Ubuntu :: Linksys WUSB54GC Enhanced Driver Installation?
Mar 14, 2010
I've searched google and read quite a few threads on the the topic of installing the new enhanced rt73-k2wrlz.3.03 driver and modprobe my rt73usb driver but I'm running into a road block here when I get these messages after I run sudo make install.I have attached a screenshot.I have already run sudo aptitude.Sudo aptitude safe-upgrade.Sudo aptitude install linux headers.
***Update /etc/modprobe.d/ralink alias for wlan*
***Install firmware in /lib/firmware...
***Check old config
Is it having problems locating the firmware; How do I update the alias.I can get online to learn. Something to not is I've tried blacklisting the drivers before installation and also after. This time I still havent modprobed rt73 from following this thread: http://ubuntuforums.org/showthread.php?t=1178790 nor have I plugged in my Wireless adapter during the installation phase yet.
View 9 Replies
ADVERTISEMENT
May 7, 2010
I am closing this thread and ask this question in the "Network and Wireless" area. As for the installation of 10.04 - wonderful. However, my problem is not an installation problem. Ubuntu 10.04 - Fresh install on machine with no previous OS it was a beautiful install experience. I have a Linksys WUSB54GC little plug in thing that is in one of the USB ports At the top of the screen it says that the computer is connected to the network genevapubliclibrary 100%
But when I access firefox, there is no internet connection. I checked the Preferences, Advanced, Network tab, Connection and the Settings button. It is set to "No Proxy". This is the same setting as our library laptop - also wireless - in firefox but using vista. If this has been addressed elsewhere, I apologize. I tried looking for linksys wusb54gc but no one had this problem.
View 3 Replies
View Related
Jul 12, 2011
The usb device scans in Windows with a driver but i can't find a linux driver so i installed ndiswrapper.
ifconfig does not list the wlan0 device. iwconfig lists wlan0 YaST2 doesn't find any networks. Ethernet works just fine.
View 7 Replies
View Related
Apr 9, 2010
I bought this adapter today but my computer running on Ubuntu 9.10 doesn't recognize the CD.
How do I get this work?
View 3 Replies
View Related
Jul 15, 2011
Hey, I'm just set up my first Linux machine running openSUSE 11.4 and I'm not sure where to get the drivers for a Linksys WUSB54GC USB wifi card. I've read about using ndiswrapper to use the Windows driver, is this the best route?
View 1 Replies
View Related
Jan 11, 2010
I am trying to install a RaLink RT2570 USB Enhanced Driver for my Linksys WUSB54G that I found the driver here:I understand that I have to install full kernel source (I'm running CentOS 5.4 i386). I installed the source by the following commands that I found on the web:Install kernel headers: # yum install kernel-devel Kernel-headersInstall kernel source code:
# cd /tmp
# wget http://mirror.centos.org/centos/5/updates/SRPMS/kernel-2.6.18-164.10.1.el5.src.rpm
# rpm -ivh kernel-2.6.18-164.10.1.el5.src.rpm
[code]....
View 3 Replies
View Related
Apr 29, 2011
I use a Dual core desktop PC with Ubuntu 10.10. A hp-laser- jet 4250 printer is connected to it. I am getting able to print all files except .ps and .eps files. When I send a .ps or .eps file for printing, no job is actually reaching to printer.
View 3 Replies
View Related
Mar 21, 2011
Does anybody know where to find Linksys wpc54g driver for Ubuntu 10.10?
View 3 Replies
View Related
Apr 21, 2010
I was able to successfully put together the driver with the Linksys WUSB100 v2 using ndiswrapper.
Here is what i get from ndiswrapper -l: rt2870: driver installed device (1737:0078) present (alternate driver: rt2870sta)But, the catch is where it maps to: ra0 instead of wlan0. This has caused me problems in order to get it to connect through network-manager or in the terminal.
ifconfig output for ra0:
ra0:
Link encap: Ethernet HWaddr 00:1e:e5:e8:14:e6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
View 4 Replies
View Related
Aug 16, 2010
My 32-bit Celeron M laptop has a Linksys WPC300N PCMCIA wireless N card (Broadcom 4321 chipset).
I tried but have been unable to install the akmod version of the broadcom-wl driver:
Code:
Code:
Code:
Code:
Code:
FATAL: Module wl not found.
Code:
The card is recognized by lspci but the driver module broadcom-wl is not found. I don't see b43 and ssb modules so I can't blacklist them.
View 3 Replies
View Related
Dec 9, 2010
I recently had my AE 1000 linksys wireless adapter driver installed, the info for which can be found here:
[URL]
But today I was presented with 142 automatic updates already downloaded waiting to be installed on my computer. I installed the updates and restarted my computer for the updates to take effect. Well, since then my wireless adapter no longer registers at all, it doesn't even recognize my router let alone connect to it. It is as inoperable as the day I got it.
I am currently using a different computer in the house to get internet. Should I go about following the same directions I did before and reinstall the driver, or is there a more simple way?
View 4 Replies
View Related
Nov 27, 2009
ive got a Ubuntu v9 and i wanna get my internet to work on it, ive looked all over the place but i cant find a driver for:
linksys wireless-G USB network adaptor
model number:WUSB54G version: 4
View 4 Replies
View Related
Sep 7, 2010
Looking for driver for Linksys Wireless Notebook adapter WPC55AG
View 1 Replies
View Related
Jun 7, 2011
Does Ubunto have a driver for the WPC100 Linksys Adapter wireless card?
View 2 Replies
View Related
Mar 23, 2010
finding and installing a driver for the Linksys WUSB300N wireless adapter.
View 1 Replies
View Related
May 24, 2010
I got a wireless USB and I can't get it working. I bought it knowing it has Linux drivers (I want to stay as far away from ndiswrapper as possible) but I'm not having any luck.
Could anyone help me get it working?
View 9 Replies
View Related
Jun 17, 2010
I recently installed lucid Lynx in my laptop, everything works great except my WUSB54GC (v3) usb wireless adapter, the green light in the usb stick stays off and the OS don't recognize the USB either (i have been using it in WIN7 so i know its not broken)
reading previous post i tried the following:
sudo gedit /etc/modprobe.d/blacklist.conf
Added a line
blacklist rt2800usb
after restart it was recognized but only worked for a little while (with download speeds about 30kbps and disconnecting every 30 min or so ) today it wasn't working at all
I have also tried installing the driver provided by linksys using the "windows wireless drivers" obtained by ubuntu software center, no luck there
View 9 Replies
View Related
Jul 28, 2011
I've read a few threads, but I'm not sure that I have found the answer. I have a Dell E4310 laptop (company issued). It comes with the Intel HD Grpahics chipset. I've read people giving it great reviews so I am hopeful.I am running Natty. My first mystery was "what happened to the enhanced desktop effects", but I found a post saying they were removed in 11.04 -- apparently they just work if your video supports it. I've installed all the compiz packages including the enhancements. I am able to go into the Compiz Settings Manager and see all the modules. I am able to turn them on and off and change the settings, but anytime I try to use any of the keyboard shortcuts nothing happens.
I'm still relatively new to the world of Linux. Can someone tell me how I figure out whether or not my graphics card can support Compiz in 11.04?
View 9 Replies
View Related
Nov 9, 2010
I just installed Ubuntu 10.10 on my thinkpad t30 and I can't get my usb wireless adapter to work. My adapter is a wusb54gc v3 from linksy's. My kernel is a 2.6.35-22-generic.
View 1 Replies
View Related
Nov 5, 2010
I followed NDISWrapper to a T, but when I enter the command: ifconfig wlan0 up
I receive the error: wlan0: unknown interface: No such device
View 11 Replies
View Related
Mar 30, 2009
I'm trying to install vim-enhanced on a XenServer 5 system which is supposed to use CentOS under the hood. Being a debian user I'm not very familiar with the way packages work in CentOS. The problem is that the packages manager seems to do nothing. I assume that a repository is missing but I don't know which and how exactly to add it.
[root@icestation ~] yum install vim-enhanced
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
[Code]....
View 1 Replies
View Related
May 13, 2010
Does anyone have an opinion on the BELKIN F5Z0142uk Enhanced Wireless ADSL Router Network Kit, I want to setup a small home LAN and this kit caught my eye, it includes a usb Wi-Fi dongle for connectivity to a desktop computer, one of my pc's doesnt have a network card so this sounds like a good idea. Whats the build quality like and is it reliable. The link: [URL]
View 2 Replies
View Related
Jul 16, 2010
I just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
View 9 Replies
View Related
Jun 2, 2011
I can't install/configure this router. I have my PC connected to it via ethernet cable, and Ubuntu sees the connection, but I can't connect to the internet and I can't access 192.168.1.1. I've searched the forum, and I know there are a lot of threads on this, but neither were helpful and since the CD has only win drivers, I couldn't install anything.
I can access the internet through a phone using WiFi though, so theoretically everything is working, I just can't use it with the PC.
View 5 Replies
View Related
Dec 7, 2009
I have installed Fedora 12 on a Dell computer with an internal Broadcom wifi card. The installation fails to find the card and I don't find it listed among the available drivers. Any suggestions on how I can get the card working? Or, failing that how I can get the Linksys USB radio to work?
View 2 Replies
View Related
Jul 6, 2011
In regards to compiling a custom kernel:
When using make menuconfig - under Device Drivers --> Character Devices --> there should be an option with the label "Enhanced Real Time Clock Support" (CONFIG_JS_RTC).
The problem is that this option seems to only show up while using the menu method when other options are either enabled or disabled and I've entirely forgotten what should be what. I swear fingered it out once.
This is on an older computer (P4) so HPET is no good.
You would think that disabling the HPET option would enable the RTC option but that does not appear to be the case.
I understand I can just add the option to the .config file and avoid this hassle but I'm very interested to know how to make this work.
To show my appreciation I will do something nice for you such as call you a nice name or tell you that you are pretty (or ugly if that's what you prefer).
View 1 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Sep 23, 2009
I installed Fedora 11 last night, and it seemed to go OK. The trouble is, I cannot get a wireless connection to the internet. The system seems to recognize my wireless USB adapter, but the buttons to activate the device remain grayed-out no matter what I try. I ran through all of the steps in the help menu (still grayed-out); I tried deleting and adding the device (no go); I tried to run the installation disk that came with the USB adapter (wouldn't run); I pulled the drivers off of the installation disk (Fedora couldn't recognize the file type); I changed it from "wlan" to "eth0" to "eth1"... but still no love!
This doesn't seem like a problem between the adapter and the router... the USB adapter and my PC can see each other, but can't "talk" to each other.
Info:
PC - Dell Optiplex GX50 (circa 2001)
OS - Fedora 11
USB adapter - Linksys WUSB54GC
Wireless Router - Linksys WRT54G (reflashed with dd.wrt)
View 14 Replies
View Related
Jul 19, 2010
Currently I'm looking into implementing mod_security on all our apache servers. The installation on CentOS 5.5 comes directly with the "Core Rule Set" by the mod_security devs (curiously Debian and Ubuntu do not carry these) They also offer the Enhanced Rule Set for mod_security in a commercial package [URL] The main point there in their info link is the first point
Quote:
Tracking Credit Card Usage as required by the Payment Card Industry Data Security Standard However acc. to this wiki article ( http://en.wikipedia.org/wiki/Payment...urity_Standard ) that specific requirement isn't stated anywhere, as well as my colleague who's working on the PCI-DSS compliance for our code/servers/etc. mentioned that he hasn't heard of this specific requirement either. So my question would be if anyone has any experience with their ERS package and if it's needed for the PCI-DSS compliance compared to the requirements given in bullet points @ wiki article.
View 2 Replies
View Related
Jan 18, 2010
I have installed openSUSE 11.2 in my PC. To enable compiz I have download and installed (using OneClick) the nVidia driver for my nVidia GForce 8500GT video card.I need to enable the 'Enhanced Zoom' because I'm a low vision user and I need a magnifier better than Orca.The problem is that when i try to enable it (from ccsm) there isn't any zoom... I try to press META (or Super) and scroll with wheel (SUPER + Button 4) but nothing.
I have see that if I press Super+2 (increase zoom) the mouse pointer moves to a specific screen zone but the screen will not zoom.
View 9 Replies
View Related
