I have Acer Aspire 4740 laptop with Atheros ar928x wireless. My wireless is very slow, unstable. Wireless card still works well and fast in Windows (dual booting). After searching I see that there are many Ubuntu users have the same problem in Ubuntu 11.04 with this card.
View 4 RepliesI have an Acer Aspire V15 Nitro Black edition, and I recently installed after working so hard Debian 8.2
My problem is that I can't see any WiFi connection...
I believe that the firmware for my card is the ath10k, but I can't install it...
lspci -nn | grep Network
07:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:003e] (rev 20)
I have a mysql server in guest domU on debian squeeze. when i create test table and do INSERT INTO test (name, value) VALUES(RAND(), RAND()); Query OK, 1 row affected (0.28 sec)
At other physical server with same configuration Query OK, 1 row affected (0.00 sec)
I try this several time but on physical server max value never get over 0.05sec and on VM lowest value was 0.13sec.
Another tests:
On physical server:
OLTP test statistics:
Threads fairness:
on VM:
OLTP test statistics:
Threads fairness:
performance of disk write speed on VM is much better then on physical server .
Just installed squeeze and noticing slow responses to ping. Ping with -n is fine, and as expected. Ping without -n is very slow to appear on the screen.
ben@WOPR:~$ ping google.com
PING google.com (74.125.230.114) 56(84) bytes of data.
64 bytes from 74.125.230.114: icmp_req=1 ttl=54 time=26.2 ms
64 bytes from 74.125.230.114: icmp_req=2 ttl=54 time=25.9 ms
64 bytes from 74.125.230.114: icmp_req=3 ttl=54 time=29.3 ms
64 bytes from 74.125.230.114: icmp_req=4 ttl=54 time=25.5 ms
^C64 bytes from 74.125.230.114: icmp_req=5 ttl=54 time=25.8 ms
--- google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 20199ms
rtt min/avg/max/mdev = 25.514/26.569/29.308/1.399 ms
ben@WOPR:~$ ping -n google.com
PING google.com (74.125.230.115) 56(84) bytes of data.
64 bytes from 74.125.230.115: icmp_req=1 ttl=54 time=25.6 ms
64 bytes from 74.125.230.115: icmp_req=2 ttl=54 time=26.0 ms
64 bytes from 74.125.230.115: icmp_req=3 ttl=54 time=26.8 ms
64 bytes from 74.125.230.115: icmp_req=4 ttl=53 time=21.5 ms
^C
--- google.com ping statistics ---
5 packets transmitted, 4 received, 20% packet loss, time 4006ms
rtt min/avg/max/mdev = 21.540/25.042/26.859/2.064 ms
I've tried disabling ip6, disabling avahi and adding options single-request to my /etc/resolv.conf - problem remains. If it helps when installing Squeeze was prompted to install firmware-realtek, which I didn't have. So downloaded onto usb from another machine installed once setup was complete.
I just installed OpenSuSE 11.3 x86_64, and as I'm new to OpenSuSE I can't get my wireless to work. I believe it should work because it worked out of the box in Ubuntu (9.10 and 10.04)
At first I didn't see any network icon in the notification area, but after some googling figured out to enable NetworkManager instead of ifup. Now there is an icon, and clicking it I can see wireless networks, but when I try to connect it tries for a while, then seems to give up.
/sbin/lspci gives
Code:
Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter PCI-Express) (rev 01)
/sbin/lspci -n gives
Code:
168c:002a (rev 01)
[Code].....
I just downloaded Ubuntu Studio on my laptop and I can't get the wireless to work. I think it's because I need a driver; the Atheros AR928x. Whatever the driver is, it works with the pretty unpopular Musix distribution, because wireless worked instantly when I got that. I switched because it was old and slow.
View 3 Replies View RelatedI was doing some testing on my CR-48 notebook, which seemed to be very slow wirelessly when running Ubuntu 11.04. I cracked it open and decided to swap out the wireless cards with an Intel Wifi Link 1000 card I had in my other laptop, which is a Dell Latitude. I then began to do some speed testing, using speedtest.net. I tested each laptop 5 times for each card, so I did 20 tests total.
5 - CR-48 - Intel
5 - CR-48 - Atheros
5 - Latitude - Intel
5 - Latitude - Atheros
The results I think speak for themselves. While the Atheros card no doubt *works*, it doesn't work as efficiently as the Intel card I tried. I also noticed if I shut off my wireless security, my speeds drastically improved on the Atheros card. On my router (WRT54G) I used both mixed mode, G-only mode, WPA, WPA2 and a mixture of TKIP, AES, and TKIP+AES encryption. My results were the same across the board unless I took off security.
Wireless Card PingDownload Upload
CR-48
Atheros AR928X405.721.37
Atheros AR928X404.5516.45
Atheros AR928X372.030.39
Atheros AR928X361.9415.95
Atheros AR928X513.2215.34
Dell E5500
Atheros AR928X5512.085.1
Atheros AR928X542.463.77
Atheros AR928X5414.574.83
Atheros AR928X541.973.43
Atheros AR928X563.054.06
CR-48
Intel WiFi Link 10003815.615.37
Intel WiFi Link 10003814.5715.04
Intel WiFi Link 10003719.2913.8
Intel WiFi Link 10003622.4514.73
Intel WiFi Link 10003817.7414.81
Dell E5500
Intel WiFi Link 10005115.574.53
Intel WiFi Link 10005316.065.02
Intel WiFi Link 10005419.183.2
Intel WiFi Link 10005416.374.8
Intel WiFi Link 10005318.674.49
Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
I'm using Dell Latitude D620 notebook,with Squeeze amd64.This is the output of lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated
[code]....
I'm trying to find a driver for my wireless card (Atheros AR928X) and I think it's ath9k what I need. As far as I know there isn't a linux driver for it, so I installed ndiswrapper to use a windows driver instead. The problem is that when I type modprobe ndiswrapper I get "bash: modprobe: command not found" (even as root). I know I'm missing something about modprobe, but I can't find any help on google. Anyway, I installed ndisgtk next, because I thought it would be easier, but when I go to System> Administration> Windows Wireless Drivers I get a message "Unknown error".Do you have any ideas on how I'll make ndiswrapper work?
View 3 Replies View RelatedI just loaded the Ubuntu maverick AMD64 beta and to my regret I see that the wireless adapter isn't functioning, even after applying updates through wired connection.
Terminal lspci -v command tells me that the network adapter is present as Atheros AR928X Wireless Network Adapter on PCI-E - rev 01 and that the ath9k module is being used by the kernel.
i used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
View 6 Replies View RelatedI have installed CentOS 5.3, and updated with yum update. I have kernel 2.6.18-128.1.10.el5xen.
I can't get my wirelss network to work, I have AR928X wireles network adapter.
Do I need to install a newer kernel and install ath9k or can I just downlad a driver without updating the kernel?
I'm new to CetOS and Linux so I hope someone kan give me a step by step guide to what I can do!
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies View RelatedI am having some troubles with my networking. I have a fresh install of Debian 4.0.4-1. My problem is: I boot up and everything is great.
Code: Select all~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:46:4b:ae
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code] ...
I try to switch the hardware switch on and off with no avail. The only way to fix it is to reboot. But then when I ifconfig down and up I'm stuck in airplane mode again.
Can't understand what's going on... Running 'apt-get update' I see that diffs are downloading with a normal speed (11.3 Mbyte by 49 seconds = ~ 227 Kbyte/sec - it's OK, my 'up' limit is 384 Kbyte/sec). But - running 'apt-get dist-upgrade' I see that packages are downloading w/ around 4000 byte/sec. WTF? What's the difference between downloading packages' diffs and packages themselves?
I've changed 6 mirrors - from oficcial (ftp.us.debian.org) to local (ftp.mgts.by). I've tried netselect-apt - no result. Still normall speed on 'apt-get update' and terrifying speed on 'apt-get dist-upgrade'.
My several-weeks-ago-installed squeeze KDE is very slow when browsing the files and directories, and also opening applications as compared to my WinXP.
my system is:
Pentium 4
CPU 2.8 GHz
1.5 GB of RAM
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I am now working with squeeze, and my page load time on my Vista laptop, which is working off of a wireless connection, is much faster than my linux desktop, which is a direct connection.
View 5 Replies View RelatedWhile Blender 2.5 may be stable, the Python API is not. According to the Blender website... Note: The Blender Python API has areas which are still in development. The following areas are subject to change. -operator behavior, names and arguments -mesh creation and editing functions.
View 8 Replies View RelatedI'm using Debian-Squeeze, and the command "uname -a" results in "Linux debian 2.6.32-5-amd64 #1 SMP Sat Jul 24 01:47:24 UTC 2010 x86_64 GNU/Linux". The desktop environment is Gnome 2.30.2.
My problem is wireless connection causes the system to crash. Here is the detail: my university uses a WiFi service that we have to enter our ID and password in a certain web page in the browser to get access to the Internet, while the WiFi signal is automatically picked up. My laptop crashes each time I connecting to such wireless network. But back home, when connecting to my own WiFi, everything is all right.
As the only thing I can do when such crash happens is to press the power button to force the computer to shut down, I've gathered no more information till now.
Does anyone know what's wrong and how to fix it?
I recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?
I have one headless squeeze and two notebooks (one squeeze, one lenny).
When I have X (on headless squeeze) on lenny notebook, it is unacceptably slow. Something like it takes 3-10 seconds to redraw window (acroread, iceweasel, possibly xterm.)
It is not so slow when I use squeeze notebook. Yesterday, I upgraded lenny one to squeeze. Then, it is not slow any more!
I'm trying to get a TP-Link TL-WN821N WiFi USB dongle to work. I bought it because I thought it was based on the Atheros ar9170 chip (which is supported in Squeeze), but I've since learnt that it was based on the ar9271, which is only supported from kernel v2.6.36 on. I've read several threads on the subject, but I'm still confused about what I should exactly do. Since it is stuff that can potentially make the partition unbootable, I prefer to ask rather than to tinker.
I've read that upgrading the kernel would do the trick. The Liquorix kernel is especially recommended in one of those threads. However Liquorix only supports Sid and Testing. Apparently, you still can install it by fetching gcc 4.5 from the Sid repository, then install it... I'm a bit wary of screwing things up though... Another route appears to be the compat-wireless tool. I've downloaded the latest 2.6.32 release of compat-wireless (see here), but there's no reference to the ar9271 in the README. Is it appropriate nevertheless (they refer to an online list of supported drivers that was updated after the release... not sure what to make of it)? Otherwise, can I install the so-called "bleeding-edge compat-wireless" with a 2.6.32 kernel? BTW, I know that I'll also need the ath9k_htc firmware to be installed.
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
Alright so I have been having issues with my Wifi, large packet loss, pages take forever to load. here is the cards info if you need any other info let me know. Been googling it and trying things since yesterday with no success Network controller: Realtek Semiconductor Co., Ltd. RTL8188EE Wireless Network Adapter (rev 01)
View 6 Replies View Relatedhow to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedI installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedWhen I activate Tor in Iceweasel, it forbids me access to the internet completely. Even attempting Google results in "Iceweasel is configured to use proxy server that is refusing connection".
I have seen this in Lenny, too - it was caused by activating Tor without having installed privoxy. I installed privoxy and everything was okay. In Squeeze, Tor is using polipo. Polipo is installed and running. I have not played with settings of polipo or Tor, the configuration is the same as it was after installation.
What can be wrong? I am a rather an user than a networking guru. I am connected to internet by means of DHCP, no local lans, no special routings, no additional proxies. I have already tired to reinstall polipo.
I have search the web quite a while about issues with the Intel Dual Band Wireless-AC 7260 Wi-Fi/Bluetooth card. It seems plenty of people have trouble (or at least have had trouble) with it. I do have a working connection, device seems recognized etc, but it works only at a very low/annoying speed.I'm running Wheezy backports and I have firmware-iwlwifi ver 0.43 installed (from Debian testing).
Below is some system output
Code: Select all$ uname -v
#1 SMP Debian 3.14.7-1~bpo70+1 (2014-06-21)
$ dmesg | grep iwlwifi
[ 1.784455] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.809630] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7260-9.ucode
[ 1.809713] iwlwifi 0000:03:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[code]...
I'm not sure why modinfo iwlwifi only lists firmware iwlwifi-7260-7.ucude while in dmesg you see iwlwifi-7260-9.ucude loads.