Fedora Installation :: No Ntfs Disk Drive Icons?
Jan 25, 2009now i have the kde session, now but the ntfs disk drive icons are gone
View 1 Repliesnow i have the kde session, now but the ntfs disk drive icons are gone
View 1 RepliesBackground for the problem:
A. I have partitioned my WinXP LTop into:
--- WinXP NTFS partition
--- a vfat partition (mounted onto /fat32)
--- Installed F10 on ext3 virtual partition
B. I do not want install grub-loader in the Master Boot Record (that would loose my WinXP boot-loader for ever)
C. I have installed grub boot loader in the First Boot Sector
D. Now I have to boot using Rescue Mode, do:
1. dd if=/dev/sda2 of=/fat32/linux.bin bs=512 count=1
2. mount -t ntfs /dev/sda1 /ntfs
3. cp /fat32/linux.bin /ntfs
4. modify /ntfs/c/boot.ini and introduce the statement 'c:linux.bin="Linux"'
Problem: Im not able to do step D.2 above.
Symptom:
** after booting linux using the Rescue Mode: sh-3.2# chroot /mnt/sysimage sh-3.2# uname -r 2.6.27.5-117.fc10.i586 sh-3.2# mount -f ntfs /dev/sda1 /ntfs FATAL: Could not load /lib/modules/2.6.27.5-117.fc10.i586/modules.dep: No such file or directory ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
sh-3.2#
Observations:
* The rescue mode boots into i586 based kernel (I dont know what is the actual difference between i586 and i686 - will really appreciate if anyone can educate me about it). * The installation is only a i686 image and consequently there is *only* '/lib/modules/2.6.27.5-117.fc10.i686' dir and *no* other dir. There is no dir as xxxx.fc10.i586.
I recently upgraded my computer and tried using same hard-drive in new one. Fedora 11 booted and allowed me to log-in. But system is un-usable as there are no Icons on desktop and no panels. While I know that initial installation is based on hardware profile of previous computer, is there any work-around to make it work without having to install fresh. Also, If I choose option "replace previous Linus version" from LiveCD, will that preserve my personal data and settings?
View 2 Replies View RelatedJust installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies View Related1. While installing Fedora 12 i got this error "Isolinux disk error 20; AX=4280, drive EF". I run Ubuntu 9.10 on same system but now getting Error on installing Fedora 12 using a writeable CD to install that. A friend of mine install fedora from the same CD. I am using Pentium 4 2.40 GHz, 512MB Ram, Nvidia G-Force MX-440 SE. and a complete Partition of approx 10GB.In frist attempt CD was not able to boot, but after 3-4 trys CD was booted for couple of times and now it was not booting again. In that 2 trys, i got the same error as mentioned above.2. Before installing this I install ubuntu and it was running fine, but a little problem with that. Whenever I boot my system all things remain same but monitor settings went on 800*640. I usually set them to 1024*768 (Maximum my card can suppot).
View 2 Replies View RelatedHow can I access an NTFS formatted disk to read the raw data?I have done this with the FAT file system. I followed the FATspecifications,d I can read the contents of each disk sector.
View 11 Replies View RelatedI downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View RelatedI have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--
Anyone having an idea how I can fix this?
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View RelatedI really need some help here. I was installing Ubuntu 11.04 supposedly on a Desktop but I had my external hard disk connected via USB. This external hard disk had two NTFS partitions with lots of important personal and my works.
I accidentally installed Ubuntu upon it and I believe I had created new Linux partition for the Ubuntu installation. Is there any way to undo everything?
Can format a drive to ntfs in fedora 10? Do i use fdisk then use format like in dos?
drive info
[root@localhost ~]# fdisk -l
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/sda doesn't contain a valid partition table
I know it is not advisable to write to a NTFS drive with linux. Though I'm using Knoppix and Fedora 11, is it safe to access my video and music files from linux, while I am working under them or would it be best to use external media to get them.
View 2 Replies View RelatedI am kind of new to linux. How can I make Fedora automatically mount my NTFS partition on boot?
View 7 Replies View RelatedIt's been about three days since I've made Ubuntu my OS and I'm quite surprised to see, when I tried it first via wubi, that it actually reads NTFS partitions.It made backing up easy for me though now is it still alright that I still keep them NTFS or should I now start converting them to ext4? Except for my external hard drive.and what's the difference with ext3 and ext4? I was shown these options when I tried formatting my hard drive.
My other hard drive has two partitions which was done when I installed windows a few years back..If I would to reformat should I combine these partitions into one and make new partitions via that?
I used to have all my mp3s, photos, etc. on a Seagate "Freeagent" removable USB drive and share it over a Windows network. We've gone all Linux in the house and I tried to export the same drive over NFS (got the NTFS support installed, ntfs-3g) but get this error:
Code:
Starting NFS services: exportfs: Warning: /media/FreeAgent Drive does not support NFS export.
I need to recover deleted files from a NTFS drive. The OS has been re-installed by accident. any tools that will allow me to see if there is anything that can be recovered.
View 5 Replies View RelatedI have an ntfs drive that I use to share files between Fedora and Windows 7 dual boot machine, how can I mount the drive w/o having to give the root password?
View 9 Replies View Relatedrunning Fedora 12 (worked fine when I used ubuntu) [URL] gamecenter... firefox will not display the team icons or the drive chart...what am i missing? Chrome does it perfectly.
View 4 Replies View RelatedI'm actually not a Linux newbie, but I'm DEFINITELY no expert either... I'm trying to copy all my data(approx 50 GB) from a usb drive(western digital 250GB) with ntfs partition in one go... The problem is that it only fails for big transfers... works fine for smaller transfers like 1Gigs or less... I have just one internal hdd partitioned into two ext3 partitions.. so I have sda1(Primary.. mount pt /), sda2(swap) and sda3(mount pt /piyush)... The usb drive comes up as sdb(sdb1).. just has one ntfs partition... I've also installed the ntf-3g drivers.... but doesn't seem to work... I've also noticed that when the machine hangs and I try to shut down, it fails and I get a message again again... (sdb1- no sense detected) or something like this... don't remember the exact message... will post the exact one if no one is able to figure out what's wrong...
View 4 Replies View RelatedI am an Ubuntu refugee. Allow me to explain what happened. I am dual booting with Windows 7 and F15 x64.
(1) I wanted to created a shortcut of my "Documents" folder in my Windows in Nautilus
(2) I opened the Windows drive by double clicking the drive under Devices, and navigated to my "Documents" folder (F15 already has ntfs-3g installed so no hassles there)
(3) I then dragged the folder to the sidebar to place it under the Trash icon--but for some reason, it would not let me do this, and accidentally got placed in the Trash bin.
(4) problem is I can't see this folder in the Trash bin (it is not even hidden)
(5) To check if the Trash bin actually captures items when we move files/folders to Trash, I tried sending a folder from my Home directory to Trash, and the folder appears in the Trash; it can even be restored to Home.
(6) Only files/folders from the NTFS formatted Windows drive do not appear in the Trash folder if sent there.
(7) I have Google searched this problem, but to no avail.
(8) I even thought that because the drive is not mounted 'officially' I would mount it using command line:
Code:
(9) But still I can't see the folders in the Trash
(10) Interestingly, when I try to unmount the Windows drive 'formally' then I get a message if I want to "empty the Trash"--I obviously chose not to--so I know there is my Windows Documents folder in there somehere.
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
View 2 Replies View RelatedI have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies View RelatedI'm installing RHEL 4.x to a hard disk that already has windows 7 enterprise installed. I would like to dual-boot both the OSes. The hard drive size is about 220 GB (of which windows 7 occupies about 50 GB).Now, is there any free and friendly tool that I can download to partition this drive ?RHEL comes with a text mode (disk druid) to partition and I could not figure out how to resize the existing windows partition. So, I'm assuming that I need to abort the linux install now and proceed to boot from another CD that contains a good partitioning tool and then later resume boot from RHEL install disk.Also, what should my partitions look like ? What size should they be ? The system is a new LENOVO with 4 GB RAM on a i5 core processor.I know that I will need atleast 5 partitions. right ?1) /boot2) /3) /home4) swap5) /var
View 2 Replies View RelatedI've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
At the Ubuntu.ork front page, it promises:
Quote:
This Windows installer (Wubi) will help you to run Ubuntu within your current system.
What exactly is meant my this? Does this mean it is an easier way to install the dual boot with Windows? (I am using Windows-7 on a new PC.) Or does it mean it will install Ubuntu under Windows? I assumed it meant the latter.
In any case, I downloaded it - a mere 1024K, scanned it and ran it. I get a stubborn error box with the message:
Quote:
There is no disk in the drive. Please insert a disk into drive
DeviceHarddisk3DR3
[Cancel] [Try Again] [Continue]
And that box will not go away - no matter what I press, including the [X] button in the upper corner, the box reappears. I had to go into Process Explorer to kill pyrun.exe and its parent, pyl5E39.tmp.exe before the [Cancel] button would close it for good.
I could not find doc on this so I don't know what it really wants as a prerequisite to running wubi.
i was using vista in my laptop, recently installed ubuntu in another drive partition which is 69 GB. but during ubuntu installation i gave only 16GB to ubuntu from this drive. i guess the remaining 69 GB - 16 GB = 53 GB is unused space now.. now how can i allocate all 69GB in that drive to ubuntu ?
View 5 Replies View Relatedi hav ubuntu installed onto my hard disk..
now i want the same installation with all the packages to be replicated on a pen drive..
so that i can use ubuntu on other pcs with a bootable pen drive with all my packages installed.
i dont want to create an installation usb..
jus a usb which contains my full hard drive installation and can run on any system which supports bootable usb..
my filesystem size is 5.5gb and pen drive size is 8gb.
After many hours trying to install Ubuntu(netinstall-64bit) i can not find any solution to get it working. I set-up via KVM and virtual device. Installation gives me error "No disk drive detected" when trying to detect discs/hardware. Someone told me i have to load megasr-source_13.13.1021.2009-1_all.deb by virtual-usb. It should include drivers for the controller not delivered by ubuntu-setup. After that I got to next setup-step partitioning, but it only shows me an IPMI-device which is either the virtual usb or cd i suppose.
System is one week old and I got it with pre-installed debian64bit which is working fine. So i dont think its hardware causing this.
[Code]....