Last night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).
Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
I ran update on my ASUS N51Vf laptop yesterday and among the updates there was one for udev. After installing it udev refuses to start at all saying: "iTCO_wdt: unexpected close, not stopping watchdog". Then I get to login but not for long: after several seconds either system reboots instantly or it hangs shutting down display. Is there any way to rollback udev update somehow considering I can't even login into system?
i used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
I've noticed a bad behaviour with the latest 2 Fedora kernel releases:
- it happens with 2.6.31.12-174.2.19.fc12.x86_64 and 2.6.31.12-174.2.3.fc12.x86_64
- but 2.6.31.9-174.fc12.x86_64 is OK
The problem is as follows: Any kind of terminal application (any X based terminal and the console itself) hangs on certain operations involving colors from what I've seen
E.g. 'ls -F --color' as predefined in Fedora works but 'ls -F --color -a' hangs. Midnight Commander also hangs but works on black and white.
My terminal is xterm-256color under X and linux under console.
Other observations:
- it happens on a AMD machine but not on an Intel i.e. not all hardware is affected (couldn't narrow it more)
- same machine, same software stack but with kernel 2.6.31.9-174.fc12.x86_64 works OK
The latest kernel(2.6.32.9-67) is causing problems for my laptop.What are the best practices for safely removing a kernel?( Yum wants to remove gcc and friends also...)How can one prevent Software Update from relisting the bad boy?
Anyone know what happened here or what I need to do? I'm running Fedora 12 and had the nvidia video driver setup and working perfectly from rpmfusion repo ... I just did a yum update and now my display is stuck on 800X600 ....
I have a Macbook Pro 5,5. I had Fedora 14 installed on it, updated to the latest version. I updated the kernel, and performed an update. Now, every time my system starts, it loads up the startup fedora bar, and it gets stuck at the bar being loaded 100%.I press ESC to see what is going on behind the scenes, and I notice that the problem is that atd cannot start up.
I am relatively new to the Linux System (8 months). I am having issues after upgrading the Scientific Linux 6 kernel from its current 2.6.x version to the latest version that SL6 has available. The issue is that once I install the upgrade and reboot, the internet becomes extremely laggy when scrolling on web pages, so much so that you get a ripple like effect as your scrolling. Which doesn't occur in the current kernel i am using.
Current Kernel is: 2.6.32-71.18.2.el6 New Kernel RPM update is: 2.6.32-71.29.1.el6
I wish I could figure out the problem but I am having trouble identifying what exactly the current kernel has that the new one doesn't that would cause the internet lag. I have read other topics with similar kernel update problems, but none have expressed an internet problem & only an internet problem from a kernel update.
I am running the 64-bit version of Fedora 12 on an MacBookPro5,1 Intel Core 2 Duo with 4 Gigabytes or RAM.
I updated my system to use kernel 2.6.32.16-141.fc12.x86_64. Now when I try to boot the machine to that kernel, I'm left with a blank screen except for a blinking underscore cursor in the upper left corner after going through the load progress bar animation that appears at the bottom of the scene when Fedora is booting up.
I have my system configured to use the nVidia drivers for OpenGL 3D acceleration
I have to boot to previous kernel to have a usable system.
What can I do so that the system will boot up properly with the latest kernel?
On my HP i7 based laptop the latest kernel 2.6.33-147 and possibly Nouveau/X.org seems to have broken suspend. ie If the laptop is suspended then when woke, the screen is dead and networking does not work and I cannot change to a different console.If I boot the previous kernel this behaviour does not occur.
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
10.04 Gnome desktop install on Acer Aspire One netbook, wifi connection very unstable since last round of updates, wondering if ndiswrapper would work better
Just moved from Mandriva 2010.1 to Ubuntu 10.10 and am having problems with the wifi. It connects fine, but tends to grind to a halt every now and then. I always have this problem with Ubuntu... hence me migrating to Mandriva in the past. My card uses the Atheros AR5007G Wifi chipset. So, using ndiswrapper, I installed the windows drivers. Everything seemed to go okay. Yet, after a restart, I'm having the same problem. Which makes me think I'm still using the same old driver. So I added blacklist ath_hal and blacklist ath_pci to /etc/modprobe.d/blacklist.conf. Restarted. And I'm still having drop-out problems.
In my laptop, after upgrade, wifi stop working.My laptop is Fujitsu-Siemens Amilo Pro V2065, wifi cart Philips 12127e (from IBM T41), linux kernel: 2.6.37-020637rc3.This card worked before upgrade, and work on windows Command lshw -c network return:Quote:
*-network:0 UNCLAIMED description: Ethernet controller product: AR5212 802.11abg NIC
I have install windows XP and Fedora-14-X86_64 on dual boot, I want to run other OS on fedora by using Virtual machine. I have download and installed VirtaulBox-4.0.0 successfully but I cannot able to start it. I got error about Vbox driver not installed [error code:1908]. I have also installed DKMS package, but also didn't work.
Finally I found the actual problem was kernel not compatible with latest version of vbox and I need to update my kernel-headers. I also meet that solution by using command: yum install binutils gcc make patch libgomp glibc-headers glibc-devel kernel-headers kernel-devel and its work fine, this command download and install the kernel compatible VirtualBox-3.2.* and now its works fine.
But problem is that when I booting my PC, it shows 3 options for entering OS rather then 2. 1. Fedora-14 (2.6.35.10.74.X86_64) [which is new one/updated after using that command] 2. Fedora-14 (2.6.35.6.45fc14.X86_64) [which is new one/updated after using that command] 3. Other [windows XP] How can i delete that old version- No.2?
I have Acer Aspire 4740 laptop with Atheros ar928x wireless. My wireless is very slow, unstable. Wireless card still works well and fast in Windows (dual booting). After searching I see that there are many Ubuntu users have the same problem in Ubuntu 11.04 with this card.
I have an Atheros ar2427 chip in my Asus EEE 1001P and I'm using WICD to configure it. I can scan for wlans, but I can not connect. I installed the compat wireless package from yast and I downloaded the source from the compat wireless site and tried to compile it (which seems to be the solution for Ubuntu) but I got an error and an interesting warning
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
Previously my wifi has worked just fine in 10.04, but as of recently I keep losing my connection after leaving my laptop on for a while (and this happens sooner and sooner each time, used to be daily, now it's every few hours), I can no longer see any networks at all, and I have to reboot to get it working again. I haven't even installed or removed any packages lately, so I'm not such what might've caused this to break all of a sudden.
The latest installed kernel stopped working. ( 2.6.35.13-92.fc14.i686) It won't boot. I just get black screen with blinking cursor in top left corner. How do I, or can I, remove and reinstall?
i'm running Ubuntu 10.10 32-bit on an Acer Aspire 3050 laptop with an Atheros AR5BMB5 WiFi card.
The problem i'm having is that the hardware switch to turn the WiFi on and off isn't working right. When I hit the switch to turn it off, the light doesn't turn off, and Ubuntu just disconnects from the network and searches for more WiFi networks - it doesn't say that the WiFi has been deactivated, and I don't think it is. When I hit the switch again, it finds my network and connects to it.
The lspci -v | less command gives me the following information for the WiFi:
Code: 08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01) Subsystem: AMBIT Microsystem Corp. Device 0418 Flags: bus master, medium devsel, latency 168, IRQ 21
[Code]....
It lists a different model of card, but it's using what I assume is the correct driver, so I don't know if that has anything to do with it. I've checked the card itself and it is a AR5BMB5.
I would like to fix it so the switch actually turns the WiFi off instead of just making it search for more networks (I assume it's not actually turning off), and perhaps make the light turn off as it should as well.
So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code: WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/. Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
I am experiencing the "slow internet" problem (mentioned multiple times in these forums) but it started exactly when I ran an online update, which switched my boot image from vmlinuz-2.6.31.12-0.1 to vmlinuz-2.6.31.12-0.2. Perhaps a setting somewhere got overridden? When the update occurred, grub couldn't find the OS because it had the wrong version #, and I manually edited it (via a livedisk) and that fixed it; it also switched my vga resolution in the grub conf. OpenSUSE is *acting* like ipv6 is enabled again, but ifconfig doesn't report that, and my MTU is close to 1500.
A quick note for other frustrated Ubuntu users out there. I have a D-Link DWA-510 PCI wireless card (RT61) that just stopped working. After wasting hours searching posts and asking for help, I've determined that there's a problem in the latest Kernel to be rolled out.
I have now installed StartUp-Manager, and used it to boot into the old 2.6.31-22 kernel still on the machine and, hey presto, wireless is working again. It seems like the simplest fix by far.
