Ubuntu :: Cannot Get Scanners To Work In Maverick With Xsane
Oct 4, 2010
With Lucid I was capable of scanning both with my Epson Perfection 640 U scanner and with my HP-M1120n-MFP network scanner. To get the HP-M1120n to work I had to rename a file which I do not remenber which was. I do not remember where I found the instructions. I am running HPLIP 3.10.6 with Device Manager 15.0. I did a fresh install of Maverick Beta and I am not able to neither scan with the Epson Perfection scanner nor with the M1120n-MFP. As said, both worked with Lucid. As said I had to rename a file to get the MFP scanner to work. I include screen shots to this post.
View 8 Replies
ADVERTISEMENT
Mar 22, 2010
This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
View 2 Replies
View Related
Dec 18, 2009
HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.
I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?
View 5 Replies
View Related
Mar 21, 2010
After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.
View 1 Replies
View Related
Apr 21, 2011
I've been using Ubuntu 10.10 for the past couple of months now and I thoroughly enjoy it, but I've seem to eventually come over a problem. I'm on vacation and want to transfer pictures from my camera to my computer. I have a Micro SD adapter (2 GB) that I've tried to put into my SD slot on my computer, but it seems that Ubuntu doesn't recognize it (gotten a bit used to plug & play laziness, I guess). Does anyone know how to make Ubuntu recognize the memory card?
View 6 Replies
View Related
Oct 10, 2010
before I install fglrx 10.9 on a fresh install of Ubuntu, I was wondering which installation method works best, via ATI's website or the repositories?
View 2 Replies
View Related
Jan 8, 2010
I'm about to start a project which will take 12 to 18 months to complete. A major part of the project is the use of a scanner in fact it cannot proceed without scanner use. I have two scanners a Canon lide30 and a Medion N11652 with the ability to scan 35mm photographic slides. Xsane does not recognise either of them. From what I've been reading Ubuntu supports only a few scanners. I've recently purchased a professional photographic printer. While searching for a suitable printer I noted printers are not stand alone units these days. The units are multifunction the computer stores have row upon row of different brands and no stand alone printers. I feel sure these multifunction unit scanning abilities are enabled and used by linux users out there.
View 4 Replies
View Related
Oct 15, 2010
I just had the idea of going back to command line music players and mp3blaster is what that came to my mind. I am running Kubuntu 10.10 on a Thinkpad T43 laptop with the default kernel. In an archived thread I read
mp3blaster -s /dev/dsp
would do the trick. But since all sound devices in my current laptop seem to be listed under /dev/snd as pcmC0D0p etc. I tried using,
mp3blaster -s /dev/snd/pcmC0D0p
and this gave a sound device control error.
Just did some digging around and saw that I didn't have any oss modules running. Are they the culprits? If not how would I make mp3blaster use my current devices else do I need to reconfigure my kernel to have the oss modules?
View 9 Replies
View Related
Oct 12, 2010
I upgraded from 10.04 to 10.10 Worked fined, but suspend doesn't work anymore. When I click suspend, a tty1 terminal screen appears, exactly as you would hit ctrl+alt+F1, with the exception that no input is possible. I'm a newbie and an Ubuntu fan but I absolutely have no idea how to solve this...
View 5 Replies
View Related
Dec 15, 2010
This is an eternal problem with radio-canada streaming content, and it seems every new version of ubuntu we have to go through different processes to get it to work.In some previous versions, following the guidelines provided by radio-canada worked, but they are quite outdated now and some of the packages they refered to do not even exist anymore. I make regular reports of their website, but users complaining only end up by, if they answer at all "it works on our computers so it should work on yours" or "why don't you use windows".
Basically, their guides consist of removing the totem totem plugin, installing flash-plugin-nonfree and the mplayer plugin.I read somewhere the mplayer plugin is now gecko-mediaplayer, which I installed, but the videos still don't work.
View 5 Replies
View Related
Mar 11, 2011
I have made a custom kernel a few weeks ago, and just today the sound on everything isn't working. Upgraded alsa to 1.0.24 to try to fix and nothing... What do I need to do?
View 2 Replies
View Related
Oct 20, 2010
I just upgraded to 10.10 version (32 bit) and istalled gmameui along with mame. Although when i try to run gmameui preferences the program crashes, it recognizes the roms and am able to play so it doesnt really bother me. The problem is that joystick works but not properly despite jscal calibration .My joystick is recognized as js0. I reinstalled "joystick" package but the problem persists
View 2 Replies
View Related
Jan 14, 2011
Now it seems as though all of my printers and my scanners have disappeared, also thunderbird will not open anymore. I find this very strange.. I can't even think of why this would happen.--When I start thunderbird it says starting thunderbird then does nothing.. if I try to start it again it says that it's already running.. which it is not..I have all of my updates updated.. You are using Ubuntu 11.04 - the Natty Narwhal - released in April 2011 and supported until October 2012.
View 3 Replies
View Related
Aug 26, 2010
I've had fail2ban setup for awhile for my SSH server, and that works beautifully (I had someone I knew attempt to access it and get banned) however I then tried to set it up to ban people scanning my webserver for lots of other pages which dont exist (and have never been linked to) such as phpMyAdmin.
In my jail.conf I have:
Code:
However Looking at this I realise I need to edit the filter.d/apache-error.conf
I'm not sure exactly how to setup the regex to ban the correct hosts
The errors from the scanners are like this:
Code:
View 1 Replies
View Related
Jan 6, 2011
I'm planning to setup an FTP folder which will be public facing, this will mostly be Windows document (e.g .doc files, .exe files etc) I do not want my folder to have any Windows based viruses (or linux ones for that matter), thus I need a way to prevent infected files being distributed via my FTP. Can anyone recommend a linux virus scanner which will remove windows viruses.
View 1 Replies
View Related
May 13, 2011
This is deja vue but I'm stuck again with an EPSON Perfection 4180 scanner. This is one of those scanners that is supported by the epkowa sane drivers and requires specific firmware.
The SBo packages
iscan-firmware
iscan-free
iscan-proprietary-drivers
Should make this scanner usable in slackware. I had this working on a slackware 13.1 (32 bit), now I am trying to get it going in slackware64 13.37.
The scanner is detected by sane-find-scanner:
Code:
And somewhat by scanimage -L:
Code:
However this fails to recognize the scanner model (which was ok in 13.1 32 bit) and then it also fails to work with scanning anything (scanimage, or xsane abort and the scanner never makes any noise).
I'm suspecting that there is some problem with the library contained in iscan-proprietary-drivers.
View 2 Replies
View Related
Jun 21, 2010
I'm having a little trouble with ClamAV. Everytime someone sends me an email I get this error in my Webmin Mail Log. Now the mail works and it goes to the quarantine or to the user mail box but this error fills up my mail log and I'm assuming it is not using ClamAV virus definitions to scan the mail? How would I get rid of this error?
I checked in my /etc/clamd.conf and I have AllowSupplementaryGroups yes. What can be causing this error?
I am using ClamAV 0.96.1
Spamassassin 3.3.12
PostFix 2.3.3
CentOS 5.5
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) ask_av (ClamAV-clamd) FAILED - unexpected result: /var/amavisd/tmp/amavis-20100621T090618-10714/parts:
lstat() failed: Permission denied. ERROR
Jun 21 09:57:53 localhost amavis[10714]: (10714-03) WARN: all primary virus scanners failed, considering backups
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) SPAM, <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Yes, hits=20.638 tag=6 tag2=7 kill=7
tests=DKIM_ADSP_CUSTOM_MED=0.001, DRUGS_ERECTILE=2.221, FORGED_YAHOO_RCVD=1.022, FREEMAIL_ENVFROM_END_DIGIT=2.223, FREEMAIL_FROM=0.001,
FREEMAIL_REPLYTO=2.775, FREEMAIL_REPLYTO_END_DIGIT=0.98, FSL_HELO_NON_FQDN_1=0.001, HELO_NO_DOMAIN=0.001, INVALID_DATE=0.432, MISSING_MID=0.14,
NML_ADSP_CUSTOM_MED=1.2, RCVD_IN_BRBL_LASTEXT=1.644, RCVD_IN_BSRN=2.5, RCVD_IN_RELAYS_ORDB=3, RDNS_NONE=1.274, TVD_RCVD_SINGLE=1.213,
T_TO_NO_BRKTS_FREEMAIL=0.01, quarantine spam-9665 (maia-spam-quarantine)
Jun 21 09:58:01 localhost amavis[10714]: (10714-03) Blocked SPAM, [212.96.9.34] [212.96.9.34] <lovelovedsert12@yahoo.com> -> <acruel@email.com>, Hits: 20.638, 8508ms
View 2 Replies
View Related
Oct 17, 2010
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies
View Related
Sep 2, 2010
2.6.33.8-149.fc13.i686
When I was running FC10 my scanner just plugged in and worked. I must have lost something.
lsusb returns:
dmesg sees it. sane-find-scanner says:
scanimage -L returns:
And of course xsane/gimp say Not Avail. I've made sure all the (yum) sane sw is loaded and updated.
View 2 Replies
View Related
Aug 11, 2010
I have HP Scanjet 3770. UBUNTU 10.04 installed on my desktop. HPLIP also installed. This scanjet working well in Windows Xp but in ubuntu SimpleScan does not recognize it.
It shows:- No scanners detected Please check your scanner is connected and powered on.
I Also visited [url] & found as below-
ScanJet 3770 Unsupported. While an external binary-only backend exists, it works only on Linux i386. Therefore the scanner is unsupported on other platforms.
View 2 Replies
View Related
Sep 30, 2010
I have nine barcode scanners, each of whose input I want to send to a separate instantiation of a program I wrote. Each device shows up as /dev/hidraw_ (I'm using Ubuntu 10.4). The problem is that they all act as simple keyboard input, and I can't seem to redirect the output from one to a specific instance of my program. I've tried something like cat /dev/hidraw5 > ./myapp, and that doesn't work. I've tried actually opening the device in my program using open("/dev/hidraw5"), and it returns success, but subsequent reads don't do anything, and the scanner output is just printed to the console.
View 1 Replies
View Related
Oct 20, 2010
yesterday I upgraded of my ubuntu release from 10.04 to 10.10 and now, when I plug my mp3 creative zen player it doesn't work.The same player works very well with 10.04 and I can upload my mp3s directly from rythmnbox using drag&drop.Here my /var/log/syslog
Code:
Oct 20 15:58:20 tarini-laptop kernel: [25042.100344] hub 4-0:1.0: unable to enumerate USB device on port 2
Oct 20 15:58:38 tarini-laptop kernel: [25059.970030] usb 1-1: new high speed USB device using ehci_hcd and address 16
Oct 20 15:58:38 tarini-laptop kernel: [25060.102634] usb 1-1: device descriptor read/64, error -71[code].....
View 1 Replies
View Related
Jan 7, 2010
I want to send a fax using xsane image scanning program.I've captured the image of the document I want to fax , but I just don't see any option to fax it.
View 1 Replies
View Related
Mar 4, 2010
I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.
I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.
Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.
The printing side of things works fine but I can't get the scanner recognized by Xsane.......
View 5 Replies
View Related
Sep 1, 2010
How would I change the permissions for a specific program(xsane)? For some reason Xsane only works now if I run as root. It was working fine before the latest kernel update, now I get "cannot start scanner: invalid argument" unless I run the program as root. Also images that are scanned are nor accessible unless I am root
Epson Stylus NX215
Ubuntu 10.04 64 bit
The printing feature works fine still.
Iscan is installed from avasys.jp
Rolled back to old kernel and problem still exists
View 7 Replies
View Related
Dec 28, 2010
When ever I try to save a scanned image with Xsane i get the following message:
Child process error
failed to execute OCR command: gocr
No such file or directory.
I have tried several different directories and file names with the same resut.
View 3 Replies
View Related
Jan 11, 2010
I can't figure out how to specify a particular scan size in xsane. The only place I can find to change size is in preview, where there is a drop down list of choices including letter port. How do I specify an arbitrary size in inches?
Running Ubuntu 9.10
View 2 Replies
View Related
Feb 12, 2010
I use XSane a lot and have been eliminating tons of paper from my office..Sometimes I have to scan a legal size page. I then save as a pdf file. That pdf file shows blank pages in acroread but works in Document Viewer. Can I modify the PDF file so that acroread will display it?
View 2 Replies
View Related
Apr 4, 2010
I want to reduce "Open Gimp, File>>Create>>XSane>>[my_scanner]" into a command-line ... line of command. XD So I can bind it to a key combo with Compiz-config. I just don't know how to find the commands to make Gimp and XSane do that.
View 2 Replies
View Related
May 16, 2010
I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:
Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with
[Code].....
View 4 Replies
View Related
