after boot with the usb still plugged in and set as first boot in bios.
[Code]...
View 3 Replies
View Related
Oct 16, 2010
Basically, today I installed Ubuntu on my Toshiba NB200 to dual boot with XP. The installation went okay (I think) but after, when I rebooted, and selected Ubuntu from the possible selections, I got this message:Quote:Gave up waiting for root device.Common problems:
-Boot args (cat /proc/cmdline)
-check rootdelay= (did the system wait long enough?)
-check root= (did the system wait for the right device?)
[code]...
View 3 Replies
View Related
Mar 29, 2009
I just downloaded the Fedora 10 cd yesterday and decided to install it. I had a partition for Fedora on my system before but I'm not really sure what I did to it. It wasn't booting and it has been so long since I messed with it I just decided to reinstall with the latest (I think I was running F9 previously). So I pop in the live CD, run the install, and then reboot into Ubuntu. I modified my menu.lst to include the new vmlinuz and initrd versions, as well as the new UUID of the partition. Now when I reboot and choose Fedora from grub's menu I get this error:
Quote:
Error 18: Selected cylinder exceeds maximum supported by BIOS
I found this wiki which does a pretty good job describing the problem:
[URL]
However, I'm still unable to get this to work. According to many different sites out there this problem shouldn't exist on newer computers. Well, I just recently put a new motherboard into this box -- it's this one:
[URL]
According to their BIOS page the first release of this was late November 2008. Yes they have had 2 updates since then but it looks like those only serve to support AM3 CPUs (which I don't have) or update some audio playback issues. I seriously doubt I need to update my BIOS to get this to work.
Here's my fdisk:
Code:
$ sudo fdisk -l
Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I can get Slackware 12.1 to boot (though it kernel panics during startup...not sure what I did to make it angry), but grub immediately fails when I attempt to boot Fedora. Here's the entry from menu.lst:
Quote:
titleFedora 10 (on /dev/sdb1)
root(hd1,0)
kernel/boot/vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=178bc9f9-76ba-48aa-a588-de978cc1eee1 rhgb quiet
[code]...
I have verified that the vmlinuz and initrd are both correct. I put the UUID in there after running vol_id so I'm sure the entry is solid. I have tried making it "root=/dev/sdb1" which failed with the same error, and I even tried copying the fc10 vmlinuz and initrd files over to my Ubuntu partition (which controls grub) but for some odd reason the cp command takes a really long time and then I eventually get this weird error for initrd:
Quote:
$ sudo cp /media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img .
cp: reading `/media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img': Input/output error
I got the same error with the dd command too. So I was going to just try and copy the files to my sdb3 partition and then modify the menu.lst entry appropriately but that doesn't seem to be plausible at this point.
I have a motherboard that was just released about 4 months ago, an Athlon X2 6000+ CPU, and 4gigs of RAM. The drives are both SATA 300 drives...it's not like this is some old Pentium Pro and the BIOS just doesn't support large drives...this is a brand new system with a very recent BIOS version.
I have successfully quadruple booted all of these in the past, but that may have been prior to the new motherboard. So that makes me think it could be something related to the motherboard but the thing is so much newer than what I previously had, certainly that can't be the problem...can it? Then I remember that Slackware boots, so if it's truly something about how the BIOS can't access some file beyond a particular section of the disk, then it doesn't make any sense that it can book slackware. Fedora is the first partition, Slackware is the last and is like 200+ GB into the disk.
View 8 Replies
View Related
Dec 22, 2009
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
View 2 Replies
View Related
Mar 2, 2011
I was going about tweaking it and preparing it to my needs, While installing through yum I dont have much other than the fact that I have to search for the packages. But when I open "Add/remove software" of Fedora. I am greeted with " No space left on the disk" and when I seek for more details it says " Disk Error :[errno 5] Input/output error"I did some research and I saw that it usually occurs during installation, but here I have successfully installed it.Can someone help me with it? Later on I even had notification of the same warning. And mind you I got loads of free space.
View 1 Replies
View Related
Apr 19, 2011
I got the "The file '/var/log/syslog' does not exist." message when I tried to run KSystemLog as well as "The file '/var/log/auth.log' does not exist." when I tried to view the authentication log. There is no icon beside the items "Krfb," "KSystemLog," and"Nepomuk Backup" in the "System Tools" menu of Gnome.
View 9 Replies
View Related
Dec 27, 2009
I'm trying to install F12 from the install DVD that I torrented but it's giving me a disk error when I try to install. The DVD loads but when I go to install, it crashes when loading initrd.img, saying:
isolinux: Disk error 10, AX = 4209, drive EF
Boot failed: press a key to retry...
The DVD iso does pass the SHA256 hash test, so that doesn't seem to be the problem. I'm using Roxio Easy Media Creator 9 to write the DVDs, which it seems to do without any problems. The only thing I haven't ruled out is Roxio - is this the problem or is there something I'm missing? If it is the problem, any suggestions for a better free Windows DVD burning program I could use?
View 1 Replies
View Related
Apr 21, 2010
I'm trying to install fedora with the live cd into my windows machine. When i get to the select drive nothing can be selected.
View 1 Replies
View Related
May 21, 2009
I am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
View 5 Replies
View Related
Feb 7, 2010
1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
View 2 Replies
View Related
Nov 17, 2010
I'm trying to upgrade, but have this issue: usually I download the DVD iso, run checksum, burn it, test the disk, and when found ok, I run the upgrade. Now, however, I keep getting "disk not ok" at 95% of the disk test. I have downloaded and verified the iso twice, used 2 DVD's, 2 different DVD-drives, 2 different computers and keep getting this error at 95%.
View 2 Replies
View Related
Jun 5, 2011
1)NOT USING MMCONFIG
2)insmod Error inserting `/lib/raid456.ko` -1 File Exist
Dell PowerEdge T110 with 4sata Controllers with Centos2.6.18-238.9.1.el5xen installed .
Code:
/boot on /dev/md0
/ on /dev/md1 Regards
View 7 Replies
View Related
Jul 7, 2009
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies
View Related
Aug 25, 2010
I'm a Linux newbie and are trying to install F13 from bootable USB onto the HD of a DELL mini netbook. I've followed the install wizard's defaults including the "Use All Space option." The install errors out at about 20% of progress during the "Copying live image to hard drive" process. The error dialog is as followed:"There was an error installing the live image to your hard drive. This could be due to bad media. Please verify your installation media..." and it comes with options to Exit installer or Retry. I have since retried and restarted several times and still came to the same error. FYI, I've initially attempted to install F13 to the HD over an existing Windows XP.
View 2 Replies
View Related
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Feb 10, 2011
my laptop doesnt have any cdrom drive and all usbs are broken so wubi is my only option. oh and i use win 7 starter. i tried to install netbook edition to my laptop but i always get error. i can install with only "acpi workarounds". i dont even understand what it is the error and why i'm getting this error.
error is
Quote:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda2 does not exist. Dropping to a shell!
BusyBox v.1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands
(initramfs)
View 4 Replies
View Related
