Smart phone (MyTouch 3G) SD card is NOT being detected in Fedora 14 installed on Asus G73 JW-A1 laptop. Notes: SD Card, using the same cable, is detected just fine on Windows laptop and was detected on a desktop computer (that I no longer have access to) that was running Fedora 12.
View 2 RepliesOur smart card readers stopped working with Firefox and Thunderbird after upgrading from Fedora 9 to 12. When I first opened it, Thunderbird warned that the "CAC Reader (DoD Configuration Extension)" is incompatible with the current version (3.0b4) and disabled the extention. Firefox (3.5.5) just doesn't work. The module listed in Mozilla Firefox/Thunderbird [Security Devices] was "/usr/lib64/pkcs11/libcoolkeypk11.so" which is still there. To get it working in Fedora 9 I was able to run an installer from [URL]. That was before my VeriSign software certificate expired.
Now I can't even connect to forge.mil because they require a PKI cert to connect. I'm wondering how they expect someone to get a driver for their CAC reader if they need a working CAC reader to get the driver - seems like a "Catch 22" situation. I also still have the rpm's that I downloaded before from software.forge.mil. I tried installing those but that didn't help.
mozilla-dod-configuration-1.0.2-0.noarch.rpm
firefox-mozilla-dod-configuration-1.0.2-0.noarch.rpm
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch.rpm
Does anyone know if there is a later version of these RPM's or if there's another way to get our CAC readers working again with Firefox and Thunderbird?
Relevant Background Info:
Installed Packages:
ccid-1.3.9-2.fc12.x86_64
coolkey-1.1.0-11.fc12.x86_64
mozilla-dod-configuration-1.0.2-0.noarch
firefox-mozilla-dod-configuration-1.0.2-0.noarch
thunderbird-mozilla-dod-configuration-1.0.2-0.noarch
Could a renamed kernel module be part of the problem? What do you make of the following information?
Find library dependencies:
Code:
[root@inet3 ~]# ldd /usr/lib64/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so
linux-vdso.so.1 => (0x00007fff41bff000)
libusb-0.1.so.4 => /usr/lib64/libusb-0.1.so.4 (0x00007f52a37fd000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f52a35e1000)
libc.so.6 => /lib64/libc.so.6 (0x00007f52a3268000)
/lib64/ld-linux-x86-64.so.2 (0x000000374b400000)
[root@inet3 ~]# locate linux-vdso.so
[root@inet3 ~]# locate vdso.so
/lib/modules/2.6.31.6-166.fc12.x86_64/vdso/vdso.so
[root@inet3 ~]#
##!!
There is no module named "linux-vdso.so". It looks like there was a name change that broke the libccid.so dependencies. I tried creating links within "/lib/modules/2.6.31.6-166.fc12.x86_64/" named linux-vdso.so pointing to vdso.so but it still isn't working. I've unloaded the module within Firefox (and Thunderbird) preferences within the [Security Devices] manager. Then tried adding it back using the [Load] button and specifying the coolkey library again but it's still not working.
I have recently installed RHEL6 BETA on my desktop. the login page is somewhat different from RHEL5.4. I can see 3 option
1) Log into session with smart card authentication
2) Log into session with fingreprint
3) Log into session with username & password.
By default only first option is active. If I press cancel, then only I can get the options for user & other.Then if I am selecting my user account and giving the password, nothing is coming. The screen is just flicking & coming back to original. No authentication failure can be seen.
Anyone running fedora 11 have any luck getting a smart card reader added as a security device under firefox?
Specifically from firefox: Edit-Preferences-Advanced-Encryption tab-Security_Devices-Load;
Enter arbitrary name and "/usr/lib64/libcoolkeypk11.so" as the module.
This worked fine in fedora10 and was the necessary step to getting a card reader to work with firefox. In fedora11 (with firefox beta) the browser just comes back with nothing, it doesn't even respond. Note I am familiar with the concept of pki and certificates as well as certutil, pkcs11_inspect, pklogin_finder, etc. Also note utlities like pkcs11_inspect and pklogin_finder and esc all work and communicate with the reader and read the contents of the card but smart card login configured via the authentication applet (as working in fedora 10) is not working either.
Something has gone awry with my login. After the usual username/password prompt my laptop comes up with smart card authentication & I can't login. How do I get away from the graphical login so I can login & correct the problem?
View 3 Replies View RelatedI`m using Fedora 14 and i`ve one problem, i use x-lite phone on windows and what is x-lite alternative for linux ? i`ve found x-lite phone for linux but it dont work fine . It has problems with sound card etc. What do you recommend?
View 8 Replies View RelatedI've a smart card reader and a certificate (DNe). I'd like to use the certificate in the sc to login session (Opensuse 11.2 and Kubuntu 8.04).I've seen some modules (pam_pkcs11, pam_p11) but not able to configure them. Please, can any tell me what do I have to do for using my smart card to login KDE/Gnome Session?
View 2 Replies View RelatedI searched this forum for posts similar to the problem I am having and i found a few, but I did not understand the solution (unexperienced user here) so I thought i would ask.I recently installed fedora 13 on my laptop and everything appears to be detected, with the exception to my wireless card (a broadcom 43225 card).I checked the list of drivers that came with installation and i could not find one for this particular card. is there any way for me to get a driver that would work with it (maybe a more general driver, just something to make it possible to connect over the internet) Or is it
View 7 Replies View Relatedi have newly bought Desktop system with the following configuration:
1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb
i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies View RelatedI have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 Replies View RelatedI am having trouble getting NetworkManager to detect my Huawei-Vodafone dongle and I can't figure out why. I went and checked on NetworkManagers website and I should be good to gobut no such luck. look at the following:
manpep@manpep-desktop ~ $
manpep@manpep-desktop ~ $ dmesg | grep -e "modem" -e "tty"
[ 0.000000] console [tty0] enabled
[ 47.951906] USB Serial support registered for GSM modem (1-port)
[ 47.951958] option 3-2:1.0: GSM modem (1-port) converter detected
[ 47.952990] usb 3-2: GSM modem (1-port) converter now attached to ttyUSB0
[Code]....
Although "lsusb" see it (as usually) as Huawei model E620, in fact it's a much more recent one. It's the K3520, from last year.
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
I have Dell 1537 laptop having Intel 5100 wireless card. It is not supported by Fedora 9. I have tried downloading the driver iwlwifi-5000-ucode-8.24.2.12.tgz from URL...Downloads and copied it to folder /lib/firmware and rebooted the machine. But still it is not detected by the system. Is there any solution to this problem .
View 2 Replies View RelatedI have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies View Relatedi have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies View RelatedI've a laptop of Compaq Presario CQ040, I installed Fedora-9 but found that there is no sound. I ran lsmod, lspci and aplay -l command and the respective output is below:
How to configure the sound card and get it working?
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
In CentOS 5.3 there is a new "Smart Card Manager" window that pops up when I log in to KDE. Is there any way to disable it?
View 2 Replies View RelatedI am looking for an application to assist me to back up my sim card on my mobile telephone. In fact I am aiming to copy all my phone contacts and restore it on a newer phone if possible.
I have previously attempted to do this on Wammu without success.
I have also attempted to install monosim without success.
I have a problem with recognising my mobile phone's memory card in Ubuntu 9.10. When I plug the phone in it starts the mass storage mode, but nothing happens in the PC. I suspect that I may have deleted phone's icon from the desktop, and I don't know how to bring it back. Also the memory card doesn't appear anywhere: nor in the Places tab, nor in Media folder.The phone is Samsung U900 Soul.
View 2 Replies View RelatedFew weeks ago modified my old mobile phone SE k750i by setting on it w800i firmware. After this my phone isn't really (fully automatically) recognized by Ubuntu (9.10) which is the small problem for me now. Linux recognizes it as a USB device, but doesn't automatically mount it, which is why I have to do that manually and that leads to read only permissions for my user.
Here are the few outputs:
lsusb
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 006: ID 046d:c222 Logitech, Inc. G15 Keyboard / LCD
Bus 002 Device 005: ID 046d:c221 Logitech, Inc. G15 Keyboard / Keyboard
Bus 002 Device 004: ID 0fce:d028 Sony Ericsson Mobile Communications AB
Bus 002 Device 003: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 002: ID 046d:c223 Logitech, Inc. G15 Keyboard / USB Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg | grep usb .....
I've tried to create a custom udev rule via this thread, by putting the correct information according to lsusb:
Code:
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0fce", ATTRS{idProduct}=="d028", MODE="0660", OWNER="zivs"
and reloading the udev rules, but that didn't help also.
How could I make my Ubuntu mount the /dev/sdb1 (which is my phone's memory card, since manually mounting it, there's all my phone recorded stuff) automatically on Desktop with all read and write permissions when I connect my phone to computer? Phone gets recognized immediately on Win7 OS ... but after the firmware change it's not really recognized by Ubuntu anymore.
I want to use my CentOS-Server for logging incoming phone calls using an AVM Fritz-Card.It should also be possible to notify clients (Linux and Windows) on incoming calls, or there should at least be a web-frontend.Is there any software like that in the CentOS-Repository available?Or is there another software like that, that is easy to install? I already asked google (an i will go on), but I couldn't exactly find what I want.
View 1 Replies View RelatedI have a dual boot with W'XP and RHEL 5. M/B is MSI.
In XP the LAN is detected but not in LINUX.
Now the file upload feature is working, I have added the correctly indented php file as an attachment on post no: 3. The attached php script will create any missing smart channel files from the equivalent yum repo files. Any new smart channel files will be placed in a /new-smart-channels subdir of the yum repos directory.
Installation
Copy the attached php CLI script below to a new file, called create-smart-channels.php.
Change the permissions to something like:
# chown root:root create-smart-channels.php
# chmod 755 create-smart-channels.php
Then place the script in the directory that contains your yum repo files, usually /etc/yum.repos.d/
If you have set any open_basedir restrictions in /etc/php.ini, you will also need to add '/etc/smart/channels/:' to the search paths to allow create-smart-channels.php to read the contents of the /etc/smart/channels/ directory.
Warning:
Do not allow php access to the whole of the /etc directory. This could be a security issue. Whatever access restrictions are set with open_basedir (if any), you should override these in your httpd.conf file, to restrict apache's php module to only allow access to php files under your apache's document root. To do this, use something like this in your httpd.conf file:
<Directory />
Options None
AllowOverride None
Order Deny,Allow
Deny from all
# these are the only directories which the apache PHP module can
# have access to. This setting overrides the settings in the
# global php.ini file, which applies to the CLI version of PHP .....
I have a problem with Elantech Smart Pad under F12 on ASUS N61 notebook. I could not find the driver, and it is not possible to set sensitivity or to turn it off. It is quite annoying.Does anybody knows how to turn it off, or configure it?
View 1 Replies View RelatedIve just installed a fresh 10.04, and my Xfi- Xtreme Music card isnt showing up ion the sound options.Ive tried installing the latest alsa using the script thing, and its still not showing up.
View 4 Replies View RelatedUbuntu is not the problem; I don't think. I'm running Maverick 10.10. With my computer I have to unplug and plug back in the graphics card every time I want to start up the computer so I usually keep it running 24-7. There was a power surge and when I got it back running, once it reached the load boot screen and it was stuck their for awhile. Then it instantly sent me to x-term. So I tried logging in and typing:
sudo start gdm
It said it was already running but I could not display anything or login the normal way. I restarted and the same thing happened. I managed to get to Recovery Mode and I fixed broken packages and then I ran it in low graphics mode. It said that the display, monitors, input, and graphics card could not be detected. If there was a way to resize the screen to something more tolerably than 800x600 in low graphics mode I'd be glad to hear it. I could at least stick around to using that until I can fix some stuff up.
I'm Running ubuntu 10.10 with kubuntu 10.10 as well so I have no problems with ubuntu but when I login with kuntuntu I have sound but I get massage that kunbutu can't detect my sound card any more would you like it to forget it.Plus I can't change volume no volume icon on task bar.
View 1 Replies View Related