Ubuntu Installation :: 9.10 - Non-system Disk Or Disk Error With Manual Partitions
Apr 9, 2010
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
View 3 Replies
ADVERTISEMENT
Jan 22, 2011
After installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
View 6 Replies
View Related
Oct 17, 2010
I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies
View Related
Aug 1, 2010
I had done a new lucid install to a 1 TB RAID 1 array using the alternate CD a few weeks back. I messed up that system trying to some hardware working that lucid doesn't have drivers for yet, so I gave up on it and reinstalled to a single 80 GB disk that I now want to move over to the RAID array.
I moved all of the existing files on the array to a single folder, then copied all of the folders from the 80 GB disk over to the array with permissions and symlinks (minus the contents of /proc and /sys, which I created empty).
These are the commands I used:
Quote:
p -a -d -R -v -t /media/raid_array /b*
cp -a -d -R -v -t /media/raid_array /d*
cp -a -d -R -v -t /media/raid_array /e*
cp -a -d -R -v -t /media/raid_array /h*
[Code]....
I tried to change fstab to use the 689a... for root, but when I try to boot, it's still trying to open /dev/disk/by-uuid/412d...
So then I booted from the single disk again and chrooted into the array, then ran update-initramfs -u. I got 3 "grep: /proc/modules: No such file or directory" errors, and "cat: /proc/cmdline: No such file or directory"- so I created directory /proc/modules, created an empty file /proc/cmdline, and ran the initramfs update again. Then I tried to shut down, which hung (probably because I was doing all of this from a terminal window in Gnome), so I killed the power after a couple of minutes.
It's still trying to use /dev/disk/by-uuid/412d... to boot.
What am I missing? I assume I just have to change the UUID to mount as root, but I don't know how.
View 2 Replies
View Related
Jun 14, 2011
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies
View Related
Aug 9, 2010
I got a HP mini 5102 yesterday and decided that Win7 wasn't doing it for me so I would put ubuntu netbook remix (10.04) on it. Set up a usb stick with the installer (using universal usb creator) and booted from it.
I decided that I would do a full install of ubuntu as I have no need for windows on this machine, hence I left no partition for windows when doing the install. The install went fine but when the machine restarted I was faced with a black screen and the error message "Non-system disk error".
At first I thought that I had messed up the boot order and it was trying to do a network boot as I was getting "PXE-E61: Media Test Failure", so I changed the boot order and fixed that problem but am still getting the non-system disk error.
I figured that I would try and boot from the usb again and see if I could redo the install or just boot from it for the time being but when I tried that I got the non-system disk error again (though, this time if I hit any key when the error message is showing it quickly flashes "geom error" before going back to non-system disk).
View 1 Replies
View Related
Apr 23, 2010
how much disk space a non manual dual boot uses? I've always been guided by a person knowing much about linux when doing my dual boot (and been guided to do the partitions manualy), but this person is not there for the moment and I need to do a dual boot on my son's computer. Since he'll need his Windows computer mainly for games I wouldn't want Ubuntu to take 2/3 of his disk space (which is about 250 Gb I think, let's say 50 Gb would be perfect for the Ubuntu)
And I'm not sure how I could change this later, cause in my own computer I cannot find how to resize (I cannot unmount neither resize the partitions I have) I don't mean I need to do this on my computer but I mean I wouldn't want to try out anything if I'm not sure it be could restored in 1,2,3. And partitions is such a thing. If I remember correctly I've done dual boot by default (i mean without doing the partitions manualy) and it does about 50/50 ?
View 2 Replies
View Related
Feb 27, 2011
My system decided to crash on me, hard. It was humming along happily for about 2 months and now doesn't boot. If I boot from hard-disk, I get grub. Launching the first kernel choice hangs. I thought maybe the install was corrupt, so I booted from usb install disk. The usb hdd didn't boot; something about an error trying to access /dev/sda . Unplugging the internal disk and plugging in the usb install disk does result in the system booting. Plugging in the internal disk in a running system usb-booted system does not result in the system detecting the disk.
How do I know if the disk is physically broken? This seems unlikely since it does manage to launch grub consistently. Or is this still possible? How can I try to mount whatever is left? The usb install disk doesn't even list the /dev/sd*. Any pointers on how to reformat the drive if it's not being mounted?
View 1 Replies
View Related
Jun 17, 2010
I am a long time Windows user and attempting to install Ubuntu Netbook 10 on my Acer Aspire netbook.I followed the steps:1) Downloading the Ubuntu ISO to my netbook hard drive.2) Installed Ubuntu from the netbook HD to USB using USB universal installer (also using the universal installer to format the USB)3) Set bios to first read USB deviceI receive the following message during the boot "Invalid system disk. Replace the disk, and then press any key.I have retried this process several times.
View 2 Replies
View Related
Feb 19, 2011
I was trying to install Ubuntu desktop and laptop edition on a Sony Vaio netbook from a USB drive, but after I select the entire disk to be used and hit enter I get this message No root file system is defined. correct this from the partitioning menu. If I try to start windows I just get s black screen.
View 9 Replies
View Related
Dec 13, 2009
I've installed Linux quite a few times on many different computers and for some reason, I'm stumped.
I went to ubuntu.com and burned myself a boot-disk. Afterwards I went to my dad's original ME box and when I tried deleting the partition I got an error that said, "Could not change partitions, cause the disk could not be locked".
View 2 Replies
View Related
Feb 11, 2010
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
View 4 Replies
View Related
Mar 4, 2011
I am installing 10.10 on my PC. I have changed the hardware and the previous install was for a x64 I now have x32. I ran the live disk and have selected install. I am now on the partition page, (manual). I am happy with the concept of partitioning and which partition is which, but I can only change the linux partition. At the moment I have @60G NTFS, 1G swap and @18G Linux. I want to reduce linux partition to about 12G (which is fine I've done that) I now have free space. I want to increase the swap partition to 2G and the remainder to be added to the NTFS partition. However, I can't add any more disk space to the latter partitions. The Swap partition has the space bar available, but the increase is greyed out and on the NTFS partition, there is no option at all.
View 9 Replies
View Related
Nov 9, 2010
I'm trying to install Ubuntu 10.10 64-bit on my laptop HP pavilion 3046ee . When I reach the partition part , it doesn't detect the Windows 7 os , and doesn't detect any hard disk partitions ( it sees the whole hard disk as one unallocated partition ). I faced the same problem when I tried Ubuntu 10.04 LTS.
View 1 Replies
View Related
Jan 28, 2010
I am trying to install ubuntu 9.10 alongside windows on my laptop's harddrive. When I was going through the procedure it gave me the option of a guided partition of my harddrive... however there was an error. At this stage I unplugged my external harddrive because it's sometimess a bit dodgy and restarted the installation process. However everytime since that I have tried to install, it only gives me the option of erasing the entire disk or specifying the partitions manually
View 6 Replies
View Related
Nov 21, 2010
I tried to install ubuntu 10.10 today through livecd. but the partitions in my 60gb samsung harddisk are not detected. My entire harddisk is shown as unallocated free space. Also gparted is not detecting the partitions as well. I am currently not facing any problems with my partitions in windows xp. I tried the solution given here (to no avail): [URL]. I have had no such problems with previous versions of ubuntu.
View 9 Replies
View Related
Jan 8, 2011
I have reinstalled XP and conseqently messed up Grub and lost Ubuntu. I am trying to do a fresh install but the installer insists on trying to overwrite the whole disk. I downloaded the alternate instal ISO as this has got over this problem in the past but this also wanted to overwrite the whole disk. It recognises the Sata Raid array as being nfts (this is my main data disk) but it doesn't recognise the existing partitions on my main disk:
18G windows
18G Old Ubuntu
113G nfts data disk
View 8 Replies
View Related
Apr 11, 2011
Wanting to dual boot XP with UBUNTU. Live CD verified good.
ran df in terminal:
Ran sudo fdisk -lu in terminal:
Partition table entries are not in disk order
Originally I had two partitions for Windows xp of 100 gig each. I cleared / backed up the second partition and created two 50 gig partitions, splitting the second into two linux (using Gparted) partitions labelled root and swap.
Disk Utility sees this hdd as a RAID component. It is connected through a RAID controller.
The installer (in allocate drive space step) doesn't see them for some reason.
Hardware:
AMD Athlon 64+clawhammer processor
Asus A8N-SLI mobo
hdd as above
2 Gig RAM
DVD / CD Burner
View 5 Replies
View Related
Apr 29, 2011
Is it possible to install GRUB in the MBR of the only bootable disk in the system, but load configuration and images from another disk?Basically I want to install GRUB on /dev/sda, but menu and images will be under /dev/sdb2.Note: /dev/sdb is not bootable.
View 14 Replies
View Related
Oct 11, 2010
Can I delete the ext and swap partitions from disk management on windows 7 ? Because I want to install a fresh new copy of ubuntu 10.10 . I know it would affect windows 7 boot up.I can handle it by system restore Anyway can I do it or not ?
View 5 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Sep 25, 2009
I had Windows 7 RC installed and F10 on the same machine. HP 6730s Intel Dual Core. Everything was working fine and I don't remember doing anything special when installing Fedora 10. I decided to install F11 from DVD, installation went fine but after rebooting all I get is "non-system disk error or disk error. replace and strike any key when ready". I couldn't find any relevant post in this forum and googling I found that this could be a disk starting to fail but I don't thing this is the case here. I'm trying to reinstall just now, I chose to install grub at /dev/sda (default), should it be /dev/sda1 ?
View 7 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
May 25, 2010
I have a computer I recently uninstalled the operating system from and was wanting to use Linux Ubuntu. After burning the cd and trying to install it to the computer it gives me "Invalid System Disk, Replace then disk and press any key." I am unsure how to start this and I am not even sure if I have all the files, I need to install the Linux Ubuntu 10.04 operating system step by step.
View 4 Replies
View Related
Mar 21, 2011
I have a netbook I'm not using and which I transformed into a server with Apache, Tomcat6, Netatalk, Webmin, BIND9 and Tor.
Problem is, the disks never stop spinning because all of the programs write a few kb at least every few seconds to disk, even when nobody is connected to it.
My question is: Is there a way to have the computer boot from disk like normal (maybe even a squashfs), keep ALL CHANGES to ram and then save to disk when either the ram is full (unlikely because the server is rebooted every few days) or at shutdown?
I thought about a mixture of ramfs and unionfs but I'm not good enough yet...
View 4 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Mar 15, 2009
I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?
View 14 Replies
View Related
Apr 8, 2009
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies
View Related
Jul 14, 2010
I am trying to install Oracle ebs and it falls over with this message:-
Code:
File Space Check :
-- database node space checks --
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = /d01/oracle/VIS/db/tech_st/11.1.0
required = 9967.0
actual = 9898.0390625
[code]....
View 3 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
