I installed Windows XP and then Ubuntu on the remaining disk. However, each time I go back to windows, windows decides to destroy grub and it stops loading, then I have to use a rescue disk and do a grub-install again. It's annoying to have to do this everytime I go to windows. Is there a way to avoid windows to destroy grub? Or install grub on a place windows cannot touch?
View 4 RepliesMy Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies View RelatedI have 3 hard disk drivesone regular and two sata: Ubuntu / is installed on sata /dev/sda6 Ubuntu /boot is installed on /dev/sda1econd sata hard disk /dev/sdb is emptyI have just reformatted it to ext3third hard disk is /dev/sdc with some fat and ext3 partitionsif I shutdown computer, then plug out one of sdb/sdc or both of themthen after BIOS I see grub menu (as usual)but if I hit any keyboard button the computer automatically rebootswithout any messagesI tried hitting c,e,enter - reboot I tried reinstalling grub like this:
$ grub
grub> find /grub/menu.lst
(hd0,0)
[code]....
I upgraded to the new Ubuntu and when the computer boots up, it stops half way through loading and this message is displayed: "Starting periodic command scheduler crond Checking battery state... ...Done."
View 4 Replies View Relatedi reinstall it but just one of my ubuntu came.by the way i have 5 ubuntu 9.10 and 1 windows xp.how can i add my windows xp to grub loading?
View 2 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I had a few system problems, and decided installing Linux might offer a good tool for fixing them up, plus I've been meaning to kick the tires on the latest version. Anyways, after a bit of futzing with disks, windows and linux install disks and the bios, the problems seem to have fixed themselves, and I've got a partition with Linux on my boot drive.
Now, as soon as I successfully booted to the grub menu I booted into windows and used EasyBCD to set up the dual boot as per [URL]. Then I tried booting into Ubuntu (Version 10.10), and after one or two screens flashed by too fast for me to really make them out, it halted on a black screen with white text. At the top was the line: Grub4dos q.4.55 2010=07=25, mem 636k/3326m/4864m end:34c6cb There was a boxed paragraph explaining minimal "Bash like" editing was supported, then below was Grub> And of course because I modified the boot before booting from the origional loader, I don't actually know if this is a problem with the install or something messed up by EasyBCD.
I used Update Manager to upgrade an NVIDIA-based machine from version 9-something to 10.04.
Windows now have NO titlebar !
If I screw around with Visual Effects, the title bars come back but only temporarily and system video display is extremely sluggish. CPU usage is very high due to some process named compiz or xcorg. Upgrades always seem to self-destruct, is this fixable?
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I recently re-installed my dead home server with Ubuntu 9.10 Server but it seems that there is a large delay loading grub, before the error "error: no such disk" comes up and the Ubuntu finally boots normally. I've videoed it, see what I mean at http://www.......com/watch?v=0H7hsa5QIc0 .
What would be causing this error and how would I go about fixing it?
I've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
Ubuntu 10.04 not loading. Sticks at GRUB Loading message.
Read the other threads re OS not loading and GRUB. The talk about code goes over my head.
Local techie says the hardware is good. Tried reloading Ubuntu from CD. Tried loading the unmentionable OS.
Tried using Spotmau Powersuite.
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies View RelatedThe follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies View RelatedI've just bought a new laptop (with no installed OS) and have (excitedly) burned a live cd for Karmic Koala 64bit: several people on the laptop manufacturer forums have got working with this particular laptop.
The live session works fine but when I install and then reboot I get 'GRUB Loading' with a flashing underscore and nothing else happens. I've found this thread and this bug report and have tried reinstalling GRUB to no avail.
I also have a live cd for 9.04 which I've tried to install and get a the same problem only now the message is 'GRUB Loading stage1.5' So I don't think it's a problem with the version of GRUB as described in the bug report thread.
I read something else that said it could be a problem with the mbr being in some way geared towards Windows but I'm not sure. I tried following those instructions but nothing happened and then I just got the same error again.
Any help would be greatly received since obviously I'm pretty desperate to get my spangly (and expensive) new machine to work. Edit: I also have a thread at the manufacturers' forums. But we're at a loss there too.
I had dual boot (windows XP and 10.4). I upgraded to ubuntu 10.10. Post upgrade I got a grub rescue prompt.
After that I followed the grub recovery procedure.
[URL]
I did not get any errors during the procedure.
However post reboot I get nothing. just a black screen..not disc activity either.
I have been using Ubuntu for a while now on a netbook and even installed it on another pc, but I never tried dual-booting before... I just recently built a pc (my first custom build), and I'm having major difficulties getting a dual-boot running with Win 7 and Ubuntu 11.04. I'm trying to install these on one hdd. I don't know if it's a hardware issue or not, but the bios doesn't seem to like grub... I installed Win 7 first, and before installing Ubuntu on a separate partition, Win 7 would boot up fine. (Although, sometimes the bios would ignore my key presses for entering the bios menu or the boot-menu... When I only had Windows installed.)
When I turn on the pc, I mostly get a blinking cursor, with no messages at all. Nothing would boot at all, grub doesn't seem to load, and no OS would load by default. This would even happen sometimes after I set CD-ROM as the first item on the boot order list, trying to boot from the Ubuntu liveCD since there was no way for me to reach either of my installs on my HDD. I tried several suggestions I found online, and nothing seems to help. I even tried both grub 1.99 and grub 0.97, but still not much luck, (Although, grub legacy seems to load slightly more often...) I don't really want to have to resort to using Ubuntu through a VM, but it looks like this is the only option left... Is there some way I can dual boot with something other than grub?
Here's something I noticed after trying Ubuntu a few times. I'm not sure how relevant this is to my issue but, at times, on booting from a liveCD, I see several lines appearing that say something like "over-current change on port 2" should I be worried about this? Is something wrong with my mobo or psu? Another thing and this was before installing Ubuntu, when I boot up the pc, my keyboard is sometimes disabled until it's re-plugged in to a usb port. Maybe this has something to do with over-current charge? I'm just trying to figure out if anything needs to be replaced... I got sick of having to replugin the keyboard since I was constantly restarting the pc, so I started using a less fancy keyboard and it seems to be recognized most of the time (sometimes the bios would still ignore my boot-menu key press attempts).
i couldnt run ubuntu after installing kubuntu desktop , it stops on the last step before opening the login screen i clicked ctrl+alt+F1 and login in terminal i typed xinit the result is as follow :
x.org x server 1.9.0
release date: 2010-08-20
x protocol version 11, Revision 0
[code]....
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies View RelatedI want to use my BootIt NG boot menu. How would I go about installing Debian 5.0.3 and prevent Grub from loading into MBR? I don't remember being asked by the installer where to put Grub. Unlike Fedora where you can choose MBR or boot section of the target partition. Debian 5.0.3 -
View 2 Replies View RelatedI am trying to install fedora on my semi aging PC. It installed fine and prompted me to reboot. So I did, but then as soon as it tries to load the grub menu, it gives me the following error: no such device: 2cb414b7-7620-48a9-93af-f03aec3495e4How do I restore grub and make it work? Right now I am using the livecd to type this. I do not really need the grub loader since I am only running one OS, which is currently fedora. I recently had Ubuntu 10.04 which did not have grub (at least it is not shown during the boot) and suited me more than fine.
View 3 Replies View RelatedI have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
I have installed fedora core 9 with a successful installment but the GRUB is not loading Vista BOOT MGR is Missing root chain loader +1. Booting Other does not load.
View 14 Replies View RelatedI'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
I'm stuck in Memtest86, everytime i boot it gives me an option to go into BIOS, and then it says "Loading GRUB." After that it automaticly goes into memtest, and I've let it finish numerous times without giving me errors. I've installed Linux Mint 8 via Unetbootin, I have a nearly fresh install of windows 7 on my laptop.
View 1 Replies View Relatedreally wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
I installed Fedora 13 to sdb7 and installed Grub to root all went well on install. But when I reboot it stops at Loading Partition.
View 12 Replies View RelatedWhen i boot its all ok i press enter for instal ubuntu and than the normal screen When it finishes loading i get a random mashup of my windows desktop.
View 1 Replies View RelatedI use to have vista and ubuntu on my PC. Yesterday accidentally I created a new partition "table" the point is that I erased all my partitions on "MyDisk". After a while I decided to re-install ubuntu ( 9.10 karmic koala ) and take advantage of the situation and upgrade to Windows7. Since I already had the ubuntu cd, I installed it first, then downloaded the Win7 cd to install it. The problem is that Windows7 installer doesn't load.
All I get is:
<<BLACK SCREEN>>
Grub loading.
<<BLACK SCREEN>>
underscore
Ubuntu logo
ubuntu login
So I don't know whats wrong. Right now my disk looks like this:
MyDisk >
MyDisk1 ntfs ( For windows 7 )
MyDisk2 > extended (using linux with 2 more partitions: ext4 and linux-swap)
I've recently installed Ubuntu 10.04 it installed and chain-loaded correctly however I installed it on partition that was too small so I used gParted to copy the files 1:1 to a freed up partition.The result was it copied fine but the Grub file became messed up.
I had to manually reinstall Grub2 from the LiveCD and the Linux was starting up fine, however now I'm unable to boot to Windows.Is there an easy way to reinstall/re-chain the Windows bootloader so its able to chain-load from Grub.