I have installed Windows7,and Redhat9 next installed but set as default.Problems:- Sound card is not detected using sound card detector.(I faced no such problem when i had installed Fedora3,and Fedora11) -Modem is not detected too when querying modem. -Could not find in PC (when Fedora was installed)or find and download needed codec packs and plugins so nearly most media could not be played.
View 1 RepliesI've a laptop of Compaq Presario CQ040, I installed Fedora-9 but found that there is no sound. I ran lsmod, lspci and aplay -l command and the respective output is below:
How to configure the sound card and get it working?
I'm Running ubuntu 10.10 with kubuntu 10.10 as well so I have no problems with ubuntu but when I login with kuntuntu I have sound but I get massage that kunbutu can't detect my sound card any more would you like it to forget it.Plus I can't change volume no volume icon on task bar.
View 1 Replies View RelatedHardware : Intel atom (COM)Audio - ALC 888OS : Ubuntu 9.04Observation : Sound Card not getting detected.-> I downloaded High Def. Audio Codec as "LinuxPkg_5.13rc9.tar.bz2" from RealTek site, compiled and installed the drivers.-> But while installation I got a GUI saying "No PnP or PCI audio card detected".-> lspci command shows all other pci connected devics except sound card(ALC888).->I tried recompilation of Linux kernel to make HDA Codec as a Built-in modules (built-in ALSA driver support) ,but still there was no change in behaviour.
View 5 Replies View RelatedI am attempting to get ubuntu working on my system.I have tried on previous systems without success, hopefully it works out this time.Currently my only major issue with it is I cannot get any sounds to play.I use a Logitech G35 usb headset and onboard audio (GIGABYTE GA-890GPA-UD3H motherboard, Realtek ALC892 audio chipset).Ideally, I'd like to be able to listen from either source, though just getting one working would be great.Ubuntu is currently not detecting any sound.
Using aplay -l, it said no sound card found. Using lspci -v, so sound devices were listed.I am a complete noob to ubuntu, I had to research to figure out what to do with 'aplay -l' (Application -> Accessories -> Terminal, type command in terminal). My Windows troubleshooting skills seem largely useless in a Linux environment.
hello experts! i have a problem with my sound card (Creative SB X-Fi Xtreme Audio), Got the driver from Creative site. The problem is that the card is detected but no sound is produced, it's not muted, i already checked. also tried the latest pulseaudio but nothing seem to work. what could be the problem?
View 2 Replies View RelatedI have a DFI RS482 mobo with integrated sound. I am making a car puter and only have a 2GB CF card, so I installed a server install of Ubuntu. Then I got xserver-xorg, mplayer, and fluxbox. I downloaded and installed the latest nvidia driver. Mplayer spit out tons of sound errors and that's when I realized the server install has no sound. So I installed the 'alsa', 'pulseaudio' and 'pavucontrol' packages. Now mplayer does not complain and acts like it is playing sound, but nothing happens sound-wise. Pavucontrol shows mplayer as playing sound and the volume as unmuted. However the PCM output is going to "dummy output" and the configuration tab says there are no cards to be configured.
So I think my sound card is not being detected. I don't know what to do at this point.
lspci shows "Multimedia audio controler: ATI Technologies inc. IXP SB400 AC'97 Audio Controller (rev 80)"
alsamixer fails on "function snd_ctl_open failed for default: No such file or directory"
lsmod | grep 97 returns a bunch of stuff, but I'm not sure what it is.
I'm using mythbuntu 10.10 with 2 pci tuner cards and 1 SB PCI sound card. My system is detecting my tuner cards as audio devices and making one of those my default sound cardWhich file do I change to make the SB card the default sound card?
View 2 Replies View RelatedI'm a Linux noob, so please go easy on me! I've been desperate to get rid of my Windows install for a while now and have finally started to make the move over, but have a problem with my Ubuntu 10.04 install. I've scoured the help documentation and forum for days now without managing to resolve my problem, and have finally resorted to posting my problem. So I'm sorry if this has been covered elsewhere.
1 Installed Ubuntu on my laptop (Viglen Furtura S200) but the only way I have been able to get it to install and boot properly is edit the GRUB with the following acpi=off i915.modeset xforcevesa. I had to add these parameters even to boot the live CD as well. I think I'm right in assuming that this is forcing the use of a generic graphics driver, consequently leaving some visual features unavailable. I'm not really sure what turning acpi off is doing. Is it possible to resolve this? Is this the cause of problem number 2?
2 After install there is no sound. Sound preferences shows no hardware and ALSAmixer is empty when opened. I have followed the sound troubleshooting through and it looks like my sound card is actually being picked up on the board, but I fall at the point of checking the loaded ALSA Modules as my report shows that none are loaded?!
I don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
I've spent the past 2 days attempting to get the sound working on a Toshiba A75 notebook. Here is what i've tried so far:
remove/purge alsa and pulse audio then reinstall
set up/configure OSS
download and compile latest alsa drivers. code...
My questions are: is there anyone using this laptop on Lucid with sound? Can anyone provide a new idea how to make this work if it is compatible hardware.
If I boot CentOS (5, up to date) without my USB headphones are plugged in, all sound output goes to the sound card. But if I have the headphones plugged in when I boot, all output goes to them, and the sound card does not seem to be recognised at all.
Is there any way I can force the sound card to be recognised, and chosen as the default device, when booting with the headphones plugged in? If I have booted with the headphones plugged in, and then I unplug them, go into System|Preferences|Sound, and press the Test button with sound playback set to autodetect, I get a dialog with the message: audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open audio device for playback.
Then I started System|Administration|Soundcard detection, and it detected both Intel and Radeon sound cards, but its test button did not produce any sound for either. I moved the Intel device to the top of the list in the Settings tab, and then ran "Reload audio drivers" in the System tab. I got an error message saying I needed to reboot, but I didn't. At this point, the test buttons in the Sound test tab, and in System|Preferences|Sound started working OK. Do I have to go through this rigmarole every time I boot with the headphones plugged in?
how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.
#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
#lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
[code]....
I run Kubuntu 11.04 and I have a C-Media CM8738 sound card. My problem is, my card won't record from the line-in jack, even when I set it to capture in alsamixer. Furthermore, the mic jack only records when both the line-in and the mic are set to capture in alsamixer. I'm using the same settings I used in 10.04, and the line-in captured fine then.
View 6 Replies View Relatedi own toshiba satellite a660 laptop. A fresh install of ubuntu 10.10 works great, but i have a sound problem. Sound only works with headphones. No sound is played through speakers.What should i do?Install any third-party driver?
View 4 Replies View RelatedI decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
Sometimes (quite frequently) during the normal use of my laptop (64bit Ubuntu 9.10), if I do not play songs nor anything else, I get annoying sounds, like when guitarists cable their instruments while ampli are on.Apparently this happens particularly when I open new windows or new tabs in my browser, when I shut down my pc, etc...
View 1 Replies View RelatedI would like sound from mono sources to play in both speakers/earphones. How do I do this? Currently, it plays in only one side (which makes for an odd listening experience).I generally use banshee to play sound.
View 2 Replies View Relatedhow to modify (or get rid of) the sound (music) that is played when the computer starts ? (with ubuntu).
View 5 Replies View RelatedI have this one AVI file legally downloaded from Veoh, which, however, I cannot playback. If I try to play it back under Totem 2.26.5, (GStreamer 0.10.25), I can see the video, I get no obvious error messages, but I get no sound no matter what I set the volume to: other files I get sound. Under Properties, I see for the Audio codec: Dolby Digital (AC-3). I am running Fedora 11 with all the updates.
View 2 Replies View RelatedI searched this forum for posts similar to the problem I am having and i found a few, but I did not understand the solution (unexperienced user here) so I thought i would ask.I recently installed fedora 13 on my laptop and everything appears to be detected, with the exception to my wireless card (a broadcom 43225 card).I checked the list of drivers that came with installation and i could not find one for this particular card. is there any way for me to get a driver that would work with it (maybe a more general driver, just something to make it possible to connect over the internet) Or is it
View 7 Replies View Relatedi have newly bought Desktop system with the following configuration:
1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb
i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.
installed Fedora 11 on my laptop a couple of days ago. Everything went well in the installation except for the fact that I have no sound. I have a HP Pavilion dv5 and I have installed Gnome as my desktop. I tried fiddling around with the sound sliders in System/Preferences/Sound/ and System/Preferences/Advanced Volume Control but with no success in getting the sound to work. What is the problem with my sound? Any help would be appreciated. Interestingly, I had no problems with sound in Fedora 10, except for the fact that my internal mic was not working out of the box but even with that, I was able to find a workaround to get it working. By the way, I have the Intel 820801i (ICH9 Family) HD Audio Controller as my sound card.
View 14 Replies View RelatedSmart phone (MyTouch 3G) SD card is NOT being detected in Fedora 14 installed on Asus G73 JW-A1 laptop. Notes: SD Card, using the same cable, is detected just fine on Windows laptop and was detected on a desktop computer (that I no longer have access to) that was running Fedora 12.
View 2 Replies View RelatedI have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.
View 14 Replies View RelatedI'm using the ./livecd-iso-to-disk.sh script to create a bootable usb. Now in the arguments you're supposed to indicate a partition name. But my usb device gets auto-mounted to /media. And if I try to pass in /dev/sdb it gives me a "no media detected" message. What do?
View 3 Replies View RelatedMy soundcard (a Creative X-Fi Xtreme Music) is running with the unix-driver offered by Creative. But after a restart (without switching power off) I have to switch the sound device in xmms from ALSA to OSS. Also my tv card (an hybrid card from Hauppauge, WIN-TV HVR-1300) is only getting a signal after a restart, before there is no signal found. To get sound while watching tv I'm using one of the following lines, it seems to be random wich of them is working without error:
> sox -r 48000 -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp
> sox -r 48000 -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp1
So it looks like a problem in loading the modules in correct order, but I'm not sure. Perhaps there is also a problem with my nvidia graphic card (see list below for the kind of card), that I have installed with the unix-drivers from nvidia's webpage. To solve this problem I'm now searching since september, when I got my new computer, including:
-graphics: Lead896 D3 X GTX260 Extreme+
-CPU: Intel Core2Duo E8500, 3166 MHz, FSB 775
-mainboard: Asus P5Q-E, P45 F G SA
[code].....
I have F13 installed on a Gigabyte MB with on board audio and rear panel plugs. I'm not hearing anyting from the speaker tests from System|Preferences|Sound GUI or from the SATA DVD with a CD inserted. (Or Rythmbox, or Amarok) I've tried headphones and amplified speakers with no output detectable. The 'aplay' and 'aconnect' utilities don't report any errors when probing the audio setup. Any suggestions on how I can isolate where the problem might be occuring? Can I use the a version of FedoraPlus or possiby easyLife on Fedora13 to update the codecs or drivers?The rest of the system is running great with most of the mysql and tomcat stuff porting over from Solaris with very few changes. Fixed color printing last night, but I seem stuck on audio for now.
View 2 Replies View RelatedI have recently installed Ubuntu 11.04 from the alternative installation CD; the installation was just the command line system. On top of this I have installed xorg and awesome window manager. The only problem I am having is with sound; I am unable to hear sound played through both browser-based Flash and locally stored files.
Is there something that I have to do before I can use sound? Edit: I have solved the original problem however I would like to know if I can remove pulseaudio as it seems that I am only using alsa.
I have a problem with Netgear Wireless WG311v3 card and it is not listed in "ifconfig -a". Network Manager does not see the Netgear card either, just eth0 the onboard wired NIC. Here is the result of lspci.
Code:
[root@mylinux ~]# lspci -nn
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface [11ab:6101] (rev b2)
[Code]......