Fedora Hardware :: Wireless Card Not Detected?
Jul 5, 2010
I searched this forum for posts similar to the problem I am having and i found a few, but I did not understand the solution (unexperienced user here) so I thought i would ask.I recently installed fedora 13 on my laptop and everything appears to be detected, with the exception to my wireless card (a broadcom 43225 card).I checked the list of drivers that came with installation and i could not find one for this particular card. is there any way for me to get a driver that would work with it (maybe a more general driver, just something to make it possible to connect over the internet) Or is it
View 7 Replies
ADVERTISEMENT
Mar 22, 2010
I have Dell 1537 laptop having Intel 5100 wireless card. It is not supported by Fedora 9. I have tried downloading the driver iwlwifi-5000-ucode-8.24.2.12.tgz from URL...Downloads and copied it to folder /lib/firmware and rebooted the machine. But still it is not detected by the system. Is there any solution to this problem .
View 2 Replies
View Related
Jan 13, 2011
I have installed Fedora 14 on my new laptop Thinkpad T410 but the wireless card is not detected.
I tried to install the drivers but got error. How to install the driver.
[root@sheril sheril]# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) .....
View 1 Replies
View Related
Mar 7, 2009
I have downloaded and installed Fedora 10.Now I am setting up the network and in the 'network configuration' it finds the wireless device (ralink) in the 'hardware' section of the configuration - I set this to eth0 (it originally set itself to wan0 and I still had the same problems, now it doesn't give me the option to put it back to wan0).Now I goto the devices tab and try to set up the device with eth0 - which it seems to find.But when I goto activate the device it tells me that eth0 cannot be found
View 2 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Feb 2, 2011
I have searched and have not found anything specific to my issue. I am currently using NDISWrapper to load the bcmwl15 driver and when it's active it works beautifully.Problem is sometimes at boot, the card doesn't "turn on" and I don't know how else to describe it. The OS does not even detect that the hardware is present. I have disabled wireless hotkey in BIOS. The only way to make the wireless card "active" is to reboot with the wiredconnection to the router. After doing that the wireless card "wakes up" and works awesome.Is there anything I can do to make sure the driver load at boot?mes I get the error that NDISWrapper is not modprobbed when I go to network configuration and if I wish to do i now? I don't know if that has anything to do with the boot sequence. Using the <modprobe ndiswrapper> command as root does nothing permanant
View 9 Replies
View Related
Jul 23, 2010
I have purchased an ASUS PCE-N13 wireless card (PCI Express card). My PC doesn't actually detect that it is actually physically present.Would anyone have any idea on exactly what I should do. I have run a diagnostic script which outputs the following though I am uncertain what to do.
View 8 Replies
View Related
Apr 30, 2010
I have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
View 9 Replies
View Related
Jun 18, 2011
I bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.
View 1 Replies
View Related
Oct 5, 2010
I have linux mint on my Macbook but it is almost exactly like ubuntu, so here goes. I have a Macbook, about a year old, and when i use linux, the wireless card is not detected. Any site to download drivers at?
View 2 Replies
View Related
Mar 1, 2010
im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal
remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface
[code]....
View 6 Replies
View Related
Jan 9, 2011
i just installed debian after about 2 weeks of using ubuntu afterriend suggested switching, and it's not detecting my wireless card in the network settings. i'm new at linux so try to keep it simple if you can please,i read the sticky about this and here's the info it said i should provide
ispci -knn Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Kernel driver in use: agpgart-intel
[code]...
View 1 Replies
View Related
May 7, 2010
I started on ubuntu 8.10 and my wireless card has always worked,Since i did a fresh install of ubuntu 10.04 it still seems to work to a point.I can see networks, click them and use a password to connect but it never seems to carry on, I typed the password correctly and after a minute it asks for it again.I have read a post about problems other people are having and that i need to install a different program.But i cant install another program if there is no wireless as apt-get doesn't work without internet connection.So... I need to download something that will fix it (possible update if one has been released) to xp (partition) then access xp partition from ubuntu and install it.
View 9 Replies
View Related
Oct 20, 2010
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
View 2 Replies
View Related
Mar 14, 2009
Wireless card detected but cannot connect to a wireless network
I have install it suse 11, and everything went well until the wireless thing is not working, my card is Broadcom BCM4318, I see my card on the network settings but I cannot configure the card, and also I cannot connect to a wireless network, can someone tell me what to do here, I am loosing my patient....
View 4 Replies
View Related
Apr 7, 2011
I want to load Atheros wireless card to ubuntu linux OS having kernel 2.6.32.21. I have loaded the atheros driver and I observed the following log messages when card was inserted.
[ 55.732223] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 55.732294] pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 55.810152] ath5k: disagrees about version of symbol ieee80211_free_hw
[code]....
My suspect was the driver was 2.6.35.1 kernel based i may need to update my kernel, but i have other laptop having 2.6.32-21 kernel and this card works fine.
View 2 Replies
View Related
Jan 26, 2011
I am running the latest version of arch linux on a Dell Latitude D420. So far everything has worked perfectly except the wireless. It seems that Arch does not even detect the wireless because ifconfig -a only gives me the loopback and eth0. I installed ndiswrapper as well as the drivers. lsmod | grep ndiswrapper shows that ndiswrapper is being loaded on boot. I tried to install the iwp3945 drivers, but they have become obsolete so pacman was unable to find them. I also tried installing the iwl3945 drivers as explained here [URL] but still no luck.
View 14 Replies
View Related
Apr 21, 2011
Been using Ubuntu for 1 yr now on my Dell Dimension 8250 but a newbie with my Averatec AV3270-EH1 laptop circa 2005. Ubuntu 10.04 does not detect the Integrated WLAN card/adapter. I've looked at all the forums/posts but none had the issue I have. When I type lspci into the terminal i get this back:
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
[code]....
And when I type in iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
View 1 Replies
View Related
May 31, 2011
i have newly bought Desktop system with the following configuration:
1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb
i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.
View 4 Replies
View Related
Dec 17, 2010
Smart phone (MyTouch 3G) SD card is NOT being detected in Fedora 14 installed on Asus G73 JW-A1 laptop. Notes: SD Card, using the same cable, is detected just fine on Windows laptop and was detected on a desktop computer (that I no longer have access to) that was running Fedora 12.
View 2 Replies
View Related
Dec 17, 2010
I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies
View Related
Jan 27, 2010
I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 Replies
View Related
Jun 13, 2009
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......
View 4 Replies
View Related
Jun 14, 2010
i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..
View 4 Replies
View Related
Jun 9, 2009
I've a laptop of Compaq Presario CQ040, I installed Fedora-9 but found that there is no sound. I ran lsmod, lspci and aplay -l command and the respective output is below:
How to configure the sound card and get it working?
View 2 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Oct 11, 2010
I installed a new copy of F13 this morning on my fairly new laptop.32 Bit Intel, 3GB Memory 120GB HDD. The problem I've got is that my Monitor/Graphics card is not getting detected and as a result I'm getting a horrible Resolution/Refresh rate. When I run
lspci | grep VGA
I get this 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10). how I can get my monitor/graphics recognized to work in the Full Resolution.
View 11 Replies
View Related
Mar 28, 2010
I installed Fedora 11. I am using HP dv4 series. But, I am not able to access any of the wireless connections.
View 4 Replies
View Related
Jun 27, 2011
Ok, using gnome3 in F15. I'm going in to add my printer. I hit "network" and it searches for about 20-30 seconds and then stops. It's not picking it up.
View 8 Replies
View Related
Mar 16, 2009
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
View 14 Replies
View Related
