Red Hat / Fedora :: Boot Failure After Latest Kernel Update (12)?
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
ADVERTISEMENT
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Jan 4, 2011
My computer boots a lot slower after the last kernel update. It boots fine to the log in screen, but after I log in it is slow.
New kernel: 2.6.35-24-generic
View 1 Replies
View Related
Mar 25, 2011
After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?
View 9 Replies
View Related
Mar 3, 2011
So I ran the update manager to install the latest kernel. It goes fine and was sitting at the restart prompt. I was playing minecraft and the entire system locked up - couldn't restart X or anything. Hard restart and I get a multitude of errors mostly dealing with not being able to find things in /dev/... It gives me a command line but I'm lost as to where to go from here to repair my system
View 2 Replies
View Related
May 11, 2011
I have a Macbook Pro 5,5. I had Fedora 14 installed on it, updated to the latest version. I updated the kernel, and performed an update. Now, every time my system starts, it loads up the startup fedora bar, and it gets stuck at the bar being loaded 100%.I press ESC to see what is going on behind the scenes, and I notice that the problem is that atd cannot start up.
View 2 Replies
View Related
Dec 13, 2009
even from a terminal it wouldn't update? Maybe because I put my bootsector as ro ?
I don't know here is the message:
View 4 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Oct 15, 2010
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies
View Related
Jul 18, 2010
I am running the 64-bit version of Fedora 12 on an MacBookPro5,1 Intel Core 2 Duo with 4 Gigabytes or RAM.
I updated my system to use kernel 2.6.32.16-141.fc12.x86_64. Now when I try to boot the machine to that kernel, I'm left with a blank screen except for a blinking underscore cursor in the upper left corner after going through the load progress bar animation that appears at the bottom of the scene when Fedora is booting up.
I have my system configured to use the nVidia drivers for OpenGL 3D acceleration
I have to boot to previous kernel to have a usable system.
What can I do so that the system will boot up properly with the latest kernel?
View 2 Replies
View Related
Aug 7, 2009
It seems today's kernel update has given a few people some difficulty - but my symptoms seem pretty unique.
* I go through GRUB normally. I 'esc' out of plymouth, and watch my services start. I get message 'mdadm: No arrays found in config file'. Don't remember seeing this before, don't have any RAID devices.
* Next, my file-system gets re-mounted in read-write mode (don't know if this is normal or not). Then, my services begin to start-up. My last service is 'crond'. All services start normally. When it gets to 'crond' the [OK] status is never reported. Visually, the screen flickers a few times, stops, then nothing happens. I can type characters though, and they do show up.
* If I then shutdown my computer by pressing the power button, the shutdown procedure begins. 'crond' shuts down successfully (indicating it started just fine), and the computer goes down normally.
* I don't believe this is an NVIDIA issue. I rescue-moded and changed my XORG.conf to the basic VESA driver to eliminate this possibility.
* Worst of all -- No older kernels work now either. They behave in the same way. When I try to boot to other run-levels, no luck either. This tempts me to think the problem might be file-system related and the re-generation of grub.conf threw something off?
View 5 Replies
View Related
Dec 7, 2010
I have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
View 14 Replies
View Related
Aug 10, 2010
I was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
View 10 Replies
View Related
Sep 11, 2009
I have fedora versions
2.6.30.5-43.fc11.x68_64
2.6.29.6-217.2
2.6.29.4-167
loaded on my system. Version 2.6.30.5-43 hangs after the progress bar completes with messges labeled r8169 about the ehternet link status. Version 2.6.29.6-2317.2 boots just fine. How do I remove version 2.6.30.5-43 from the system?
View 9 Replies
View Related
Aug 19, 2009
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
View 3 Replies
View Related
Jan 2, 2010
I juset reinstalled my ubuntu and i can't update to the latest kernel. I'm stuck at 2.6.31-15. Also my grub is v1.94 Beta4 and can't upgrade it to grub2.
View 7 Replies
View Related
Nov 27, 2010
This is old P4 laptop, Intel845G graphics (which I know is very troublesome).However, it works fine with the 2.6.35.22, but the update to 2.6.35.23 kills X during the boot process. Everything else works fine.Anyone else experiencing any difficulty with X and this kernel update?
View 3 Replies
View Related
Mar 13, 2011
Update to latest kernel 2.6.38?
Code:
paneas@paneasbox:~$ uname -a
Linux paneasbox 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux
I want to update my kernel to the latest version from kernel.org, which is the mainline 2.6.38-rc8 .
EDIT: I found this guide [URL].. and I will give it a try
View 1 Replies
View Related
Sep 9, 2010
I tried the following command with no succes (all with sudo):
update-grub
aptitude safe-upgrade
aptitude full-upgrade
[code]...
View 6 Replies
View Related
Jan 10, 2010
I can't go into text mode after latest kernel update. CTRL-ALT-F1 doesn't work. Actually, all CTRL-ALT-F1 to F7 work very strange. For example... When I click CTRL-ALT-F2, it close all my windows and screen flash
View 1 Replies
View Related
Nov 24, 2010
I am running Maverick via Wubi. I just completed a Kernel upgrade and when I restart into Ubuntu it just goes to a Bash prompt. I am not sure exactly what version I updated to so I haven't logged a bug report yet.
View 1 Replies
View Related
Mar 21, 2011
Ubuntu 10.10 latest kernel 2.6.35-28.49 update is broken. update just stalls when it gets to this.Quote:
Sub-process /usr/bin/dpkg returned an error code (1)...generating grub.cfg I have tried the following to no avail..Quote: sudo apt-get install -f sudo dpkg --configure -a sudo apt-get update && sudo apt-get upgrade
I have not changed any hardware.
View 2 Replies
View Related
Sep 1, 2011
I have noticed that my battery-status applet icon, which appears next to the wireless symbol in the notification applet on the menu bar at the top of the screen, only appears for a second or two when I plug in my notebook and then disappears. It does not appear at all when the notebook is unplugged. just noticed this behaviorafter restarting with the new kernel
View 1 Replies
View Related
Feb 14, 2010
opensuse v11.2linux 2.6.31.12-0.1-desktop x86_64The kernel symbol file is still at 2.6.31.3. Apparently the symbol file did not get updated with the rest of the kernel development files. At least one program does not build because of that
View 9 Replies
View Related
Apr 5, 2011
I am using OpenSUSE 11.4 64 bit with GNOME. I also use the Tumbleweed and Packman for Tumbleweed repositories. Accoording to uname -r, my current kernel version is 2.6.37.1-1.2-desktop.
How do I safely update to the latest stable kernel version?
I am new to OpenSUSE. Please provide step by step directions.
View 9 Replies
View Related
Jan 27, 2011
The latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
View 9 Replies
View Related
Nov 23, 2010
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
View 1 Replies
View Related
Sep 12, 2010
I was updating the kernel and left the computer to let it do its business. There was power failure and I don't know if the update completed or if it was in the middle of it. Now if I start the computer, it freezes up at the login screen. I tried to recover from grub, by selecting "Ubuntu, with Linux 2.6.32-21-generic (recovery mode)". There were no prompts for input after this. The recovery screen is not updating anything after:
[2.348886] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[2.349015] EXT4-fs (sda1): write access will be enabled during recovery
[2.577641] EXT4-fs (sda1): recovery complete
[2.578072] EXT4-fs (sda1): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
When I come out of that screen (ctrl-alt-del), the problem repeats.
View 3 Replies
View Related
Jul 14, 2009
I just updated my kernel to kernel-2.6.29.5-191.fc11.x86_64 on my x64 system, after I reboot my machine, the Fedora loading bar comes up and finishes but then no gui comes up. I attempt to issue commands at the hanging prompt that comes up but nothing happens. I can boot into my older kernel just fine but not the updated one.
What can I do?
View 3 Replies
View Related
Aug 10, 2009
The girlfriend did an update a few nights ago. Besides removing her NVidia drivers, it also installed kernel version 2.6.27.29-170.2.78.fc10.i686.
That kernel was causing problems. Now it won't boot at all. How do we remove that kernel altogether?
If we remove it, would simply doing another update from the previous (still working) kernel just try to reinstall that bad kernel?
View 12 Replies
View Related
