OpenSUSE Install :: Grub Loading Stage 1.5 Error 21
Jun 13, 2010
I installed opensuse 11.2 64bit on my external hard drive with the idea that this way the two OS would be completely seperate and I could just use suse when I felt like it. Everything boots fine for both OS when the hard driv is plugged in but when it is unplugged I can't get past a boot screen which says: Grub loading stage 1.5 Error 21 I have seen on another forum a fix using the windows install disk but I no longer have this. Is there some other fix I can use to make my laptop portable again.
View 9 Replies
ADVERTISEMENT
Aug 22, 2011
I just installed LXDE by pluging the P-ATA drive into my current PC (with my 2 S-ATA drives being plugged in). Not worked first time, probably because I pushed the drive too hard into the old PC. Formatted again, installed LXDE again (this time my S-ATA drives plugged out). Works fine with the old PC, but when I try booting from my current PC now it says: "Grub loading stage 1.5 ... Grub Error 21". No menu, nothing ... And because I plugged my S-ATA drives out, when installing LXDE the second time, the config file, grub is probably searching for on the P-ATA drive, is somewhere in nowhere. Googled it 2 hours ... Yast2 Bootloader and grub-install are just trolling me. The drive I installed LXDE (32-bit) on, is an old P-ATA, with first 30 GB, then suddenly 80 GB (don't ask, I don't know either. First formatting was 500 MB swap and the rest Ext4. Second formatting was 1011 MB swap and the rest Ext4.
View 2 Replies
View Related
Jul 28, 2011
A few days ago I installed openSUSE 11.4 on a 1TB HP external hard drive. I have some very important files for school and personal work on my main hard drive, running windows 7, so I made sure the installation only affected my external hard drive. With the external hard drive plugged in it boots just fine but when it is un-plugged it says Grub loading stage 1.5. Error 21 and it won't do anything. This kind of pisses me off because there were no warnings and nothing was supposed to happen to my main hard drive. But this has already happened and now I want to know if there is any way I could fix it so I can boot windows 7 normally and still boot openSUSE with the external hard drive plugged in.
View 6 Replies
View Related
Mar 27, 2010
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
View 9 Replies
View Related
Jul 20, 2010
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
View 1 Replies
View Related
Jan 6, 2010
I'm trying to install ubuntu from a CD. I believe it is version 8.4 The install seemed to go fine and I rebooted my computer and immediatly after start up I get a message that says: Grub Loading stage 1.5.
Grub loading, please wait... Error 18
I have no idea what this means or what to do and Im not the most computer savy guy. My computer is stuck and will do nothing at this point.
View 3 Replies
View Related
May 2, 2011
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
Linux 2.6.34-12-desktop i686
System: openSUSE 11.3 (i586)
KDE: 4.4.4 (KDE 4.4.4) "release 2"
View 2 Replies
View Related
Jul 31, 2009
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
View 9 Replies
View Related
Aug 4, 2010
I'm trying to install Debian Lenny on my new Dell XPS 8100 Desktop with 2 x 1To SATA HD. (No Windows or any other OS install is present on the system) The Bios allows me to change the SATA mode to either "ATA" or "RAID"
- When SATA mode is set to RAID, the installation goes without issues, but when it comes to load into the system, I've got that Stage 1.5 Grub Loading... Error 2 problem. I assume this is due to the Bios "RAID" configuration. I then switched the SATA mode to "ATA" in the Bios and now I can see the menu that allows me to boot my debian install but that part actually fails too saying "ALERT /dev/sda1 does not exist"
- When SATA mode was set to ATA, I tried to re-install the system but this time my drive was not recognized by the installer: "No common CD ROM drive"
View 2 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Oct 16, 2009
I'm using Arch with the latest updates and I'm pretty sure this is a software problem.Basically about one out of five times my system freezes at "Grub Loading Stage 2". Whenever this happens, I usually just reset my box with the reset button and it will boot up just fine the next time.I originally put it down to being a defect in my hard drive which is probably three years old now at least. However, last week I bought a brand new 1.5TB drive. I removed my old drive and am using only my new one. Same problem.I Googled for this problem and found a bunch of posts with the same issue as I'm having, yet all of those issues are with people that dual boot with Windows. I don't. I only have Arch and no other OS on my system. I then tried reinstalling Grub and that doesn't seem to have solved it.I'm hoping someone can help me out with this. I hope it's not a hardware problem. Any help is VERY appreciated as this problem makes me worry that something worse is going on.
View 3 Replies
View Related
May 23, 2010
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
View 8 Replies
View Related
Jul 10, 2010
ok so i jut installed ubuntu from an old live cd, i had to upgrade it twice to get it currant, and i also have a win 7 os on my box. Now when I try to boot I only get as far as the grub loading screen where an error 17 pops up, google says thats because it can't boot the selected boot partition but i cant even select my windows partition. im on the old live disk right now.
Here's a screenshot of a sudo fdisk -l command [url]
View 9 Replies
View Related
Jan 8, 2010
I went through the procedure to install Ubuntu 9.10 alongside Windows XP. The installation completed without complaint. But when I reboot the PC I get the error message "Grub loading error: no such partition...". and the keyboard is dead. I am using a Sony vaio PCG-FR215H laptop on which I have fitted new HDD and CD-drive. I carried out the installation by first booting up a live version of Ubuntu on a USB thumb drive and then clicking on the 'install Ubuntu' icon on the Live Ubuntu desktop. (I coudn't use a Live CD to install as this fails for some reason). I regained use of Windows XP on the PC by booting with a Windows 95 boot floppy and typing "fdisk /mbr". So, does anyone know what might have cased this grub error? Also, are there ways to try and fix the problem manually. I.e. can I get a copy of good versions of the files that are likely corrupted and then replace the stuff that I will have written over when I did the "fdisk /mbr"?
View 9 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Dec 4, 2009
I have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said
splash=silent
and
quiet showopts
I was wondering what they meant?
View 2 Replies
View Related
May 3, 2010
My Server runs "fine", then I type init 6 for rebooting or some cron job initiates Init 6 and my system stops in grub at: GRUB loading stage1.5. Error 18 After another Ctrl+Alt+Del the system boots as if anything happened. this is why I doubt that it's an issue of too big HDD or BIOS.
View 2 Replies
View Related
Feb 9, 2010
I know nothing about this at all. I have never programmed a computer.. I loaned my tower to a friend who put this on ...now i have it back and cant get to my windows 98. all i get each time i boot is ...
GRUB loading ... error:no such disk grub recover>
I have tried ubuntu sec 8.4 recover mode and all i get is unreconized command.. i do not know how to set anything.. i have no disks for this not even the orginal windows recover disk.. is their anything i can do to get win to run as it use to??
View 1 Replies
View Related
Apr 24, 2010
I'm trying to install 11.2 Gnome from the live cd on an HP n410c laptop. The install seems to go smoothly until I'm told I must reboot without the cd. I've tried three or four variations of the process and each time I see, "Error Loading Operating System."I've reloaded the live cd and examined /boot/grub/menu.lst. It appears to be correct. It seems like the initial GRub loader isn't found in the MBR.If I run grub-install, the graphical interface comes up then complains, "Because of partitioning, the boot loader cannot be installed properly."
View 2 Replies
View Related
Jun 29, 2011
Installed 11.4 on a machine with two SATA drives which had previously been running Windows 2003. I deleted the Windows partitions and created a new partition scheme: Swap, root and one additional partition on the first disk, one large partition on the second disk. Install runs fine but upon reboot I get "Error loading operating system". Booting off a Windows floppy and running FDisk shows that the root partition is marked as active.
View 7 Replies
View Related
Oct 4, 2009
I have an Ubuntu Jaunty server with 4 x 1 TB Hitachi SATA Hard drives and a 4GB IDE Flash Drive. I installed the root file system to the IDE Flash Drive and setup the 4 x 1 TB Hard Drives as a RAID 5 for the home partition (I actually allotted 3 Gigs on each drive as swap space as well). My problem occurs however when I restart my computer after the server installation. Grub doesn't load fully and I am left with a "GRUB_" message on the screen.My root partition is ext3 and I have also tried the same configuration with a boot partition as well on the IDE drive to no avail.
View 2 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Jun 9, 2010
I have installed 11.2 from OpenSuse DVD on a clean partition. The problems I am having are: Updater Applet - it keeps trying to do the update and fails with the message: DBus error: Unable to get transaction id from packagekit. svn. I am trying to understand how to run svn client. I found installation instructions here. However, running the command zypper install subversion produces following error message:
zypper: error while loading shared libraries: libzypp.so.619: cannot open shared object file: no such file or directory.
View 5 Replies
View Related
Jun 10, 2010
I have the computer hooked up to a TV via HDMI. The resolution of the booting process is set to 1280x720, and then KDM goes to the correct 1360x768.
Sometimes when I boot, the TV does not receive a signal until the boot stage reaches the KDM. I do not know how to reproduce this exactly.
View 3 Replies
View Related
Dec 5, 2009
To upgrade my system from 11.1 to 11.2, I followed he instructions at:openSUSE Lizards � Updating in Place From openSUSE 11.1 to 11.2
However, it failed and now I am stuck with this error:
Code:
zypper: error while loading shared libraries: libaugeas.so.0 cannot open shared object file: No such file or directory
View 9 Replies
View Related
May 17, 2011
This is a IBM T23 (10 years old)pentium3 1.1ghz640mb ram28gb hdd (contianing several bad sectors)intel graphicseverything works out of box (graphics, wireless, etc) on a live cdhowever after installation, upon boot, it displays "Error loading operating system" right after BIOS and before even goes into GRUB and is stuck there.Enter live cd, and choosing boot from harddrive does not solve the problem.Already did the CD check, which shows no problemdid a bit googlingturned out this could be an issue with a dying harddriveand sadly, it is the case, the harddrive on this 10 year old laptop is indeed dying D:However, installing windows xp posed no problem... (altho tons of driver issue, but anyways...)I have a few solutions in mind1). just use a usb stick as the replacement for harddrive2). get a new harddrive (not even sure what to get for this laptop D: )3). find a magical way to fix it :SWould definitely be glad to know a way to load this system on this existing harddrive for nowI was told earlier that there are ways to tell the system to avoid mapping the bad sectors.
View 5 Replies
View Related
Mar 9, 2010
when i reboot my system i give the grub loading error and system doesnt start up me the solution how to resolve it
View 4 Replies
View Related
Jul 13, 2011
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
View 9 Replies
View Related
Apr 10, 2010
I was and idiot and stared messing around gparted before I was ready to partition my hard drive. Consequently I messed up my partitions, and when I restarted my computer a screen comes up that reads:
GRUB loading.
error: no such partition
grub rescue> _
Have I killed my computer or is there some way I can fix it?
View 5 Replies
View Related
May 3, 2010
I have a dual boot system with Windows 7 and Ubuntu 9.10. I booted into Ubuntu and started the process to upgrade to Ubuntu 10.04. When it was all finished, it restarted and attempted to boot into the GRUB load screen. However, I get this message:
GRUB loading.
error: no such disck
grub rescue>
View 2 Replies
View Related
