Fedora Hardware :: Wusb54gc V3 No Such Device
Nov 5, 2010I followed NDISWrapper to a T, but when I enter the command: ifconfig wlan0 up
I receive the error: wlan0: unknown interface: No such device
ADVERTISEMENT
Fedora Networking :: Can't "activate" Wireless Device WUSB54GC?
Sep 23, 2009I installed Fedora 11 last night, and it seemed to go OK. The trouble is, I cannot get a wireless connection to the internet. The system seems to recognize my wireless USB adapter, but the buttons to activate the device remain grayed-out no matter what I try. I ran through all of the steps in the help menu (still grayed-out); I tried deleting and adding the device (no go); I tried to run the installation disk that came with the USB adapter (wouldn't run); I pulled the drivers off of the installation disk (Fedora couldn't recognize the file type); I changed it from "wlan" to "eth0" to "eth1"... but still no love!
This doesn't seem like a problem between the adapter and the router... the USB adapter and my PC can see each other, but can't "talk" to each other.
Info:
PC - Dell Optiplex GX50 (circa 2001)
OS - Fedora 11
USB adapter - Linksys WUSB54GC
Wireless Router - Linksys WRT54G (reflashed with dd.wrt)
OpenSUSE Wireless :: Linksys WUSB54GC Not Working?
Jul 12, 2011The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
Ubuntu Networking :: WUSB54GC Won't Connect / Get It To Work?
May 24, 2010I got a wireless USB and I can't get it working. I bought it knowing it has Linux drivers (I want to stay as far away from ndiswrapper as possible) but I'm not having any luck.
Could anyone help me get it working?
Ubuntu Networking :: WUSB54GC Not Working On 10.04 / Resolve This?
Jun 17, 2010I recently installed lucid Lynx in my laptop, everything works great except my WUSB54GC (v3) usb wireless adapter, the green light in the usb stick stays off and the OS don't recognize the USB either (i have been using it in WIN7 so i know its not broken)
reading previous post i tried the following:
sudo gedit /etc/modprobe.d/blacklist.conf
Added a line
blacklist rt2800usb
after restart it was recognized but only worked for a little while (with download speeds about 30kbps and disconnecting every 30 min or so ) today it wasn't working at all
I have also tried installing the driver provided by linksys using the "windows wireless drivers" obtained by ubuntu software center, no luck there
General :: Install Linksys Wusb54gc Adapter?
Apr 9, 2010I bought this adapter today but my computer running on Ubuntu 9.10 doesn't recognize the CD.
How do I get this work?
OpenSUSE Hardware :: Getting Proper Drivers For Linksys WUSB54GC?
Jul 15, 2011Hey, I'm just set up my first Linux machine running openSUSE 11.4 and I'm not sure where to get the drivers for a Linksys WUSB54GC USB wifi card. I've read about using ndiswrapper to use the Windows driver, is this the best route?
View 1 Replies View RelatedUbuntu :: Linksys WUSB54GC Enhanced Driver Installation?
Mar 14, 2010I've searched google and read quite a few threads on the the topic of installing the new enhanced rt73-k2wrlz.3.03 driver and modprobe my rt73usb driver but I'm running into a road block here when I get these messages after I run sudo make install.I have attached a screenshot.I have already run sudo aptitude.Sudo aptitude safe-upgrade.Sudo aptitude install linux headers.
***Update /etc/modprobe.d/ralink alias for wlan*
***Install firmware in /lib/firmware...
***Check old config
Is it having problems locating the firmware; How do I update the alias.I can get online to learn. Something to not is I've tried blacklisting the drivers before installation and also after. This time I still havent modprobed rt73 from following this thread: http://ubuntuforums.org/showthread.php?t=1178790 nor have I plugged in my Wireless adapter during the installation phase yet.
Ubuntu Networking :: How To Install WUSB54GC V3 Wireles Adapter On 10.10
Nov 9, 2010I just installed Ubuntu 10.10 on my thinkpad t30 and I can't get my usb wireless adapter to work. My adapter is a wusb54gc v3 from linksy's. My kernel is a 2.6.35-22-generic.
View 1 Replies View RelatedUbuntu Installation :: Linksys WUSB54GC Wireless Connected But No Internet Connection?
May 7, 2010I am closing this thread and ask this question in the "Network and Wireless" area. As for the installation of 10.04 - wonderful. However, my problem is not an installation problem. Ubuntu 10.04 - Fresh install on machine with no previous OS it was a beautiful install experience. I have a Linksys WUSB54GC little plug in thing that is in one of the USB ports At the top of the screen it says that the computer is connected to the network genevapubliclibrary 100%
But when I access firefox, there is no internet connection. I checked the Preferences, Advanced, Network tab, Connection and the Settings button. It is set to "No Proxy". This is the same setting as our library laptop - also wireless - in firefox but using vista. If this has been addressed elsewhere, I apologize. I tried looking for linksys wusb54gc but no one had this problem.
Fedora Hardware :: Full Speed USB MSC Device Detected As Input Device?
Apr 7, 2011I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies View RelatedFedora Installation :: Device Driver For Usb To Detect Device?
Sep 19, 2009I am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies View RelatedFedora Networking :: 3G USB Modem Has Wrong Device Port In NM - Change Device Port In Network Manager?
Aug 14, 2009I installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedFedora :: Cannot Add Device In HP Device Manager?
Jun 28, 2010Running Fedora 13, I cannot add my HP J4680 through the HP Device Manager. I get an error message saying that the print queue cannot be started and it asks me to restart CUPS. I tried restarting CUPS and adding the device. It did not work. The printer is on my home network wirelessly. I can add it through the CUPS web interface and print, but then I cannot access the scanner. I tried adding the device after it was already added through CUPS, but that did not work. I would like to use the scanner; I don't really care about the fax.
View 8 Replies View RelatedFedora Networking :: Open The Network Device Control To Activate It But There Is No Network Ports In Network Device Control?
Jan 7, 2010I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedRed Hat / Fedora :: Bluetooth Device Being Detected Partially In Fedora 15
Jul 5, 2011I have recently installed fedora 15, I'm trying to connect my mobile phone to my laptop through bluetooth, when I did setup new device it is just showing device address and (instead of name), and the forward button is not enabled..FYI - I have started and enabled the bluetooth services using systemctl
View 9 Replies View RelatedSoftware :: Cann't Find The Device Created Through Device Mapper In /proc/partitions?
May 15, 2011Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies View RelatedUbuntu Multimedia :: Unable To Open Device /dev/dsp - Device Or Resource Busy
Apr 13, 2010All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?
View 3 Replies View RelatedUbuntu :: Mdadm: Cannot Open Device /dev/sdb1: Device Or Resource Busy
Jun 11, 2011I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):
Code:
richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy
[code]...
Slackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager
Mar 11, 2010For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedGeneral :: Ubuntu - Find The Device Node File For USB Device?
Aug 23, 2011I've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
Hardware :: Possible To Access An IrDA Device As A Serial Device Such As /dev/ttyUSB0?
May 24, 2011the message from dmesg for the IrDA device:
[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]...
Hardware :: Retrofitting A Device File For A Mass Storage Device?
Jan 7, 2010here we have an older digicam (Jenoptik/Exakta Model "DC 22", if someone might want to know) that can be switched between some "PC Camera mode" and "Mass storage mode".Unfortunately, if attached to USB, it is always recognized as
Code:
UDEV [1262910483.475886] add /class/video4linux/video0 (video4linux)
lsusb tells:
[code]...
Server :: Lifekeeper Error - DEVICE FAILURE On SCSI Device - /dev/add
Sep 17, 2009Since May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies View RelatedFedora :: How To Create RAW Disk Device In Fedora 12?
Mar 4, 2010I got this information of creating raw devices and then starting the service service rawdevices start.But there appears to be no service 'rawdevices'. Please can anyone help me with this?Is there anyway I can create an disk /dev/sda7 and then link it as a raw device?
View 5 Replies View RelatedHardware :: USB Device Is Not Claimed By Any Active Driver For Every Device
Nov 10, 2010The error "USB device 6 (vend/prod 0x603/0xf2) is not claimed by any active driver." is in dmesg every time I connect my Logitech keyboard to my system. I also tried (all with the same error):
- Memory stick
- DVD-burner
- Compaq mouse
Fedora :: Anyway To Sync Mtp Device?
May 3, 2009Is there anyway to sync my mtp device? I use Rythmbox and quite like it. It will let me drag and drop songs onto my MTP device. What I'm looking for is a true sync. Something that will delete from the device if it's been deleted from my library. Or update, or anything really. Just a sync, not a drag and drop.
View 14 Replies View RelatedFedora :: Internal Usb Device ?
Mar 21, 2010I have an internal card reader that connect via usb. I'm finding that when I plug in a memory card a umount of the card "unmounts" the card reader. From that point forward I can't use the device without rebooting the machine! I've tried unloading the usb-storage module and reloading it but that doesn't help. I see the following entries in the messages file when I do that.
View 4 Replies View RelatedRed Hat / Fedora :: Identify An Usb Device
Sep 10, 2010When I mount an usb device, I want to get the information contained in the structure usb_device. This information tally with the device which is being mounted now (dev_name). So I want to get, for example, the path where the device will be mounted (/dev/sda) before it is mounted naturally.
View 1 Replies View RelatedRed Hat / Fedora :: How To Configure USB To TTL Device
Sep 12, 2010I have a USB CDC device that I want to use in Fedora 13.I have a USB to TTL converter that I want to use to connect a GPS with TTL output to my PC, since this PC does not have a serial port. I am running windows7 Ultimate, Fedora 13 and WinXp. The converter uses an FTDI chip.When I connected the device in windows 7 it showed as a USB device. However using the vendor supplied driver enabled it to be treated it as a COM port and I used a vendor supplied terminal to communicate with the device. The device however behaved abnormally and after a reboot stopped working showing an enumeration error.I switched to Fedora 13, where the device showed as /dev/ttyUSB0. I used stty -F /dev/USB0 ispeed 4800 and then cat /dev/ttyUSB0 to communicate with this device. It worked fine. However after a reboot it started behaving weird.
I used dmesg | grep tty and the output showed the device as being connected and disconnected frequently, although I did not disconnect it.lsusb sometimes showed an entry Bus 006 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) ICand at other times showed no such device. I thought there was a problem in the hardware.But then i connected the device to WinXP. It showed up as COM3 in the device manager. I changed the speed to 4800 bps and set flow control to XON/XOFF in the property of COM3. In the Hyperterminal application that ships with WinXp I set 8 bit data and no parity bit. It worked flawlessly. I have to make these settings at every reboot.However I want to use it under Linux (fedora 13). My guess is that if i can somehow set the XON/XOFF and 8 bit data, no parity things it would work fine