Fedora Hardware :: Get Xsane Running With HP C6380
Oct 18, 2010
I installed HPLIP, CUPS, ran hp-setup, and have a scanner detected in root, but not as standard user. I had some directions given to me in this forum, and I tried to follow them, but when I went into the man page as directed by one of the terminal commands, the directions there were cryptic. No success with changing permissions for sane-find-scanner in the file where permissions are supposed to reside. Started looking around down there at a couple of files and all I saw was garbage. how to change permissions for sane-find-scanner
View 6 Replies
ADVERTISEMENT
Dec 21, 2009
I started a thread that just brushed on the topic of running Xsane to scan with my HP c6380. However, the subject did not go very deep. It was alot about the printer, but not very much about scanning. It was also a previous installation and version of FedoraKDE. Now, I would like to take a moment to ask how to get Xsane up and running so that I can scan with my printer. I have it installed using $yum. However, the icon has not appeared anywhere and I am stumped.
View 14 Replies
View Related
Mar 22, 2010
This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
View 2 Replies
View Related
Jun 15, 2010
I thought I had a post out there that thoroughly covered this topic. But, I looked and I couldn't find it.Well, I am trying to get Sane to run so I could scan documents. I have printing set up, and the cups daemon is set to run at reboot. What are the following steps to achieve my objective,
View 9 Replies
View Related
Aug 5, 2009
I bought a HP Photosmart C6380 Printer a few days ago, and i am trying to make it work on my Laptop with Fedora 11 installed on it. Like all the ither posts concerning this problem, when i connect the printer by USB it works without a problem. I can ping the printer with success and i can also access the Web interface of the Printer. So i think that the Printer is connected correctly to my WIFI network. I have tried several things.
- I have tried to install it with CUPS, selected "HP JetDirect", put in the IP-Adress of the Printer, selected the driver for 6300
series. In the URI i had something like "socket://<IP-Adress of the printer>:9100". After that tried to print a test page -> Nothing.
- I tried it with IPP, same result, nothing.
- I also tried, after having read a lot here, to put "http://<IP-Adress of the printer>". After that, i tried to print a test page, and the printer seemed to work. But what i got was a lot of crap, really unreadable things.
Quote:
POST / HTTP/1.1
Content-Length: 492
Content-Type: application/ipp
[code].....
Here i got unreadable things
- I also tried the CUPS web interface without any result.
- I also tried HPLIP. Downloaded the latest version and installed it. After installation i ran "hp-setup". I tried all the three steps, the only one that worked was step one, USB. For the rest nothing worked. I did not try the printer connected by Ethernet, but i think that this should work, because i tried an HP printer at work an that worked. I have an WIFI access point, so no ad-hoc connection. On my wife's Laptop, where Windows Vista is installed, the printer works without any problem.
View 11 Replies
View Related
Aug 27, 2009
I downloaded HPLIP, and I began the install process. After 'make', it prompted me to restart. Thinking that would be good, I restarted. When I logged back in I tried to print a document, and it didn't print. I don't know what to do. I tried to follow the directions at http://hplipopensource.com/hplip-web...all/index.html, and they weren't very good. How can I tell if everything is installed for the printer? Once it is installed, how do I configure it and set it up? It is a wireless printer.
View 14 Replies
View Related
Jan 7, 2010
I have a new hp photosmart c4780 printer, and it's not working with gimp (which is the REASON i upgraded from fedora 10 to 12). I upgraded to 12 after i bought it a few weeks ago, and still can't scan from it. I have sane, and xsane installed
View 8 Replies
View Related
Aug 20, 2010
I've been scanning in large numbers of old photos for a friend, and up until now, xsane has worked like a charm. Today, however, it's spitting at me. If I try to select a file path in advance, and just save the images, it fails, suggesting that a link exists. (No, I'm putting them directly into the directory in question; no links involved.) I have to bring up the image in the viewer, select Save and select the path for each and every photo involved. Not only that, if I try using the file selection box to show xsane where I want things stored, it doesn't put the path into the box; I have to type it in myself. Considering that I have the best part of a hundred photos to scan, this isn't exactly an option. Does anybody have an idea what's gotten mungged, or how to unmung it?
View 1 Replies
View Related
Dec 14, 2009
In FC11 i686, I notice that after yum install xsane xsane -v reports a version of xsane that is compiled without Gimp support. Is there a special name for the xsane package that does have Gimp support?
View 2 Replies
View Related
Mar 11, 2011
I've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:
Code:
Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41
[code]...
View 4 Replies
View Related
Aug 4, 2010
The printer of my multi Epson CX5600 works fine, but when I run xsane I get the "No devices available" window. I tried running it as root with the same result. I have installed "iscan-firmware-2.1.1-1.fc12 (noarch) but it still wont work.h kernel 2.6.33.6-147.fc13.i686.
View 6 Replies
View Related
Jul 19, 2009
After "yum install emacs" & "yum install emacs-ess", I was able to install emacs on my X86_64 running Fedora 10.
If I run one session of emacs everything works fine.
Once I start a second session and try to resize or move the emacs window, the system stops responding.
View 1 Replies
View Related
Jun 5, 2010
I have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
View 5 Replies
View Related
Jul 21, 2009
I had no problems with it the last time I compiled it on this box under the same distro and version but this time I keep getting this error... Code...
I've googled "xsane-back-gtk.o" but there's very little on it and nothing I can use to fix it. Anyone have an idea what's wrong or missing?
View 4 Replies
View Related
Jan 23, 2016
I cant scan in 1200 dpi resolution with xsane, it only shows (75,150,300, 600) range of scanning.
My printer is a Canon Pixma MP160, and it can scan to 1200 using xp in virtualbox..
How to get 1200 option in xsane?
View 0 Replies
View Related
Aug 2, 2010
I have scanner working nicely, but...When I launch xsane, the scanning for devices upsets my tv-tuner.Xsane accepts a device name in the command line, but how to put it there?sane-find-scanner gives:found USB scanner (vendor=0x04e8, product=0x341b) at libusb:003:003found USB scanner (vendor=0x0c45, product=0x602d) at libusb:002:002
View 1 Replies
View Related
Aug 8, 2010
My setup:
- scanner - Canon MP640
- sane 1.0.21
- xsane 0.997
Problem: xsane recognizes my scanner, but when I try to "Acquire Preview" or scan it doesn't do anything. It's like it can't communicate with the scanner. It waits till I click cancel.Sane is setup correctly - I tried skanlite and it works just fine
View 6 Replies
View Related
Jan 7, 2010
I want to send a fax using xsane image scanning program.I've captured the image of the document I want to fax , but I just don't see any option to fax it.
View 1 Replies
View Related
Mar 4, 2010
I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
View 5 Replies
View Related
Sep 1, 2010
How would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
View 7 Replies
View Related
Dec 28, 2010
When ever I try to save a scanned image with Xsane i get the following message:
Child process error
failed to execute OCR command: gocr
No such file or directory.
I have tried several different directories and file names with the same resut.
View 3 Replies
View Related
Jan 26, 2010
Got a problem here with my xsane scanner. my printer is HP Officejet 6500 wireless. when i run xsane when i have a document to scan it says error: failed to open device 'hpaio:net/officejet_6500_E7009n?ip192.168.1.20':error during device I/O.howcan i use again my scanner?
View 4 Replies
View Related
Jan 29, 2010
I have the 64 bit 13.0 version installed. I have an hp f4440 all-in-one printer installed and connected via usb. I downloaded and installed the new hplip 3.9.12 after removing the older hplip 3.9.4 version. I used CUPS to install and setup the printer. No problems, I let it search and it found the printer right away. When I ran XSane it could not find the device. I clicked help and it gave some steps. The first being to try as root. I opened a root terminal and entered xsane, it found and opened after a warning about running it as root. I checked and my user name and root are entered in the scan group.
View 5 Replies
View Related
Jun 10, 2011
I recently installed 11.4 32bits, and got everything working, including my Canon Lide25 Scanner with XSane. It suddenly stopped working, not seing the device anymore; I suspect it happened after installing VirtualBox, butreally not sure of that.
Basically, as root I can launch Xsane and scan, and Yast also sees the Scanner and the test is succesful, so a permission issue I believe.As I don't know exactly when/why this happened, does anyone know how I could troubleshoot ? Check for UDEV rules or so ? a group I should be in ? I don't know where to start and don't want to fiddle around and break something
lsusb gives : Bus 002 Device 009: ID 04a9:2220 Canon, Inc. CanoScan LIDE 25
View 2 Replies
View Related
Jan 11, 2010
I can't figure out how to specify a particular scan size in xsane. The only place I can find to change size is in preview, where there is a drop down list of choices including letter port. How do I specify an arbitrary size in inches?
Running Ubuntu 9.10
View 2 Replies
View Related
Feb 12, 2010
I use XSane a lot and have been eliminating tons of paper from my office..Sometimes I have to scan a legal size page. I then save as a pdf file. That pdf file shows blank pages in acroread but works in Document Viewer. Can I modify the PDF file so that acroread will display it?
View 2 Replies
View Related
Apr 4, 2010
I want to reduce "Open Gimp, File>>Create>>XSane>>[my_scanner]" into a command-line ... line of command. XD So I can bind it to a key combo with Compiz-config. I just don't know how to find the commands to make Gimp and XSane do that.
View 2 Replies
View Related
May 16, 2010
I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:
Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with
[Code].....
View 4 Replies
View Related
Oct 4, 2010
With Lucid I was capable of scanning both with my Epson Perfection 640 U scanner and with my HP-M1120n-MFP network scanner. To get the HP-M1120n to work I had to rename a file which I do not remenber which was. I do not remember where I found the instructions. I am running HPLIP 3.10.6 with Device Manager 15.0. I did a fresh install of Maverick Beta and I am not able to neither scan with the Epson Perfection scanner nor with the M1120n-MFP. As said, both worked with Lucid. As said I had to rename a file to get the MFP scanner to work. I include screen shots to this post.
View 8 Replies
View Related
Dec 2, 2010
The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)
View 2 Replies
View Related
