I have an Acer Aspire V15 Nitro Black edition, and I recently installed after working so hard Debian 8.2
My problem is that I can't see any WiFi connection...
I believe that the firmware for my card is the ath10k, but I can't install it...
lspci -nn | grep Network
07:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:003e] (rev 20)
I have Acer Aspire 4740 laptop with Atheros ar928x wireless. My wireless is very slow, unstable. Wireless card still works well and fast in Windows (dual booting). After searching I see that there are many Ubuntu users have the same problem in Ubuntu 11.04 with this card.
View 4 Replies View RelatedTo exploit the guessnet capability, I have configured my WIFI so that ifplugd can auto connect WIFI after boot.The access point is hidden, and I have provided all the required info in my /etc/network/interfaces file
mapping wlan0
script guessnet-ifupdown
map default: office-wifi
[code]....
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies View RelatedI am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
View 2 Replies View RelatedBecause of workers here in my company I need a very secure operating system for laptops so I have chosen Debian 7.8. The laptop is Acer Aspire E11 (E3-112-C4NE). This laptop has a built-in wifi card Aetheros AR9565 :
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
lspci -nn
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9565 Wireless Network Adapter [168c:0036] (rev 01)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Basically the stable 7.8 distribution cannot handle this wifi card, so I read on forums that I should upgrade my operating system. So I did as I read on the forum:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
nano /etc/apt/sources.list
deb http://ftp.debian.org/debian wheezy-backports main contrib non-free
apt-get update
apt-get -t wheezy-backports install firmware-atheros
apt-get -t wheezy-backports install linux-image-amd64
reboot
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
After this the oprating system recognized the wifi card and loaded the "ath9k" driver. In the Grub the default operating system became :
Linux 3.16.0-0.bpo.4-686-pae
Because I want to restric the workers to access anything else except the designed inner network, I have uninstalled the Network Manager and set the network interfaces in the "/etc/network/interfaces" file as shown below:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[Code] ....
This works, when the operating system boots, it automatically connects to my hidden SSID wiofi network. I can ping other computers on the same IP subnet (10.139.252.xxx).
This computer should connect to an XP running under virtualbox, having the IP address of 10.40.138.153. But it does not. On another laptop, running Ubuntu 14.05, having the same network configuration, (10.139.252.102) connects to the same XP under virtualbox with no problem....
For Ubuntu nothing is required to be installed on virtualbox, no extension pack, no guest addition, nothing. When I want to connect to XP via rdp, it asks for username and password and after that only a blue or black blank screen and nothing else... Even on the XP I see no sign of any activity that somebody would like to connect.
Checking the network traffic (tcpdump, nast) I see that the two computers are communicating but after a while the communication stops. The rdp XP its in another IP subnet, but Ubuntu can connect without any problem, Debian not...
I've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....
View 4 Replies View Relatedi used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
View 6 Replies View RelatedI'm trying to find out what is the difference between wifi0 and ath0 (atheros wifi card) in terms of packet counters shown in proc/net/dev pseudofile. The fact is that wifi0 and ath0 packet counters are different. I've read that wifi0 refers to the physical device and ath0 refers to virtual device over wifi0, so, as far as I know, packets counters in both devices should be the same, isn't it? Another annoying question for me is that ath0 doesn't show any erroneous packets, while wifi0 does.
[Code]..
I am using an atheros based wireless card. I am able to scan for and find networks but can not resolve addresses:
procyon@debian:~$ sudo ping -I wlan0 8.8.8.8
ping: Warning: source address might be selected on device other than wlan0.
PING 8.8.8.8 (8.8.8. from 10.0.0.7 wlan0: 56(84) bytes of data.
From 10.0.0.7 icmp_seq=1 Destination Host Unreachable
From 10.0.0.7 icmp_seq=2 Destination Host Unreachable
From 10.0.0.7 icmp_seq=3 Destination Host Unreachable
From 10.0.0.7 icmp_seq=4 Destination Host Unreachable
From 10.0.0.7 icmp_seq=5 Destination Host Unreachable
From 10.0.0.7 icmp_seq=6 Destination Host Unreachable
I am having some troubles with my networking. I have a fresh install of Debian 4.0.4-1. My problem is: I boot up and everything is great.
Code: Select all~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:46:4b:ae
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code] ...
I try to switch the hardware switch on and off with no avail. The only way to fix it is to reboot. But then when I ifconfig down and up I'm stuck in airplane mode again.
I have a problem to configure my wifi card, a dwa-110 from D-Link, it is not recognized when I launch System / network device control (only ethernet connections appear), and it is the same thing in Administration / network / network configuration. But if I launch administration / hardware / system devices, the last line is "Ralink 802.11 bg WLAN"... When I try to add in the window "network configuration" (from above) some new stuff, I specifying the kind of hardware (wireless) and when I have to enter the name of the card I don't see my card. On other OSes, I used ndiswrapper, but I wasn't able to install it on CentOS (dependencies required and it's hard with only a USB key to install the stuff...) How to see if the card is recognized, if I have to use ndiswrapper and so on. I have an internal PCI network card also, maybe it is this card which is recognized.
View 2 Replies View RelatedInstalled OpenSUSE 11.4 with XFCE on MSI Wind U90. Unfortunately my RTL8187se buit-in wi-fi doesn't work.Finally found that driver r8180 works. After YAST2 configuration it worked, but after reboot stopped working. I've found that YAST2 forgets my manual configuration of the wifi card (forgets all settings).I've tried to remove card from YAST2 and configure again from scratch, but it forgets all my settings - mainly the module name - r8180, and without this driver network doesn't work!
View 3 Replies View RelatedHow to Configure WiFi on RPiTC2_r1.99 OS at raspberry pi 2 Model B,i have tenda usb wifi dongle model-W311M when we use command "lsusb" then show RT5370 wireless adaptor.i istalled apt-get install firmware-ralink.when i run command "ifconfig" then not show eth0, show other name like enxb827ebcb90 83 wlan0 not show ,there show like wlxc83a35c8151b use command "iwconfig".then show wlxc83a35c8151b not show wlan0
View 1 Replies View Related I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I booted Debian in Live mode on a USB to try to see if the internet will work on my Linux machine before I actually install it (there is some tricky internet software where I live that I must overcome, but that will come in another thread).
Currently I have no WiFi whatsoever. When I go into the internet access menu I only get back the fact that there is a wired connection that's possible (theoretically, I should be able to also see networks to which I can connect to, but I don't). Also, it's impossible for me to actually get a wired connection going, unless I can somehow give it through my Windows laptop.
When I did some research, the people seem to say that I need to update the driver after enabling the use of non-free software; I can't do that since I have no connection in the first place.
The OS recognizes that the PCE exists (I am using asus pce-ac68), when I did "lspci" command it told me I have BCM4360 and BCM43225 chips.
I think I found the drivers here "[URL] ......" but I don't think my chip is listed there (there is no BCM4360 or BCM43225 on that list). What to do with those drivers, I mean how to compile them and install them on a Debian machine, and I'm not sure I can even install them on a live boot (but I want to make sure my internet works on the live boot before I actually install the OS).
I just installed Debian on my hp dv6205us. I have a bcm94311mcg Bradcom wireless card that is not detected. How do I get this working?
View 3 Replies View RelatedMy pc is aser aspire 5735z. I have acer nplify 802.11b/g draft-n wlan
but i can use wifi on debian
what i have to do ?
Do i need driver or firmware?
how can i solve this problem ?
I have some problems with my WiFi card I'm configuring for Debian Wheezy. I've used it in other computers successfully (It's a USB device), but this box doesn't seem to be able to recognize it or use it properly.
I've identified the card using Code: Select alllsusb with the output Code: Select allBus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
I've used the Wheezy docs to download the firmware necessary and it apparently is supposed to run fine with this firmware, but nothing is working. There was mention to a GitHub repository of a fixed version of the driver in question, which didn't work either.
10.04 Gnome desktop install on Acer Aspire One netbook, wifi connection very unstable since last round of updates, wondering if ndiswrapper would work better
[Code]...
Just moved from Mandriva 2010.1 to Ubuntu 10.10 and am having problems with the wifi. It connects fine, but tends to grind to a halt every now and then. I always have this problem with Ubuntu... hence me migrating to Mandriva in the past. My card uses the Atheros AR5007G Wifi chipset. So, using ndiswrapper, I installed the windows drivers. Everything seemed to go okay. Yet, after a restart, I'm having the same problem. Which makes me think I'm still using the same old driver. So I added blacklist ath_hal and blacklist ath_pci to /etc/modprobe.d/blacklist.conf. Restarted. And I'm still having drop-out problems.
ndiswrapper -l
net5211 : driver installed
device (168C:001D) present (alternate driver: ath5k)
In my laptop, after upgrade, wifi stop working.My laptop is Fujitsu-Siemens Amilo Pro V2065, wifi cart Philips 12127e (from IBM T41), linux kernel: 2.6.37-020637rc3.This card worked before upgrade, and work on windows Command lshw -c network return:Quote:
*-network:0 UNCLAIMED
description: Ethernet controller
product: AR5212 802.11abg NIC
[code]....
I did a netinstall earlier today (latest version, amd64) on my Dell XPS laptop and ended up with a minimal installation because I couldn't connect to the internet. Now I'm trying to get online without a desktop environment.
I have an Intel Centrino 1030, so I downloaded and installed the firmware [URL].... with a usb, then rebooted. My searches have turned up a lot of instructions involving a utility called iwconfig and wpasuppliant, but these are apparently not installed. I don't really know much about it, but my /etc/network/interfaces file looks rather empty:
Code: Select all# The loopback interface
auto lo
iface lo inet loopback
Shouldn't there be something like wlan0 there? The network card does show up with lspci
I'm was trying to choose between GNOME and KDE for version 8. However both the live DVD's fail to pick up the Wifi card on my system. I am also unable to use certain basic commands such as ifconfig on the live CD. I am completely new to Linux and Debian (of course). Pardon me for the hand holding. This will be my first install of a Linux system.
What steps I can take to ensure that the Wifi card and the network card will be supported - hardware compatibility test maybe? Is there a way to try before installing? This will be a dualboot with Windows 8.1
Wifi card: Ralink RT3290 802.11bgn Wi-Fi Adapter
LAN card: Realtek PCIe GBE Family Controller
I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
Some information from my system :
Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0 Link encap:Ethernet HWaddr 14:58:d0:09:72:bd
inet adr:130.125.57.144 Bcast:130.125.57.255 Masque:255.255.255.0
adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0
[Code] ....
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
I have an intel 7265 AC wireless card. When I try to download something my estimated download time is tripled almost every 5 mins.And when I play an online game from steam (cs:go or dota2) the ping goes to 250-300 ms which generally stays around 80ms. I'm using debian jessie. So far, I've tried turning of the power save mode of the card, changing ISP and router but none of them worked. I have a fairly good internet connection (I'm using it with my other machines without a problem) so I don't think the connection or router is the problem. Below you can find some information about system.
Code: Select all$ lspci | grep Network
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
Code: Select all$ dmesg | grep iwlwifi
[ 9.236494] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 9.750780] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
[ 9.750971] iwlwifi 0000:03:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
[ 9.896465] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 9.896516] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[code]....
Those are the outputs of the commands I know.
I am trying to get an engenius EUB 9801 going in Debian 6.0 Stable. I have searched this forum, and other linux forums but no luck. It is based on a Ralink rt3572sta chip, the 2.4/5ghz 300mbps wireless N chipset. I will post the link to the Ubuntu forum, where they have been able to get it working under 10.10.[URL]..the link to the linux chipset driver is:[URL]... It would be nice to have this natively supported under Debian, as I am going to use my server as a glorified wirelessN router...
View 11 Replies View Relatedhow to display the modules related to my wifi card, using lsmod all the kernel modules are displayed but I would like to display just the related to my wifi, is there a way to do this?
View 2 Replies View RelatedLast night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).
Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?
[Code]...
I have an Atheros ar2427 chip in my Asus EEE 1001P and I'm using WICD to configure it. I can scan for wlans, but I can not connect. I installed the compat wireless package from yast and I downloaded the source from the compat wireless site and tried to compile it (which seems to be the solution for Ubuntu) but I got an error and an interesting warning
Code:
Linux linux-0yl2.site 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
[code]....