I have recently installed fedora 15, I'm trying to connect my mobile phone to my laptop through bluetooth, when I did setup new device it is just showing device address and (instead of name), and the forward button is not enabled..FYI - I have started and enabled the bluetooth services using systemctl
View 9 Replies
My onboard bluetooth is not being detected by SUSE 11.4. Fedora 14 has no problem detecting the hardware, but it just doesn't show up in SUSE 11.4. I have included a few outputs:
lsusb:
Code:
Bus 008 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
rfkill list
[Code]....
If I plug in a dongle, the Bluetooth icon shows up in the notification bar, and I'm able to add and remove devices normally. Is there support for my onboard bluetooth device?
I am working on an embedded system, which is an USB MSC device that supports some vendor specific scsi commands. I am using FC10 laptop as USB host for testing, and it runs some small apps based on sg3. All has been well for ~ a week. The FC10 laptop is able to communicate with the device and retrieve data. Suddenly, starting from today, the laptop is not able to properly detect the device. When plugged-in, the MSC device is detected as input device (I thought). This is observed from "dmesg" output and changes in "/dev/input/".The device under development is running at full speed. When I connect to winXP, no problem. A windows file explorer pops up, showing the content of the drive.Also, the FC10 has no problem with other USB flash drive (high speed).
View 1 Replies View RelatedI have laptop with bluetooth and I bought PS3 bluetooth remote. In windows this remote is working with EventGhost and I would like to use it in Fedora as well. This remote has to be paired without a pin code, which is how I paired it in windows.In Fedora, however, there is no such option "no pin" when using a standard way to connect bluetooth device.How can I pair this remote in Fedora?
View 11 Replies View RelatedFirst, excuse me for my bad english I want to connect a bluetooth device with the command rfcomm. In a terminal, I put the command :
Code:
rfcomm connect 0 00:80:98:E4:07:53
And the system answers :
Code:
Connected /dev/rfcomm0 to 00:80:98:E4:07:53 on channel 1
Press CTRL-C for hangup
On fedora 10, or 11, I can use this command with all users. On fedora 12, only the root user can connect and use this device. Other users have the message :
Code:
Can't open RFCOMM device: Permission denied What can I do to resolve this problem?
When a bluetooth controller I have connects I'd like a program launched (qjoypad) so that I can use it has a mouse. The controller has to be on before launching qjoypad otherwise qjoypad will not work.
So I was wondering if there is a way to launch a script when my controller connects, and then possibly when it disconnects to launch another script killing the qjoypad process.
EDIT: I created a script that checks if /dev/input/js0 exists, if it does then qjoypad is created
Code:
#!/bin/bash
while true; do
if [ -c "/dev/input/js0" ]; then
qjoypad
[Code]....
I use fedora12-Gnome as my major desktop OS. Every basic need was fulfilled , until I tried Fedora12 KDE and now Fedora13 KDE. The problem is with Bluetooth connectivity to my cell phone device. It connects to the cell phone and set trusted but I can't seem to see any option of "Browse files on Device". Does that mean in KDE I actually can not browse my Bluetooth connected devices?
View 3 Replies View RelatedI have two BT USB adapters on my fedora9 (2.6.27.19-78.2.30.fc9.x86_64).How i can tell which of them to bind as /dev/rfcomm0 device.It seems that rfcomm.conf doesn't say me too much about.
View 3 Replies View RelatedI have just installed the last FC distro, and everything works good, except the wireless network.I have a Linksys N-Ultra WirelessN USB wifi card, model WUSB600N.It uses the rt2x00 driver, concretely the rt2870 driver (at least, thats the driver included in the original device drivers CD).Right now, the problem is that i don't know how to make my Fedora 12 to enable and/or connect to internet.
dmesg | tail
usb 1-3: Manufacturer: Cisco-Linksys LLC
usb 1-3: configuration #1 chosen from 1 choice
[code]...
I hit some trouble upgrading from FC 10 to FC 12 using the netinst CD. I had previously successfully upgraded the system from FC5 to FC10 with the same method - that time everything went well. At first the upgrade went well - the installation program found my FC installation and detected the partitions right. The problem appeared when about 90% of the rpm's were installed. Anaconda was complaining about a fatal error with a package and quit.
After rebooting and restarting the installation program it does not recognize my partitions anymore and suggests I'd format them for a fresh installation. As all my data is there I'd rather not do that. I then rebooted again and chose "Repair" from the installation menu. I got to the console and noticed that all partitions mounted cleanly and all the data seems to be there. Trying to reboot from the hard disk almost works. The system gets up, goes through grub, gets the kernel running and mounts the disks but fails to launch Xorg.
I get to a terminal login from here by pressing Ctrl+Alt+F2. When I type the user name and press enter the terminal seems to crash - does not ask for the password but simply returns to the user name query. An error message flashes just after pressing enter but too quickly for me to read. When I boot from CD again and go to the terminal via the "Repair" option the previous events can be seen from /var/log/messages. Xorg tries to start and stops trying after a certain amount of failures. After that it says this:
Code:
init: prefdm main process (2123) terminated with status 1
init: prefdm main process ended, respawning
init: prefdm respawning too fast,stopped
[code]....
My best guess is that this happens because the upgrade was aborted before it completed and hence some necessary rpm's were left out. I figured I could possibly fix this by updating the packages with yum from the terminal if I got to log in. What should I do now? Could I for example try and manually copy some missing files to the disk as I can access it via the repair option?
I have a (partially) formatted DVD+RW disc, and need to do a full format in order for wodim to be able to properly write to it, since wodim does not do DVD formatting automatically, despite what its man page says. (I want to write using wodim, NOT growisofs, since wodim has a -pad option for zero-padding, and the -pad option to growisofs doesn't work when burning an ISO file.) ,
wodim -v dev=/dev/dvd -format
doesn't work on an already partly formatted disc, only an unused one. And
dvd+rw-format -force=full /dev/dvd
doesn't work either, claiming the command-line option is unimplemented (even though the usage is documented). Is there any natural way to do this, or do I have to do something ugly, like using growisofs to write an exactly 4.7 GB file to the disc?
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
View 1 Replies View RelatedI just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.
View 14 Replies View RelatedMy laptop (eMachines D730) has bluetooth but Natty does not detect it. Is there any way to enable bluetooth in Natty? Should I download drivers for it?
how to install my bluetooth's driver? This is the model name of my laptop's bluetooth: FOXCONN BCM92056
I run ubuntu 9.10. I recently convinced my wife to give it a shot. The problem is, the bluetooth dongle is detected and the icon appears when its plugged in, the mouse is found and says it is pointing in bluetooth manager but it does not move the cursor on the screen. I have tried 2 different dongles and both work correctly and control the mouse on my asus laptop. She is using a toshiba satelite. Both dongles show up in lsusb as hci0. I've tried everything on the forums and everything I could think of but no go. If she doesn't have use of the mouse for farmville I will be in trouble.
View 1 Replies View Relatedhave you ever used microsoft bluetooth mouse 5000? can you tell me how to configure it in linux or if it is at all useable in linux?
View 1 Replies View RelatedI have a Toshiba Tecra M5 that I dearly love; its operating system is Fedora 14 which I ALSO dearly love.I have been running Fedora on this Laptop since Fedora 10. And know it has Bluetooth; in fact, I know I've transfferred files from my laptop to my phone (and vice versa) before. However. It does not seem to work right now. When I go into the gnome-Bluetooth app, it just sits there ominously saying "No Bluetooth Adapters Present" I'd very much like to get bluetooth up and running, but I'm not sure what's wrong.
View 3 Replies View RelatedI've been having trouble in a couple of distros (including when I had windows installed..) getting my bluetooth working,
I have a dell vostro 1720, and the specs from dell insist there's a bluetooth adapter installed, and the laptop even has a little light which (ostensibly) indicates data being transmitted via bt... and, it's enabled in the bios.
though, dmesg | grep bluetooth
gives no results.
I've read comments on dell bluetooth for other dists, but can't seem to find any deb-specific recommendations.
So, how do i confirm that this laptop does *in deed* have a bluetooth adapter.. and... if there is one... how do let the kernel know about it?
I'm struggling for pairing my laptop with my phone to dial up internet. On slack 13 I configured hcid.conf but on the new 13.1 with the new demon bluetoothd I don't know how to pair on command line.Documentation is not a lot, or I'm not able to find it.
View 7 Replies View RelatedI'm using CentOS 5.4 x86_64 on my Dell Inspiron 1440 laptop. How can I configure my bluetooth device through CentOS?
View 5 Replies View Relatedi just installed debian wheezy on msi cx640dx. my bluetooth device not working. here is some information about kernel and modules.
kenel version:
Code: Select all$uname -r
3.2.0-4-amd64
--------------------------------------------------
lspci
Code: Select all$lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
[Code]....
How do I tell what comport a Bluetooth device is connected to? The software that i'm using needs to know what comport to connect to.
View 2 Replies View RelatedI'm using Ubuntu 11.04 and bluetooth turn/off is not possible. However, with 2.6.37 kernel it is possible. Now i have gathered whole info about the device(mac adress, usb port etc) from 2.6.37 and what i need is to somehow use those info in kernel 2.6.38 so that bluetooth works.
lsusb in 2.6.37 (while bt is on)
Code:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 1241:1603 Belkin Keyboard
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 09da:8090 A4 Tech Co., Ltd
[Code]....
I use fedora12-Gnome as my major desktop OS. Every basic need was fulfilled , until I tried Fedora12 KDE. The problem is with Bluetooth connectivity to my cell phone device.It connects to the cell phone and set trusted but I can't seem to see any option of "Browse files on Device".Does that mean in KDE I actually can not browse my Bluetooth connected devices?The same thing happened with Mandriva2010-Kde and Fedora13 Kde , I mean I guess It's related to KBluetooth app.
View 2 Replies View Relatedhow can i search bluetooth device in linux(redhat) without graphics
View 1 Replies View Relatedi have created dialup internet connection in windows xp using my bluetooth enabled mobile and bluetooth device ,,and my question is that how to set up the same procedure in my fedora 11 system.
View 1 Replies View RelatedI am developing an application which communicates with a bluetooth device.I do not want the user to pair or unpair the device using the Bluetooth applet or command line, but I want to automate the pairing process through my application. The application will scan and find the bluetooth devices in the proximity of the computer, and automatically pair the required device without any user input.Where should I look for the relevant APIs?
View 1 Replies View RelatedI am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies View RelatedAfter a lot of messing around and research, I figured out how to actually get my bluetooth headphones to connect and stay connected. Although once I shut them off, remove the device and re-add it using Blueman.
Right now, `pavucontrol` shows "Headphones (unplugged)" and there is no sound coming out of the speakers. But there is no sound coming out of the headphones either. They are set to the fallback. I've opened `alsamixer` and made sure everything was turned up. Still, no sound.
Since `bt-audio` isn't on Jessie, I don't know what I should do. It seems like this may be the missing step but I am unsure.
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies View Related
