The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
I am closing this thread and ask this question in the "Network and Wireless" area. As for the installation of 10.04 - wonderful. However, my problem is not an installation problem. Ubuntu 10.04 - Fresh install on machine with no previous OS it was a beautiful install experience. I have a Linksys WUSB54GC little plug in thing that is in one of the USB ports At the top of the screen it says that the computer is connected to the network genevapubliclibrary 100%
But when I access firefox, there is no internet connection. I checked the Preferences, Advanced, Network tab, Connection and the Settings button. It is set to "No Proxy". This is the same setting as our library laptop - also wireless - in firefox but using vista. If this has been addressed elsewhere, I apologize. I tried looking for linksys wusb54gc but no one had this problem.
Hey, I'm just set up my first Linux machine running openSUSE 11.4 and I'm not sure where to get the drivers for a Linksys WUSB54GC USB wifi card. I've read about using ndiswrapper to use the Windows driver, is this the best route?
View 1 Replies View RelatedI bought this adapter today but my computer running on Ubuntu 9.10 doesn't recognize the CD.
How do I get this work?
I've searched google and read quite a few threads on the the topic of installing the new enhanced rt73-k2wrlz.3.03 driver and modprobe my rt73usb driver but I'm running into a road block here when I get these messages after I run sudo make install.I have attached a screenshot.I have already run sudo aptitude.Sudo aptitude safe-upgrade.Sudo aptitude install linux headers.
***Update /etc/modprobe.d/ralink alias for wlan*
***Install firmware in /lib/firmware...
***Check old config
Is it having problems locating the firmware; How do I update the alias.I can get online to learn. Something to not is I've tried blacklisting the drivers before installation and also after. This time I still havent modprobed rt73 from following this thread: http://ubuntuforums.org/showthread.php?t=1178790 nor have I plugged in my Wireless adapter during the installation phase yet.
I read through the sticky of wireless card not working, and I followed through with the steps, with the exception of looking for firmware, because I'm certain it has it, being that the card works when I'm running Windows, and overall the system recognizes the device.
The only difference is, I notice that the activity light on the card itself does not turn on when running openSUSE. It recognizes the card, it even detects the network, but when I enter the WEP key and finish, it does nothing afterwards. Still no internet.
Card: Linksys WMP54G v4.1
I just joined this forum in hope of fixing my linksys wireless card, here is my problem. I have a old Compaq presario 1710sb laptop with a p1 32mb ram and a 2GB hard drive. I installed a Debian Lenny command line only install, I installed ndiswrapper from a etch .deb file I found on the internet but I can't find out how to get it working. I tried how tos on other sites but they didn't work, I need to get that card working before I can install a GUI.
View 14 Replies View RelatedI have a AE1000 wireless adapter and Ive been using it or about 4 months on windows xp. Yesterday I installed ubuntu 10.10 and it won't work It won't connect to the internet and won't even show signs that it is turned on.
View 5 Replies View RelatedI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI'm trying to install a Linksys WUSB600n dual-band USB wireless-N adapter onto a desktop system with opensuse 11.1 installed; this system will be migrating to a back porch with no cabling access, hence the wireless solution. Everything works fine under Windows XP, but on Linux, not so much. Hardware info is as follows; there is no "Wireless LAN" entry, but there is a USB entry:
99: udi = '/org/freedesktop/Hal/devices/usb_device_1737_71_noserial'
info.subsystem = 'usb_device'
usb_device.vendor = 'Linksys'
usb_device.bus_number = 1 (0x1)
linux.subsystem = 'usb'
usb_device.product = 'Dual-Band Wireless-N USB Network Adapter'
info.product = 'Dual-Band Wireless-N USB Network Adapter'
[Code]........
I'm not a new user to ubuntu but I'm stuck with a driver issue on a wireless adapter upgrade for ubuntu 10.04 lucid lynx. I'm running an acer aspire am1201-e1622a with amd athlon x2 64 bit processor, however i'm only running the 32 bit version of lucid lynx. The following are a few outputs of some commands that might assist in finding the proper driver. Before though i will tell you what i have done.
I have installed a few different drivers from windows wireless driver installer such as the xp and vista 32 and 64 bit versions with no success in the computer actually recognizing that i have a wireless adapter installed. The windows wireless driver installer said that hardware was present but i was unable to scan for networks or even see that i had a choice to do that. This meaning that it didn't show i had wireless capabilities in my network manager. i tested this with gnome network manager which is the default manager for 10.04 and also with wicd with no success.
Following these tests i attempted to install a driver from source following the instructions on another forum. This allowed me to manually turn on the wireless adapter but i was still unable to find any networks. This meaning that wicd was able to see that i had a wireless adapter installed but it for some reason was unable to see any wireless networks around. I'm 100% sure my router is in range and that it is configured correctly. I have 5 other computers connect to this router along with some of them being ubuntu.
[Code]....
I recently installed lucid Lynx in my laptop, everything works great except my WUSB54GC (v3) usb wireless adapter, the green light in the usb stick stays off and the OS don't recognize the USB either (i have been using it in WIN7 so i know its not broken)
reading previous post i tried the following:
sudo gedit /etc/modprobe.d/blacklist.conf
Added a line
blacklist rt2800usb
after restart it was recognized but only worked for a little while (with download speeds about 30kbps and disconnecting every 30 min or so ) today it wasn't working at all
I have also tried installing the driver provided by linksys using the "windows wireless drivers" obtained by ubuntu software center, no luck there
I got the WMP300N installed by using ndiswrapper, but in Network Settings in YaST, I enter in all the info, and it will not connect. I set the Module Name as ndiswrapper, but it still won't connect. I blacklisted bcm43xx as some guide told me to. Could that be the problem?
View 2 Replies View RelatedI have a Linksys WPC300N v1 "Wireless-N Notebook Adapter" which uses the Broadcom 4329 chipset. Is there a way to troubleshoot and configure this card to use wl, b43, ssb? Preferrably via CLI. I have a couple years of CLI experience in Debian/derivatives (but only in my spare time ).
I have this card recognized and running adequately in Debian (and derivatives) using the 'wl' driver (sometimes supplied by debian.org, other times by broadcom.com). The one hint at a solution for this particular card/chipset I have found searching the OpenSUSE (SuSE for short?) forum points me to using ndiswrapper, which I've never used nor care to if it requires wine. I'm trying to ultimately connect to a b/g/n WPA-1 TKIP wlan.
lspci -v:
03:00.0 Network controller: Broadcom Corporation BCM43XG (rev 01)
Subsystem: Linksys Device 0058
Flags: fast devsel, IRQ 11
Memory at f4000000 (32-bit, non-prefetchable) [disabled] [size=16K]
lsmod | grep 'ssb' returns nothing (neither do 'b43' or 'wl') but 'pcmcia' returns:
pcmcia_core 41748 3 pcmcia,yenta_socket,rsrc_nonstatic
When configuring this card in Debian, I first plugged in the card which resulted in some hard disk activity but the LED was not lit. After installing the driver, the LED came on but no network. After configuring the network, it works 'adequately' (no roaming mode) using the wpa_supplicant package and is readily identified during init.
This is not mission critical by any means so I'm not in a hurry and willing to try almost anything. However, this is an old laptop so I'm even somewhat surprised that KDE4 is running as well as it is (KDE 3.5.10 runs quite well, which is more than I can say for the latest Gnome DE; xfce "screams" relatively). Dell Latitude C-610 PIII-M 1.2 GHz 512 KB cache 512 MB RAM (YaST2 reports this as a C-640 but this does not agree with the BIOS splash). The display is an ATI Radeon LY using the 'radeon' server (default). I don't do compositing here. ;-)
I installed the Linksys WMP600N dual band card on my OpenSuSE 11.2 box using the SuSE supplied rt2860 driver. With the 2.4GHz channels this works out of the box. However, I am unable to access the 5GHz channels. iwlist says:
Leatherstocking:/home/bergue # iwlist wlan0 channel
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency:2.432 GHz (Channel 5)
Setting a 5GH channel with iwconfig doesn't work. iwpriv doesn't work either:
iwpriv wlan0 set WirelessMode=6
wlan0 no private ioctls.
Changing any settings in /etc/Wireless/RT2860STA/RT2860STA.dat doesn't seem to have any effect at all. The driver supplied by SuSE is of version 1.8. On the Ralink website a newer driver of version 2.3 is available; but so far I didn't manage to install it because I am not a C expert. However, the 5GHz channels should be accessible by the older 1.8 version driver. Somehow I suspect that in the SuSE distribution some dynamic parameters are hardcoded and therefore the whole thing fails.
After much tiddling'n'fiddling I finally got my new Linksys WUSB600N v2 working. Contrary to many posts, mine did NOT work with either the standard rt2870sta module, nor the updated version from the driver:wireless repo. Also the rt2870 version from the ralink website didn' t work. After a days worth of Googling I came across this post. The bottom line?
1. Download rt3572 from the Ralink website.
2. Add {USB_DEVICE(0x1737,0x0079)}, /* WUSB600N v2 */ to common/rtusb_dev_id.c
3. Follow README_STA
I did not install firmware packages. And be sure the rt2800sta module doesn' t get loaded. (you could just remove it, I suppose.)
I don't why this is but we have WiFi working on our computer. The only problem is that when I search for LinkSys folder or Cisco folder nothing shows up. Is there something I need to do for that? I have tried to search for it in the folders themselves by doing a search but nothing comes up.
View 7 Replies View RelatedI have installed Suse 11.4 from the Gnome liveCD, and I "can" access my home network when it is unsecured, however, I can't access it when WEP is turned on. Now, I know that WEP is insecure but there are devices on the network that only supports WEP so the router settings can't be changed. Also just for testing purposes i have tried the WPA2 encryption method to no avail (dmesg reports that the connection timed out). The only encryption method that looks promising is the open-wep encryption. When trying to connect to the network (with open-wep turned on) I have performed a bit of checking to see what is going on, now I don't know much about in-depth linux and stuff but, below are the outputs from lsusb, dmesg, iwconfig, and ifconfig.
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 077b:2219 Linksys WUSB11 V2.6 802.11b Adapter
dmesg
[Code]....
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
I installed Fedora 11 last night, and it seemed to go OK. The trouble is, I cannot get a wireless connection to the internet. The system seems to recognize my wireless USB adapter, but the buttons to activate the device remain grayed-out no matter what I try. I ran through all of the steps in the help menu (still grayed-out); I tried deleting and adding the device (no go); I tried to run the installation disk that came with the USB adapter (wouldn't run); I pulled the drivers off of the installation disk (Fedora couldn't recognize the file type); I changed it from "wlan" to "eth0" to "eth1"... but still no love!
This doesn't seem like a problem between the adapter and the router... the USB adapter and my PC can see each other, but can't "talk" to each other.
Info:
PC - Dell Optiplex GX50 (circa 2001)
OS - Fedora 11
USB adapter - Linksys WUSB54GC
Wireless Router - Linksys WRT54G (reflashed with dd.wrt)
I'm having some trouble connecting to the wireless network here at home. The PC has a Linksys WMP600N wireless network card, which works fine under several versions of Windows. In Opensuse however, I cannot get it to find the network. Even though my laptop is right next to it, which has perfect connection to the network. The router is a Linksys WRT610N.
I've tried running iwconfig and iwlist scan in the terminal, but the scan returns no results and iwconfig indicates it does not have a connection to a network. I've turned off IPv6 as I read this can sometimes cause issues. I've also tried issuing the computer a static IP address, figuring the DHCP might be causing problems, but all to no avail.
I have an Atheros AR5007 802.11 b/g WiFi Adapter. I use OpenSuse 11.3, KDE desktop.When I did iwconfig, it displayed the following:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"sami"
[code]....
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
i read the sticky post on here about how to try and get my wireless card working.
i have installed opensuse 11.4
i followed step 1 of post and got following: /usr/bin/lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
My openSUSE's working unstable and very slowly! Wireless is starting very late.It appears 10min later after i loggen in,and wants me to enter wireless password.This windows is showing up so late,and I can't connect internet before it shows up.
View 4 Replies View RelatedI have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
I have Lenovo G550 and openSUSE 11.4. Everything's ok, wifi without problems, I could connect to anywhere I wanted to, but yesterday while laptop was running and was connected actually by wire to internet, after removing the wire I realized that I cannot connect to wifi (the laptop was hibernated during night) - even the light diode in the front of the laptop was not shining. I went to yast and realized that the wlan0 isn't enabled and there's new eth1 port. But the wlan by ifup I cannot start and the eth1 I cannot start as well.
View 4 Replies View RelatedI have a strange problem with my laptop and need your help in resolving it...i am using a Dell Studio XPS 1645..i have got everything working except the wireless.. and the real problem here is that the wlan detects the network but does not connect to it and will keep on looping back and forward doing the same thing again and again..I am using Opensuse 11.4 with Gnome 3 Shell..here is details of the commands that i tried using to fix the issue
# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
[code]....