Slackware ::When Ran XSane It Could Not Find The Device?
Jan 29, 2010
I have the 64 bit 13.0 version installed. I have an hp f4440 all-in-one printer installed and connected via usb. I downloaded and installed the new hplip 3.9.12 after removing the older hplip 3.9.4 version. I used CUPS to install and setup the printer. No problems, I let it search and it found the printer right away. When I ran XSane it could not find the device. I clicked help and it gave some steps. The first being to try as root. I opened a root terminal and entered xsane, it found and opened after a warning about running it as root. I checked and my user name and root are entered in the scan group.
View 5 Replies
ADVERTISEMENT
Oct 25, 2010
I am tired, and I simply can't find an easy answer.So, today I need the scanner in slackware64 13.1, only to find that it does not work as user. I have an HP Deskjet F2180 and using CUPS it is identified as hp:/usb/Deskjet_F2100_series?serial=CN81H4S2SP04TK.In the past the simple solution was to add oneself to the right groups, but it does not work this time.As user I get:
Code:
bash-4.1$ sane-find-scanner
...
[code]...
View 2 Replies
View Related
Feb 3, 2010
I'm using debian lenny, I bought a new Hp officejet j4500 scanner but the xsane is unable to detect the scanner. It says device not found. If I run xsane as root it detects and works properly it is obvious.I have added the user to scanner,saned and also to root user group.
View 2 Replies
View Related
May 1, 2010
The one thing that has stopped me switching over to Ubuntu was getting my scanner to work. I finally resolved this issue. Here are the set I followed to get it working. When trying to scan with XSane I would get the device not found alert. Using the sane-find-scanner command would find the scanner as a USB device. found USB scanner (vendor=0x04b8, product=0x0851) at libusb:001:006 I amended the "rules" file for xsane /lib/udev/rules.d/40-libsane.rules added the two following lines
[code]...
Now I have a fully working colour scanner, bye bye windows
View 6 Replies
View Related
Mar 29, 2010
Recently xsane has stopped detecting my MFP (HP Deskjet F2280). My setup has not had any hardware changes and the only software changes in that time have been the periodic Synaptic updates. Before this hiccup all had been well for over a year. If I run xsane it thinks a while (10 sec?) and tells me in a little panel no devices were detected. If I run lsusb, it finds the device, but after all it is a printer/scanner and the printing function continues to be OK so this is not a surprise.
I do not know enough to understand all the lsusb output to know if anything is amiss in the detail. What is it that xsane needs so that it detects the device as a scanner? Is there a file or specific stuff in a file which I could get from an old backup or edit (carefully!) by hand? I don't need the scanning function often enough to pin down what might have done the mischief.
View 2 Replies
View Related
Jan 15, 2010
Ok, installing the Epson DX8400 printer driver was easy... I just turned it on, and Ubuntu searched and installed the printer itself.
But scanning... that's another story. In Ubuntu 9.04 the trick was as simple as installing libsane-extras in Synaptic, but this doesn't work in Ubuntu 9.10! When I try to run XSane, it simply replies that there is no available device...
View 5 Replies
View Related
May 16, 2010
I cant find my scanner (Canon MP250). I have installed the printer and it works fine, this using the drivers from canon (canon divers page) and installed the scanner drivers too. Im running:
Code:
$ uname -a
Linux ubuntu 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 x86_64 GNU/Linux
Installed the drivers with
[Code].....
View 4 Replies
View Related
Mar 22, 2010
This is something weird, I installed Xsane with Xsane-gimp but its not starting. It shows its doing something but it simply quits. Here is the error that I get while starting it from console
Code:
xsane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
View 2 Replies
View Related
May 22, 2010
I dont know when k3b stopped working but have just gone to burn a disk and when opening it tells me
Quote: No optical drive found. K3b did not find any optical device in your system. Solution: Make sure HAL daemon is running, it is used by K3b for finding devices.
I can boot from cd and can mount cds from within Slackware but for some reason k3b insists that i don't have a drive.
View 8 Replies
View Related
May 15, 2011
Recently, I created a device sc0 through device mapper. The divice could be found in /dev/mapper/sc0. My problem is that the device doesn't exist in /dev/partitions which will block my following test.BTW, I found dm-0 in /dev/partitions. Is it the same as /dev/mapper/sc0? But the device /dev/dm-0 doesn't exist!
View 2 Replies
View Related
Aug 23, 2011
I've bought an X10 Home Automation USB interface: the CM15.
This is the information lsusb gives:
skerit@KIP-DU-SKER:~$ lsusb Bus 008 Device 002: ID 0bc7:0001 X10 Wireless Technology, Inc. ActiveHome (ACPI-compliant)
But this tells me nothing about where the device file is! How can I find that, or create one myself?
View 1 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
Mar 17, 2011
I just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
View 10 Replies
View Related
Aug 24, 2010
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies
View Related
Jun 5, 2010
I have a Canoscan LiDE 30 scanner which works fine in Linux. I haven't used it in months, and never since moving from Jaunty x86_64 to Fedora 11 x86_64. This evening I suddenly need to scan two pages to send to someone via e-mail, and the recipient is desperate to receive them. Naturally, Xsane has decided this is the moment to screw me.
The problem: I cannot figure out how to tell Xsane that the page size is 8.5 11. It insists on scanning only the left side, 3.99 x 11. I cannot find a page size anywhere in any of the buttons.
In Preview I once got it to scan the entire page, but could not figure out how to save the image to file. Subsequently I have not been able to figure out how I did it. In any event, scanning from the small main window always scans 3.99 x 11. Adjusting the scan area manually in the Preview window allows me to change the size area in the small main window to 8.5 x 11, but when I then scan from the small main window it reverts to 3.99 x 11.
I have scanned the document a hundred times at least, each time trying different buttons, but nothing has succeeded in getting the full page.
View 5 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Oct 19, 2009
Now i have 64 bit computer i installed Slackware 23 64 bit on it. i followed Alien Bob's multi lib how to and installed needed libraries one by one. everything is fine expect wine configure script can not find some libraries needed: libgsm, libmpg123, libopenal, libxcomposite.
I have already installed 32 bit compatibility packages and used /etc/profile.d/32bit.sh as recommended in Alien Bob's howto. configure -- does not really list anything for pointing for libraries.
View 14 Replies
View Related
Jan 30, 2010
i tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
View 2 Replies
View Related
Feb 11, 2010
I've been trying to configure my tablet's screen rotation. I can get the screen to rotate, but not the wacom rotation.
Code:
$ xsetwacom set "STYLUS" Rotate ccw
Cannot find device 'STYLUS'.
[code]...
View 2 Replies
View Related
May 23, 2011
How can I find which /dev/? device to mount my USB hard drive on redhat 3 taroon, I've been googling a lot and checked log files and still no clue. I'm trying my last chance with you experts, # /sbin/fdisk -lgives nothing about the USB drive
# lsusb -vv
Bus 004 Device 005: ID 059f:0951 LaCie, Ltd
Device Descriptor:
[code]....
View 4 Replies
View Related
Jul 11, 2011
I have a microphone that I connected via USB. When I do dmesg it shows [37830.040274] usb 5-1: new full speed USB device using uhci_hcd and address 4 How do I find out what /dev/??? identifier has been associated with the device? I want to record something using XVidCap and need to set the microphone for it to work.
View 5 Replies
View Related
Jul 28, 2011
What command do I need to use to find the device name of drives , in particular an inserted USB drive that is not mounted yet ?Everywhere I search tell me to do this:
Code:
tail -f /var/log/messages
But that file doesn't exist
View 3 Replies
View Related
Sep 1, 2010
what would be the simplest way to find out device IP address? I don't know its factory set address, so my plan is to connect laptop directly to it with ethernet. it should respond to ping.
View 7 Replies
View Related
Jan 17, 2011
out in finding root device of fedora 14. I've windows XP and fedora 14 installed on. this is the output for blkid
/dev/sda1: UUID="962C8EA82C8E834B" TYPE="ntfs"
/dev/sda5: UUID="262C06BF2C068A4F" TYPE="ntfs"
/dev/sda6: UUID="cbcf539a-dee1-4f2f-b68c-ce315ae76e0f" TYPE="ext4"
[code]...
View 2 Replies
View Related
Apr 27, 2011
There are so many system information tools i figure that this one would be in the set. I just can't seen to find it.
View 9 Replies
View Related
Feb 24, 2010
I had grub trouble with a hardware change and have been trying to solve this. I think I have done more harm then good. I can not boot into Ubuntu or Windows 7. Here is the boot info script and other info on my problem. Can someone please help me with this,
Code:
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
ubuntu@ubuntu:~$ sudo os-prober
/dev/sda1:Windows 7 (loader):Windows:chain
[Code]....
View 9 Replies
View Related
Jan 16, 2011
I have this software I want to use to extract data from a Polar heart rate monitor. Everything related to sound is working flawlessly. I just need to know the device name of the front microphone ("microphone" 2" in sound properties) so that I can insert it in the following cli command for a script: "rs200_decode -m /dev/XXX -b -o /home/user/dumb.bin"
I checked the forums but I only see references to /dev/dsp, /dev/audio, etc. I don't have any of those but rather /dev/snd/controlC0, hwC0D2, pcmC0D0c, pcmC0D0p, pcmC0D1p and pcmC0D2c.
I'm using Ubuntu 10.10 32-bit. The sound card is a generic HDA Intel audio chip. Lspci outputs: Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller.
View 1 Replies
View Related
Apr 9, 2011
How do I find the device that a usb stick is tied to (eg. /dev/sdc)
View 3 Replies
View Related
Jan 20, 2011
I am using Cron for nightly backups to a usb device. I was just wondering in my script for the backup, how do I find the location of my usb device.
View 2 Replies
View Related
May 19, 2011
I have a usb to serial converter which i plug in to Ubuntu Natty.I see that on every reboot this seems to come up as a different device name, say ttyUSB0, ttyUSB3 etc.I want to write a simple shell script to get the name of the device in a shellscript.
View 1 Replies
View Related
