Ive just installed a fresh 10.04, and my Xfi- Xtreme Music card isnt showing up ion the sound options.Ive tried installing the latest alsa using the script thing, and its still not showing up.
View 4 RepliesI am attempting to get ubuntu working on my system.I have tried on previous systems without success, hopefully it works out this time.Currently my only major issue with it is I cannot get any sounds to play.I use a Logitech G35 usb headset and onboard audio (GIGABYTE GA-890GPA-UD3H motherboard, Realtek ALC892 audio chipset).Ideally, I'd like to be able to listen from either source, though just getting one working would be great.Ubuntu is currently not detecting any sound.
Using aplay -l, it said no sound card found. Using lspci -v, so sound devices were listed.I am a complete noob to ubuntu, I had to research to figure out what to do with 'aplay -l' (Application -> Accessories -> Terminal, type command in terminal). My Windows troubleshooting skills seem largely useless in a Linux environment.
After a while I decided to give ubuntu another go so I set up a dual boot configuration. Everything works well except my graphics card. I have 2 problems (don't know if they are connected)To start with, it's a laptop with an onboard Radion 3200 and it has another ATI Mobility Radeon HD4570 built in. I have an external screen attached to my laptop. (1920x1080)When Ubuntu first booted it asked me if I wanted to install proprietary drivers, so I did that. Now when I took a look in the control center it showed my two monitors but they were both attached to the 3200 and I can't seem to find anything about the other (better) card. It does not appear in the proprietary drivers, I can't (I think) select it in the configuration utility.
View 5 Replies View RelatedI don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
I've spent the past 2 days attempting to get the sound working on a Toshiba A75 notebook. Here is what i've tried so far:
remove/purge alsa and pulse audio then reinstall
set up/configure OSS
download and compile latest alsa drivers. code...
My questions are: is there anyone using this laptop on Lucid with sound? Can anyone provide a new idea how to make this work if it is compatible hardware.
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
Ubuntu is not the problem; I don't think. I'm running Maverick 10.10. With my computer I have to unplug and plug back in the graphics card every time I want to start up the computer so I usually keep it running 24-7. There was a power surge and when I got it back running, once it reached the load boot screen and it was stuck their for awhile. Then it instantly sent me to x-term. So I tried logging in and typing:
sudo start gdm
It said it was already running but I could not display anything or login the normal way. I restarted and the same thing happened. I managed to get to Recovery Mode and I fixed broken packages and then I ran it in low graphics mode. It said that the display, monitors, input, and graphics card could not be detected. If there was a way to resize the screen to something more tolerably than 800x600 in low graphics mode I'd be glad to hear it. I could at least stick around to using that until I can fix some stuff up.
I'm Running ubuntu 10.10 with kubuntu 10.10 as well so I have no problems with ubuntu but when I login with kuntuntu I have sound but I get massage that kunbutu can't detect my sound card any more would you like it to forget it.Plus I can't change volume no volume icon on task bar.
View 1 Replies View RelatedI have installed Ubuntu 10.10 in my system. I have plug in th USB card reader but it is not detected. Eventhough the same card is detected when I'd pluged in at last night and I have just browse the folders in the memory card.Then I just right click on the icon in media folder and click eject the texts in file /var/ log/messages for above operation.
View 2 Replies View RelatedWorking on a friend's PC, which was previously running XP and got a very nasty virus infection. I convinced him to try Ubuntu, showed him the interface running on my own machine and he was hooked. Backed up all his data to network, completely erased the hard disk and install Ubuntu. Sounds easy, right?
Installed 9.10, it didn't detect the video card and xorg.conf was missing from /etc/X11. After some messing around trying to get it to work, I realised that the sudo dpkg-reconfigure -phigh xserver-xorg command wasn't working properly and didn't produce the menu shown in the screenshots. After some digging I found that this was a bug in 9.10, so to make the job easier, I wiped the drive again and started again on 9.04.
With 9.04, at least the xorg.conf file was there, but had no entries under configured video device. I tried adding "vesa", "via", "openchrome" (all on separate attempts), all to no avail. I retried the dpkg -reconfigure command above. still no menu.
Now several days into this "easy" install, I rolled back to the LTS release (8.04 - hardy) and installed that instead. Still no video card detection, and resolution is obstinately stuck at 800x600. Tried the same string of tests again, and now admitting defeat The relevant output from lspci is: 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
The output from xrandr is:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0
[Code]...
I have bought a new laptop with W7 installed. And I installed dual boot with Ubuntu 9.10 on it.I tried to connect my laptop to Internet by Ethernet port. It works with W7, but Ubuntu doesn't detect my Network card .After some research on Internet, I suppose that it's a problem of drivers for this card.Here some parameters I could get :
>ifconfig :
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
[code]...
I have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
I'm in serious need of some help. The network adapter on the motherboard of my main machine apparently failed about noon today. This machine serves as the firewall and router for my home office LAN, and so it has two network adapters, the second being a PCI card installed in the only PCI slot of the mobo. The mobo's adapter served the WAN while the PCI card serves the LAN.Since the mobo has only one PCI slot, none of the other PCI cards I have on hand could be used. Instead, I pulled an unused PCI-e dialup modem card from the machine, and bought a PCI express gigabit card to put in its place.
The problem is that the machine (running Hardy 8.04.4 LTS) does not recognize the new card at all. Running lspci shows only the old PCI card that serves the LAN. Similarly, running "sudo lshw" shows only the old PCI card together with a virtual adapter that's part of my VirtualBox installation on that system.I then dual-booted into Vista Home and attempted to install the new card there, using the CD that came with it. Vista detected the card and asked for the disk, but then was unable to find any drivers on the disk!The box says the card is from Star Tech, and the instruction sheet says its model is ST1000SPEX.If anyone can point me to the correct module to add to the startup list and/or remove from the blacklist, that may get me going again.
I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..
View 2 Replies View Relatedfor some reason my graphics card is no longer detected by Ubuntu, just and hour ago everything was working perfectly (as Ubuntu usually does for me) and now it acts as if it's not there.
View 9 Replies View RelatedI bought a new TOSHIBA C660 - i5010 today and installed.Lucid Lynx 10.04 on it, but it has not detected my wirelessg broadcom 80211 (STA) driver debp interface.
View 1 Replies View RelatedI got Linux Ubuntu because my Vista installation messed up, and I couldnt find the recovery CD. Im pretty glad I installed Linux, as it seems really freidnly, and a bit more open that Windows, I must admit. The problem is, I am trying to install my Nvidia GeForce 8600GTS on the system, and it isnt working. It was working fine on Vista before, so it shouldnt be a hardware problem. I have followed various instructions on websites, whioch take me throguh some stuff about stopping GNOME, removing * linux restricted module * and so on. But when I get to the crucial point, with the agreements and installations for Nvidia, it tells me it cant detect any graphics cards.
View 11 Replies View RelatedI have linux mint on my Macbook but it is almost exactly like ubuntu, so here goes. I have a Macbook, about a year old, and when i use linux, the wireless card is not detected. Any site to download drivers at?
View 2 Replies View RelatedI have a dual boot with W'XP and RHEL 5. M/B is MSI.
In XP the LAN is detected but not in LINUX.
im having some trouble connecting the wireless card to my wifi network, theres is a hint using the terminal
remora@remora-laptop:~$ sudo lshw -C network
[sudo] password for remora:
*-network DISABLED
description: Wireless interface
[code]....
I'm having a problem with my wifi card: it is not detected by the network manager. I have tried going to the Hardware Drivers utility, but it doesn't find any proprietary hardware.I really am at a loss as to how to make Lucid "start over" with the wifi detection.I have installed Lucid using an existing /home, which was under 8.10. Maybe i just need to wipe out some configuration files to start afresh?
View 9 Replies View RelatedUsing xsane with HP scanjet 3970 scanner. It used to be that when I plugged the scanner in and started the xsane a window would come up asking if I wanted to use my HP scanner or my Hauppauge video card. Well, that window no longer comes up and the Xsane wants to use my video card. When I try to "scan" the program closes and all the windows associated with it disappear.
View 1 Replies View RelatedI have a Realtek gigabit onboard ethernet (RTL-8110SC/8169SC)It was working in 9.10.After upgrading to 10.04, the connection dropped to 10MB. Now, lspci -v shows the card, but Ubuntu no longer recognizes eth0!I have no connection on the machine. I've been digging around the forums, but can't seem to find what I need.
View 2 Replies View RelatedI have a DFI RS482 mobo with integrated sound. I am making a car puter and only have a 2GB CF card, so I installed a server install of Ubuntu. Then I got xserver-xorg, mplayer, and fluxbox. I downloaded and installed the latest nvidia driver. Mplayer spit out tons of sound errors and that's when I realized the server install has no sound. So I installed the 'alsa', 'pulseaudio' and 'pavucontrol' packages. Now mplayer does not complain and acts like it is playing sound, but nothing happens sound-wise. Pavucontrol shows mplayer as playing sound and the volume as unmuted. However the PCM output is going to "dummy output" and the configuration tab says there are no cards to be configured.
So I think my sound card is not being detected. I don't know what to do at this point.
lspci shows "Multimedia audio controler: ATI Technologies inc. IXP SB400 AC'97 Audio Controller (rev 80)"
alsamixer fails on "function snd_ctl_open failed for default: No such file or directory"
lsmod | grep 97 returns a bunch of stuff, but I'm not sure what it is.
I'm using mythbuntu 10.10 with 2 pci tuner cards and 1 SB PCI sound card. My system is detecting my tuner cards as audio devices and making one of those my default sound cardWhich file do I change to make the SB card the default sound card?
View 2 Replies View RelatedHardware : Intel atom (COM)Audio - ALC 888OS : Ubuntu 9.04Observation : Sound Card not getting detected.-> I downloaded High Def. Audio Codec as "LinuxPkg_5.13rc9.tar.bz2" from RealTek site, compiled and installed the drivers.-> But while installation I got a GUI saying "No PnP or PCI audio card detected".-> lspci command shows all other pci connected devics except sound card(ALC888).->I tried recompilation of Linux kernel to make HDA Codec as a Built-in modules (built-in ALSA driver support) ,but still there was no change in behaviour.
View 5 Replies View RelatedI added to my machine PC running debian and others, ubuntu, pc wireless card:,the same card I used it on other machine, it ran nice.On the other machine i have Ethernet Controller instead of Class ffff.I installed the divers firmware-ralink and other realtek and network-manager, but nothing.on other machine, that was enough to run it correctly.and ifconfig dosn't give wlan0,iwconfig did't give characteristic of wlan0.does this mean that the bios didn't recognize it as a network card
View 3 Replies View RelatedI have installed fedora core 8 on my system. But i am unable to use LAN connection. here are the results of some of the commands which give error messages
[root@localhost ~]# lspci | grep -i ether
00:19.0 Ethernet controller: Intel Corporation Unknown device 10f5 (rev 03)
[root@localhost ~]# uname -a
[code]....
I started on ubuntu 8.10 and my wireless card has always worked,Since i did a fresh install of ubuntu 10.04 it still seems to work to a point.I can see networks, click them and use a password to connect but it never seems to carry on, I typed the password correctly and after a minute it asks for it again.I have read a post about problems other people are having and that i need to install a different program.But i cant install another program if there is no wireless as apt-get doesn't work without internet connection.So... I need to download something that will fix it (possible update if one has been released) to xp (partition) then access xp partition from ubuntu and install it.
View 9 Replies View RelatedI'm a Linux noob, so please go easy on me! I've been desperate to get rid of my Windows install for a while now and have finally started to make the move over, but have a problem with my Ubuntu 10.04 install. I've scoured the help documentation and forum for days now without managing to resolve my problem, and have finally resorted to posting my problem. So I'm sorry if this has been covered elsewhere.
1 Installed Ubuntu on my laptop (Viglen Furtura S200) but the only way I have been able to get it to install and boot properly is edit the GRUB with the following acpi=off i915.modeset xforcevesa. I had to add these parameters even to boot the live CD as well. I think I'm right in assuming that this is forcing the use of a generic graphics driver, consequently leaving some visual features unavailable. I'm not really sure what turning acpi off is doing. Is it possible to resolve this? Is this the cause of problem number 2?
2 After install there is no sound. Sound preferences shows no hardware and ALSAmixer is empty when opened. I have followed the sound troubleshooting through and it looks like my sound card is actually being picked up on the board, but I fall at the point of checking the loaded ALSA Modules as my report shows that none are loaded?!