Ubuntu :: New Scanner Not Recognized By Xsane / Sort It?

Dec 2, 2010

The scanner is seen using lsusb command but when i open xsane it is not recognized. Xsane wants to use the webcam instead. I think this happened because i saved the settings of the former scanner a few days ago. Should i delete that setting that is saved in the home>.sane>.xsane directory? The old scanner is a Canon Canoscan lide N1220U and the new one is a Canon Canoscan lide 100. I would appreciate any suggestions as i tried a reboot with no improvement :0)

View 2 Replies


ADVERTISEMENT

Ubuntu :: Can't Get The Scanner Recognized By Xsane ?

Mar 4, 2010

I've been using Ubuntu 9.10 'in anger' for a couple of weeks now and overall I'm impressed. However, a couple of days ago my old Epson C46 (which had been working fine under Karmic) died, and I had a look for a replacement.

I decided on a Canon MP270 because Canon seemed to have gone to the trouble of providing Linux drivers on their website. I even phoned Canon and they confirmed it should work fine.

Today the AIO arrived and I downloaded the printer and scanner drivers from Canon. I could't get the install.sh files to run - tried ./ sudo and sh etc, no joy. Anyway, I used the package manager to install the .deb files and that seemed to go OK.

The printing side of things works fine but I can't get the scanner recognized by Xsane.......

View 5 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

Ubuntu :: XSane Image Scanner Won't Recognize Scanner?

Sep 7, 2010

I've installed XSane Image Scanner. When I first opened it, it searched for my scanner and didn't give any error messages, and it had my scanner model in the heading of the scan window. But when I hit the scan button, it gave me saying, "Failed to start scanner: error during device I/O.I closed everything, and opened XSane again. This time it said there was no scanner available. The scanner is plugged into the USB port and uses that for both power and data. It's a Canoscan Model N650U.

View 9 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu Installation :: Xsane Can't Find Scanner?

May 16, 2010

I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:

Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with

[Code].....

View 4 Replies View Related

Ubuntu :: Stop Scanner Launching Xsane?

Dec 12, 2010

Whenever I switch on my scanner (Epson V200) then it launches Xsane automatically.
Now I know Xsane is wonderful, but often I want to use Epson's iscan instead, and for other users I prefer Simple Scan. Another thread would be a good place to discuss the reasons.

So I would like to stop my scanner launching anything when switched on.

View 1 Replies View Related

Ubuntu :: Scanner Not Detected By Xsane But Video Card Is?

May 7, 2010

Using xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.

View 1 Replies View Related

Ubuntu :: Xsane Image Scanner Freezes While Scanning?

Nov 19, 2010

I have a Fujitsu ScanPartner 93GX scanner that freezes Xsane when I try to use it. The same thing happens to Simple Scan too.

When use sane-find-scanner I get the following:

Code:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
found SCSI scanner "FUJITSU M3093GX 02" at /dev/sg0

[Code].....

I started to think I might need a different driver. I found a driver (sane-fujitsu.5) at mangpages (link), but there are no instructions as to what directory to place it in, what files need to be modified to point to it, etc.

View 3 Replies View Related

Ubuntu :: Get XSane To Recognize Ethernet Attached Scanner/printer?

Jan 30, 2011

I have a Brother mfc-8890dw that is attached to my local area network.I can ping the static ip address of the printer and receive a reply. I can print from all applications.I cannot scan. I did modify the rules files but that only appears pertinent for usb attached devices. What do I need to do to get XSane to recognize my Ethernet attached scanner/printer?

View 2 Replies View Related

Fedora Hardware :: SCSI Scanner Not Detected By XSane?

Mar 11, 2011

I've got a SCSI scanner that is being detected by the kernel on Fedora 14, but XSane does not see it. If I run "sane-find-scanner" it says that noSCSI or USB scanners are found.The scanner is a Cacham Splendeur 3024, model VM3552. I believe this scanner is the same as the Relisys Scorpio VM3552. In /var/log/messages, the following entries show up as soon as the scanner is warmed up:

Code:
Mar 11 13:34:45 dt kernel: [22595.116042] usb 4-2: new full speed USB device using uhci_hcd and address 41

[code]...

View 4 Replies View Related

General :: Xsane Is Unable To Detect Scanner Device?

Feb 3, 2010

I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.

View 2 Replies View Related

Fedora Hardware :: Epson CX5600 Scanner Xsane - No Devices Available?

Aug 4, 2010

The printer of my multi Epson CX5600 works fine, but when I run xsane I get the "No devices available" window. I tried running it as root with the same result. I have installed "iscan-firmware-2.1.1-1.fc12 (noarch) but it still wont work.h kernel 2.6.33.6-147.fc13.i686.

View 6 Replies View Related

Hardware :: Cannot Get Xsane Image Scanner To Work With HP5610 All In One / What Is Error All About?

Dec 18, 2009

HP 5610 all in one device scanner settings please. The printer works fine, I have a problem getting the Scanner to work.

I am running Ubuntu Karmic on my Dual Core Desktop PC. When I run Xsane I get the preview window showing OfficeJet 5600 Series. I also get another little error window saying "Error during CMS conversion:Could not open Scanner ICM profile". It seems like Xsane recognises my HP 5610 All in One Printer/Scanner/Fax/Copier device but what is the error all about?

View 5 Replies View Related

Slackware :: Xsane Does Not Find Scanner And Libusb Permission Error?

Oct 25, 2010

I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:


Code:
bash-4.1$ sane-find-scanner
...

[code]...

View 2 Replies View Related

Ubuntu Multimedia :: Epson DX8400 Scanner Driver With 9.10 - When Run XSane - Replies - There Is No Available Device

Jan 15, 2010

Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.

But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...

View 5 Replies View Related

Debian Hardware :: Make Lexmark S305 Scanner (wifi) Work With Xsane?

Mar 21, 2010

After I solved the issue about printer, now I'm struggling to make the integrated scanner of lexmark S305 work with debian.The device is connected to the network through integrated wifi connection (it is NOT connected with usb to a host, which act as a server), but I don't know how xsane can recognize it.I have just added the ip address in /etc/sane.d/net.conf, but it doesn't work at all. I read some tutorials on how to configure a network scanner, but they are all related to a scanner connected to a computer through usb, and then shared on the network by this computer.The second issue (probably more important) is that xsane probably doesn't recognize even with usb connection the scanner. The latter is not listed in the supported scanner list. Indeed connecting by usb to my laptop, it doesn't work. I haven't found any driver for it, but probably it could work with driver of other scanners.

View 1 Replies View Related

Ubuntu :: Epson Perfection V330 Photo Not Recognized By XSane And Simple Scan

Jan 13, 2011

I just got an Epson Perfection V330 Photo scanner.After connecting it to Ubuntu 10.04, it's not recognized by XSane and Simple Scan.The relevant lsusb output:Bus 001 Device 008: ID 04b8:0142 Seiko Epson Corp.Google does not yet know "04b8:0142",.

View 5 Replies View Related

Hardware :: Xsane Networked Scanner Returns "invalid Argument"?

Apr 12, 2011

I am having trouble getting my HP 6310 All-In-One scanner working using it on its ethernet interface, set to 192.168.1.208. Installed fine under cups for printing. hplib installed. I do the following.~ $ hp-makeuri 192.168.1.208HP Linux Imaging and Printing System (ver. 3.9.4b)Device URI Creation Utility ver. 5.0Copyright (c) 2001-9 Hewlett-Packard Development Company, LPThis software comes with ABSOLUTELY NO WARRANTY.This is free software, and you are welcome to distribute itunder certain conditions. See COPYING file for more details.

CUPS URI: hp:/net/Officejet_6300_series?ip=192.168.1.208
SANE URI: hpaio:/net/Officejet_6300_series?ip=192.168.1.208
HP Fax URI: hpfax:/net/Officejet_6300_series?ip=192.168.1.208

[code]...

View 2 Replies View Related

Ubuntu :: HP 2050 Printer With Scanner - Not Recognized

Mar 27, 2011

I have just bought and installed an HP 2050 printer-scanner-copier. The printer works fine, but the scanner is not recognised by Simple Scan or XSane.

Simple Scan states: No Scanners Detected

XSane Image Scanning Program states: No Devices Available

I have Ubuntu 10.10 - the Maverick Meercat installed on my computer.

I have downloaded the hplip-3.11.3a.run file from the HP website but it is still in my download folder and I don't know how to get it from the download folder to my computer and then once that is accomplished, I don't know what to type in the terminal to get this file installed.

Heck, I don't even know if this is what I should install to correct this problem or not.

View 4 Replies View Related

OpenSUSE :: Scanner Won't Work / Sort It?

Aug 6, 2010

I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?

View 3 Replies View Related

Debian :: Scanner No Longer Recognized After Update

Nov 30, 2015

I am running Wheezy 7.9 32 bit, with the kernel Linux 3.2.0-4-686-pae, and Gnome 3.4.2 on an Intel Pentium CPU G3420 @ 3.2 GHz. I installed a new printer in August, an HP Officejet 7612 all-in-one printer/scanner/copier, and it worked perfectly as both a printer and a scanner first time, despite not being listed on the supported list in SANE. Two weeks ago, I got a general software update notification, and did the update. Now the scanner is not recognised. The printer still works fine as a printer, but when using Simple-scan, I get the error message "No scanners detected. Please check your scanner is connected and powered on". I have had a look round on Google, and all the suggestions made do not work.

I tried the suggestion to add myself to the scanner users list on my PC which made no difference (even though the scanner previously worked without my being added to the scanner users list).

I have deleted the printer and re-installed it using CUPS, but that still has no effect. I tried re-installing HPLIP also to no avail, and I have now lost the toolbox on the drop down menu under <Applications> <Accessories> <HP Toolbox>, as when I click on it, nothing happens.

It would seem that something in the update has messed up Simple-scan. Looking at the dpkg log (is this the right thing to look at?) for the date of the update, I cannot find anything which directly involved SANE, so I think that it might be something else which has affected SANE. How I can find out which update did the damage? I don't normally do anything except accept recommended updates, so I am a bit lost as to what to do.

View 2 Replies View Related

Fedora Hardware :: HP All In One Scanner - Unable To Get Recognized

Jan 4, 2011

I have purchased an HP 2050 all in one Printer Scanner. The Printer works fine but so far I am unable to get the scanner recognized.

View 14 Replies View Related

OpenSUSE Hardware :: Bearpaw Scanner Not Recognized?

Nov 15, 2010

I have a Bearpaw 1200CU scanner that is not recognized by Yast, so I cannot use XSane to scan my images. Is there anyway to get the driver?

View 2 Replies View Related

Hardware :: Brother Scanner Not Being Recognized In Fedora 11?

Oct 15, 2009

I have a Brother MFC-7345 Printer/Scanner and I got the printer working but the scanner won't work. I've installed all the drivers from Brother and followed all their instructions but still nothing. sane-find-scanner gives me

# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

and scanimage -L gives me No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Slackware :: Scanner Not Recognized On Epson Workforce 633 With 13.37 32-bit?

May 17, 2011

I had a similar problem on 13.1, but was solved by this forum by copying 80-sane.rules to /etc/udev/rules.d/ . With 13.37 the same trick doesn't work. Here is my scanimage output:

Code:

root@Shuttle:/home/tfrei# scanimage -L

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Here is my sane-find-scanner output:

Code:

root@Shuttle:/home/tfrei# sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

[code]....

View 6 Replies View Related

Hardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?

Jul 20, 2009

Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+

View 11 Replies View Related

Hardware :: Multi Function Printer Scanner Not Recognized?

Jul 19, 2011

Using Ubuntu 11.04 with my Brother MFC-295cn network printer (not wireless). Printer prints, but scanner not recognized. Downloaded the following drivers and installed them using the Software Center:

mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2..i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb

Computer is a Gateway GT5464 dual booted with Windows 7

View 1 Replies View Related

Fedora :: Installed Xsane With Xsane-gimp But Its Not Starting

Mar 22, 2010

This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console

Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory

View 2 Replies View Related

Installation :: Previous Ubuntu Version In Grub Not Recognized In Synaptic / Sort It?

Apr 6, 2011

I recently got my Dell XPS 17 and configured it to do dual boot into Win 7 and Maverick. Apparently, Maverick does not play nice with the newer hardware in this laptop so I decided to upgrade to Natty Beta. All has gone fine except for one little thing. When bootting Grub shows my WIn7 and Natty options but it also shows an option to use the older ubuntu version. It does not actually work as it stops receiving input at the user selection screen. I can't remove the image as it does not show up in synpatic nor is the package found when using the apt-get remove [linux image version] command.

I searched the forums and found that this guy:
http://ubuntuforums.org/archive/inde...t-1489362.html

was having the exact same problem as me and had tried exactly the same things as I have, and I still don't know how to remove those old files. I don't even know where these config files could be so that I can manually go in and remove them. I could live with the option in the Grub but I'm kind of a tidy freak and it annoys me to have a non-functional booting option taking up space.

Is it correct for me to think that a clean reinstall of natty would purge that ghost from the Grub? Also, how easy is this process and can the process mess up the MBR and not be able to do the dual-boot?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved