Ubuntu Installation :: No Boot Up - Getting Grub Loading Error 2 Message?
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
ADVERTISEMENT
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Nov 20, 2010
I am trying to install Ubuntu 10.10 and i get this error message after a while of loading:
View 2 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Jan 8, 2010
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies
View Related
Jan 25, 2010
The follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies
View Related
Jan 30, 2010
I've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
View 9 Replies
View Related
Aug 1, 2011
I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)
When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?
Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).
View 2 Replies
View Related
Oct 23, 2010
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
View 1 Replies
View Related
Jan 6, 2010
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
View 3 Replies
View Related
Oct 2, 2010
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
View 4 Replies
View Related
Jan 13, 2010
I am trying to install Ubuntu on a nvidia board which, based on the forums I have perused, is a FAKERaid chipset. Originally I tried to install according to https://help.ubuntu.com/community/FakeRaidHowto to no avail. I gave up and am resorting to breaking down my raid setup (thus losing my Windows XP installation) and using Linux's software raid (which seems to be the recommended method) with the Alternate CD install.
I went in to the bios and completely disabled my board's RAID function. I then followed the instructions here: https://help.ubuntu.com/community/In...n/SoftwareRAID , except it popped up with a window advising me "one or more serial ATA RAID configurations have been found. Do you wish to activate these RAID devices?" which that page didn't mention. I believe I selected "Yes". Setting up the partitions I made (from beginning of disk to end of disk) a RAID1 200MB /boot partition, a RAID0 / partition (90GB?), free space not set up in RAID (approx 20GB for each SATA drive to later install Windows on [if that's even possible]) & then the SWAP partition 2GB at the end of one of the disks (is it OK that this one wasn't in RAID?).
The installation completed, as far as I can tell, without a hitch. Except also of note: my network card doesn't work in the installer (gives an error message about unable to configure dhcp) so i'm not connected to the internet. Then I restart and the following appears: grub loading: error: biosdisk read error. Followed by what appears to be the Ubuntu loading splash (just a small white shape in the middle of the screen), and then:
[Code]....
View 9 Replies
View Related
Mar 30, 2010
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies
View Related
May 7, 2011
A couple of months ago I bought a new Dell laptop with Windows 7 pre-installed. Rather than strip the hard drive and go with Ubuntu exclusively, I left W7 on and set up Ubuntu 10.04 as a dual boot installation. All was well for a month or more and now suddenly W7 won't boot. The Windows error message I get is The boot selection failed because a required device is inaccessible I've purged and reinstalled Grub2 several times with no luck. Also tried Windows fixmbr which allowed W7 to boot but made Ubuntu inaccessible. Below is the output of the boot_info_script.
[code]....
View 1 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Jun 25, 2010
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
View 1 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Mar 7, 2009
I have an Intel DG33TL MB, Intel Core 2 Quad Q9650, 8GB SuperTalent DDR2-800, and 4 Seagate 500GB hard disks. The disks are connected to a 3Ware 9650SE-4LPML and set for RAID0. I partitioned the drive in the following manner: 900GB for XP-Pro x64 (first install), 100 GB XP-Pro (installed second), and the remaining for FC10. After installing FC10 x64 using downloaded DVD .iso I am getting the following error on reboot:
Code:
Reading all physical volumes. This may take a while...
Volume group "VolGroup00" not found.
[code]....
View 1 Replies
View Related
Nov 8, 2010
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
View 1 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Jun 9, 2010
I have installed 11.2 from OpenSuse DVD on a clean partition. The problems I am having are: Updater Applet - it keeps trying to do the update and fails with the message: DBus error: Unable to get transaction id from packagekit. svn. I am trying to understand how to run svn client. I found installation instructions here. However, running the command zypper install subversion produces following error message:
zypper: error while loading shared libraries: libzypp.so.619: cannot open shared object file: no such file or directory.
View 5 Replies
View Related
Oct 4, 2009
I have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
View 2 Replies
View Related
Aug 11, 2011
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
View 12 Replies
View Related
Mar 28, 2010
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies
View Related
Sep 4, 2010
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
View 1 Replies
View Related
Apr 10, 2010
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading.
error: no such partition
grub rescue> _
Have I killed my computer or is there some way I can fix it?
View 5 Replies
View Related
May 3, 2010
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
GRUB loading.
error: no such disck
grub rescue>
View 2 Replies
View Related
Apr 30, 2011
I applied all updates to my Kubuntu 10.04 installation, and shutdown and went to bed. Booted up this morning and found:
[code]...
This error is returned if the module load command is used before loading a Multiboot kernel. It only makes sense in this case anyway, as GRUB has no idea how to communicate the presence of location of such modules to a non-Multiboot-aware kernel. lets re-install GRUB. So I booted up my live CD, and ran:
sudo GRUB
find /boot/grub/stage1
root (hd0,0)
setup (hd0)
quit
sudo shutdown -r now
Same error. So I started looking around, and most complaints of this particular error seem to be dual boot environments, which I found rather odd, as I have never dual booted this machine.....
View 1 Replies
View Related
