Fedora Networking :: HP Photosmart C6380 - WIFI Installation On 11?
Aug 5, 2009
I bought a HP Photosmart C6380 Printer a few days ago, and i am trying to make it work on my Laptop with Fedora 11 installed on it. Like all the ither posts concerning this problem, when i connect the printer by USB it works without a problem. I can ping the printer with success and i can also access the Web interface of the Printer. So i think that the Printer is connected correctly to my WIFI network. I have tried several things.
- I have tried to install it with CUPS, selected "HP JetDirect", put in the IP-Adress of the Printer, selected the driver for 6300
series. In the URI i had something like "socket://<IP-Adress of the printer>:9100". After that tried to print a test page -> Nothing.
- I tried it with IPP, same result, nothing.
- I also tried, after having read a lot here, to put "http://<IP-Adress of the printer>". After that, i tried to print a test page, and the printer seemed to work. But what i got was a lot of crap, really unreadable things.
Quote:
POST / HTTP/1.1
Content-Length: 492
Content-Type: application/ipp
[code].....
Here i got unreadable things
- I also tried the CUPS web interface without any result.
- I also tried HPLIP. Downloaded the latest version and installed it. After installation i ran "hp-setup". I tried all the three steps, the only one that worked was step one, USB. For the rest nothing worked. I did not try the printer connected by Ethernet, but i think that this should work, because i tried an HP printer at work an that worked. I have an WIFI access point, so no ad-hoc connection. On my wife's Laptop, where Windows Vista is installed, the printer works without any problem.
View 11 Replies
ADVERTISEMENT
Dec 21, 2009
I started a thread that just brushed on the topic of running Xsane to scan with my HP c6380. However, the subject did not go very deep. It was alot about the printer, but not very much about scanning. It was also a previous installation and version of FedoraKDE. Now, I would like to take a moment to ask how to get Xsane up and running so that I can scan with my printer. I have it installed using $yum. However, the icon has not appeared anywhere and I am stumped.
View 14 Replies
View Related
Jun 15, 2010
I thought I had a post out there that thoroughly covered this topic. But, I looked and I couldn't find it.Well, I am trying to get Sane to run so I could scan documents. I have printing set up, and the cups daemon is set to run at reboot. What are the following steps to achieve my objective,
View 9 Replies
View Related
Oct 18, 2010
I installed HPLIP, CUPS, ran hp-setup, and have a scanner detected in root, but not as standard user. I had some directions given to me in this forum, and I tried to follow them, but when I went into the man page as directed by one of the terminal commands, the directions there were cryptic. No success with changing permissions for sane-find-scanner in the file where permissions are supposed to reside. Started looking around down there at a couple of files and all I saw was garbage. how to change permissions for sane-find-scanner
View 6 Replies
View Related
Aug 27, 2009
I downloaded HPLIP, and I began the install process. After 'make', it prompted me to restart. Thinking that would be good, I restarted. When I logged back in I tried to print a document, and it didn't print. I don't know what to do. I tried to follow the directions at http://hplipopensource.com/hplip-web...all/index.html, and they weren't very good. How can I tell if everything is installed for the printer? Once it is installed, how do I configure it and set it up? It is a wireless printer.
View 14 Replies
View Related
Dec 17, 2010
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies
View Related
Sep 2, 2010
I finally got around to setting up my HP Photosmart c4580 AIO printer today to print wirelessly so that I don't have to be tethered to it with a USB. I found there are many different ways of doing this, each with limited success. So I took a crack at it and this is how I got it to work. (Just an FYI, I don't think that it matters but I am running Ubuntu 10.04 64bit.) Note: I have put in screen shots of the important steps. Also, I have linked at the bottom all the relevant shots. In a terminal type
Code:
hpsetup
After pushing enter a GUI will pop open call "HP Device Manager - Setup". There are four radio buttons, I selected the "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)" one and then clicked Next.
Clicking Next opens a new window for Wifi Configuration. Read what it says (Which is; after configuration setup will continue, this configuration may not work, and connect your printer to your computer by a USB cable!) Now click "Next". Assuming you haven't forgotten to plug your printer into your computer (and turn it on) you will get a "Discovered Wireless Capable Devices" list with something on it. If you do not have anything listed under "Model" and "Device URI" check all your connections and the power to your printer and click refresh. If still nothing I am sorry but this setup has failed you, but if you are lucky and something shows up, click on it and then click next. You have to have wireless internet to continue. The step you are on now has you select your wireless internet connection. Find your's and click next.
Now in the next screen you have to enter in your password for your wireless internet, then push connect. Once you connect you have now just given me access to your online banking and I am withdrawing money as you read this! I'm probably just kidding! I just wanted to make sure I haven't lost you yet. But you do want to enter your password and push enter.
After you push connect you should get a little 'progress' screen. After that is done loading you will see a screen that looks like, Now on a piece of paper or something else, write down your hostname and your IP address. After you have done that unplug the USB from your computer and click finish. Now what happens next, I could not explain. But you remember earlier the wizard said that setup would continue after configuration? Yeah well it didn't for me. And here is what it looked like.
Notice no printers available to select, and even in the terminal it shows an error. Either way, we have the information that we need to finish things up outside of this 'hpsetup' wizard. So just click cancel, close the terminal, and go back to the desktop. Now on your desktop go to System>Administration>Printing That will open a window that shows your current printer profiles. Click the add button to get a screen that looks like this,
Click the plus sign + next to "Network Printer" then click on "Find Network Printer". Now on the right half of that window there is a text box labeled "host:", enter the IP address that you copied down earlier and click the button that says "Find". Once clicking "Find" , one of two things will happen; (1)It will recognize it right away, locate the driver and take you to this screen, after clicking "forward".
or (2) It will take you to a screen showing the host name and the port number. If that happens, no big deal, just click "forward" to get the above screen. Or (3) It will not recognize the IP address that you entered. If this is the case, type in the host name you copied down earlier and click find, then click "forward" to get to the above screen. Or (4) It will not be able to locate a suitable driver. If this last scenario plays out for you then I am sorry but I don't know what to do. So lets just hope that doesn't happen. Alright now that you are on the above screen. Type in a name that you would like your computer to call your printer.
Then click "Apply". Once you click "Apply" that window will close and it will take you back to your printer list. You should notice a new printer in your lineup. Also, it is asking you if you would like to print a test page. Before you pick one, double check that your USB cable is no longer plugged in to your computer from the printer. Now, clicked "No" or "Yes". I chose "No" because test printing takes up a lot of ink. Instead of the test page I just went to my gmail and printed an e-mail. And guess what?! It worked!
View 4 Replies
View Related
Mar 17, 2011
I recently installed a HP photosmart everything works fine but I can't get the wireless connection to work.
View 1 Replies
View Related
Feb 6, 2011
I can print with HP Photosmart Plus e-All-in-One B210a with Fedora 13, but I can't scan anything. I'm using HPLIP 3.
View 3 Replies
View Related
Feb 2, 2011
My computer recognizes the printer and has no trouble printing out any documents. The printer can scan papers to a memory card and makes copies just fine too. But when I select "Scan to PC" I get the message "Try scan from computer or see documentation. Press OK." Of course, the printer included next to no documentation, only the basic plug-it-in-and-turn-it-on instructions. Simple Scan said that it did not find a scanner.
View 8 Replies
View Related
Feb 25, 2010
Printing works fine. I've printed documents ant photos - all is ok.Build-in card-reader works well.But I can't scan with him in fedora.I've installed libsane-hpaio .
View 9 Replies
View Related
Feb 22, 2011
I got trouble to print a photo of 10x15 cm to HP Photopaper (which was delivered with the printer itself). I printed from the UI and set the size according to the papersize (both 10x15cm) and just hit print in "High Quality". The paper gets drawn in, but then the tiny LCD screen on the printer tells me - Wrong paper size, please insert a larger paper, I have to hit the Ok/Cancel button on the Printer but the effect is the same, the printer spits the empty photo paper in front of me.Does anyone have a tipp where to look at?
View 12 Replies
View Related
May 27, 2009
ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
Jul 13, 2011
I can't get wifi in my Desktop 64 installation, but I can in LiveCDs and in Windows. I have an AirLink101 wireless-n card using the Ralink RT2860 driver (which apparently is not installed in Ubuntu Desktop, but IS installed in Server. attempted modprobe rt2860sta resulted in no such luck, citing a missing server directory.) [URL].... details my struggles to get this card operating in Server. I thought I might have more luck with Desktop, but to no avail. The real question is: WHY would this card work in LiveCD but NOT in Desktop or Server installations?
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Aug 23, 2009
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies
View Related
May 29, 2010
Its been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
View 1 Replies
View Related
Nov 18, 2010
I can use Ubuntu with my onboard wireless in my IBM Lenovo Laptop but it doesn't work here and in other linux distro's I have tried I need to do a lot of code manipulation with the help of experts on the forums telling me what to do. I want to install Fedora 14 and maybe even try other Distro's as they come out without needing to be a Linux expert. So I want to go down to Best Buy a couple miles down the road and buy a USB WIFI Wireless thing.
View 5 Replies
View Related
Dec 21, 2010
i've got an IBM thinkpad 1858. fedora 11 & 12 (KDE spin) were always running without any major problems. today, i upgraded the system from f12 to f14 using preupgrade (and a wired internet connection). the upgrade process went smoothly.
but now i don't have a wifi connection anymore - there is no icon shown in the system tray and the led does not blink. the network configuration tool shows eth1 to be inactive and the button to activate it is grey.
lspci -v shows:
Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation IBM ThinkPad R50e
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at 90306000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2200
Kernel modules: ipw2200
View 5 Replies
View Related
Nov 7, 2010
My house is WiFi enabled. I am putting Live Fedora 14 to test, on my 2003 desktop pc, in the next 1 or 2 days. The first thing I would like to do with FEDORA is to hook it to my home WiFi. Where will I go on the screen, to do it?? by the time I boot I can do it with ease.
View 1 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Mar 27, 2009
I have atheros wifi chip and I got wifi through madwifi. I was using f9 and my wifi connection in very stable. Then I tried F10. It has already firmware for atheros in it kernel. It get connect through wireless network (wifi) but soon it disconnect. I updated NetworkManager but no fruitful result came. Finally again I switched to f9 and I got very stable connection. But I am missing the features of f10. I hope that the connection will be stable in f11. I tried to install f11 but it says /dev/root not found again it shows that something clock time at the time of booting and it stop booting. So finally I choose to use f9.
View 5 Replies
View Related
