Ubuntu Networking :: Kernel 2.6.32-23 Killed Wireless?
Jul 20, 2010
A quick note for other frustrated Ubuntu users out there. I have a D-Link DWA-510 PCI wireless card (RT61) that just stopped working. After wasting hours searching posts and asking for help, I've determined that there's a problem in the latest Kernel to be rolled out.
I have now installed StartUp-Manager, and used it to boot into the old 2.6.31-22 kernel still on the machine and, hey presto, wireless is working again. It seems like the simplest fix by far.
View 2 Replies
ADVERTISEMENT
Jul 24, 2010
A kernel update just killed my ATI graphics driver.
Trying to install proprietary graphics driver fails and points at /var/log/jockey.log
This ends with
Code:
If I can't sort this out I'll have to try rebooting into the old kernel to get the graphics driver back. The dreadfully slow scrolling in the browser is starting.
View 5 Replies
View Related
Apr 28, 2010
from Ubuntu 8.04.2, kernel 2.6.24-24-lpia to Ubuntu 8.04.2, kernel 2.6.24-27-lpia Drivers Lost / Missing: Wireless via USB, Printer, Webcam, Sound, etc. No indication whatsoever there would be problems with the upgrade except for the changes in /boot/grub/menu.lst which I merged by hand to avoid problems.
Please advise:
A) What to do next?
B) Where in the Ubuntu bugs do I open this bug?
View 9 Replies
View Related
Mar 24, 2010
I am experiencing the "slow internet" problem (mentioned multiple times in these forums) but it started exactly when I ran an online update, which switched my boot image from vmlinuz-2.6.31.12-0.1 to vmlinuz-2.6.31.12-0.2. Perhaps a setting somewhere got overridden? When the update occurred, grub couldn't find the OS because it had the wrong version #, and I manually edited it (via a livedisk) and that fixed it; it also switched my vga resolution in the grub conf. OpenSUSE is *acting* like ipv6 is enabled again, but ifconfig doesn't report that, and my MTU is close to 1500.
View 6 Replies
View Related
Jan 27, 2011
The latest Kernel update (2.6.35-25-generic) killed all my sound output on my Toshiba Satellite M115.
I tried reinstalling all ALSA components and plugins. No luck there.
Rebooting into 2.6.35-24-generic fixes the problem, in that my sound works again.
View 9 Replies
View Related
Feb 4, 2010
Last night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).
Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?
[Code]...
View 2 Replies
View Related
Jan 8, 2010
I have an HP mini 110. In order to get my wireless working I had to use a fix with broadcom, sadly I don't know exactly what I did to finally get it working. My problem is that in fixing my wireless, my mic died. I'm not the most advanced with Linux so I have no idea as to why this may have happened. I have seen that this is a reoccurring problem that continues to not be addressed.
View 3 Replies
View Related
Nov 23, 2010
I recently updated my kernel and now can no longer tether my iphone to my openSUSE11.3(x64) laptop. Before the update I could tether.Same machine dual boots to Win7-64bit and can tether just fine.I re-installed the libimobile packages, but my linux no longer recognizes the iphone as a network device.t DOES pop-up some boxes asking if I want to play the media, or view the photos on the iPhone - so that part is working
View 1 Replies
View Related
Dec 8, 2010
I just installed current to my Acer Aspire one 110 netbook that wasrunning 13.1 just fine until this morning. Everything works except the wireless connection. I cannot set the wlan device to go "up", iwlist scan returns "network is down" and ifconfig wlan0 up returns "Operation not possible due to rf-kill".Using the hardware switch makes no difference (it was working before upgrading). I made a clear install. The wlan devices uses the ath5k driver.
Edit: I installed the madwifi driver and nothing changed. After following a "google suggestion" to remove all power from the netbook and try again i can connect using the madwifi driver but not using the ath5k. Still I cannot get the switch to work.
View 10 Replies
View Related
Jan 16, 2010
Im on 9.04 and i upgraded to the latest kernel. Pretty much a default .config for a kernel few things here and there removed. When i boot into the kernel and go to connect to the wifi it shows enable wireless grayed out and enable networking checked.
View 1 Replies
View Related
May 18, 2010
i created a sample module and while trying to insert it i am getting the message "Killed". But when I did lsmod my module was listed out there and was 'Used by' 1. Maybe because it is in use I cannot do a rmmod on my module. How to overcome this, that is do a rmmod while it is still in use?
View 3 Replies
View Related
Jan 20, 2010
I am writing this using the 2.6.31-17 generic kernel after rebooting and selecting NOT to use the 2.6.31-18 kernel which was just installed. The newer kernel would not recognize/activate my Atheros AR2418 wireless adapter and, when I connected to the ethernet and did updates, there were no hardware drivers available. I haven't needed proprietary drivers since I upgraded to 9.04 and 9.10 works fine with older kernel.
View 1 Replies
View Related
Nov 6, 2010
How can I get information similar to proc/net/wireless but for more than just the wireless router I'm connected to. I know there has to be a way because when I'm disconnected from all routers the network manager shows signal strength of all available routers.
View 3 Replies
View Related
May 14, 2011
I'v tried to uninstall and reinstall wubbi 4 times already. Before the OS even start up it says that it cannot find the wireless kernel and then it boots me up into that start up with the *configuration wizard* and that fails as well and asks me to reboot.How can i get my wireless transfered to Ubuntu without using a flash drive or CD? I thought that Ubuntu would automatically detect my wireless but i see no options as such.
View 2 Replies
View Related
May 1, 2010
what is name of modules in kernel for wireless and lan driver ?
View 1 Replies
View Related
Aug 30, 2010
I have problem with my laptop, the last week I update my kenel to 2.6.32-24-generic-pae and in this moment the wireless drive dosen't work.
View 1 Replies
View Related
Sep 16, 2010
I was able to successfully install the drivers on the generic kernel, but I seem to be having a problem getting it done on the real time kernel I downloaded via the Ubuntu Software Center. Here's what shows up when I type in 'make' at the command line:
Quote:
/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625$ make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.31-11-rt/build M=/home/marcoharder/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 625 modules
[Code].....
View 8 Replies
View Related
Aug 23, 2010
I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network:
*-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
View 9 Replies
View Related
Sep 22, 2010
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
Here is the details of my system:
Dell inspiron 1520
lspci (snipped)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
[code]....
View 1 Replies
View Related
Oct 1, 2010
I just upgraded the kernel on my Ubuntu laptop from 2.6.32-24-generic to 2.6.32-25-generic (using the update manager under gnome). After the update, the wireless network controller shows up as UNCLAIMED when I do lshw -C network.When I try to install the driver with the commands sudo modprobe lib80211 sudo insmod wl.ko
i get this error message: insmod: error inserting 'wl.ko': -1 Invalid module format
I have compiled the driver using the 2.6.32-24 kernel. Do I have to re-compile with the new kernel?I'm a unix user, but not a kernel hacker, so I'm wondering if I will run into problems every time I get a kernel update? Or is this problem an exception?
View 1 Replies
View Related
Feb 23, 2011
I am having some issues getting the broadcom sta driver installed on Kernels 2.6.36 up through 2.6.38.
Before I continue, I'll list my specs
Release: Xubuntu 10.04.2 LTS (64-Bit)
Wireless Card: Broadcom BCM4328
Kernel: 2.6.38-x (Any version), and 2.6.36 and above
EDIT: Yes! Yes! I got it to work, for those that are having issues, install this packages. Disregard that it says that there is an older version available in a software. The bcmwl-kernel-source for Natty works on Lucid![URL]... Install one of these and check your Hardware Drivers, they will probably say that the Broadcom STA driver is installed but not in use. If you then proceed to restart it should be up and running, this way you can use kernels 2.6.36+ and still use the Broadcom STA driver!
View 1 Replies
View Related
Mar 7, 2011
I made a custom kernel for maverick, 2.6.35-27. And I want to get the latest Intel 5300 wireless card drivers working. The wireless works now, but I want to get these installed anyway. I've been on a custom compilation kick for a while, and just been wanting to do everything compiled myself, just to learn a lot. Including putting linux on my WNDR3700 router using DD-WRT. Still doing a lot of customization on that as well.
View 1 Replies
View Related
Jan 30, 2010
I've been connecting to the Internet via Ubuntu 8.10 on my Toshiba laptop fine for ages now, but today it has stopped working. Yesterday an update came through relating to DHCP and, like all other updates, I installed it. And now my laptop can see the wireless router but it cannot connect to the Internet. (As I always install the recommended Ubuntu updates I didn't look closely at exactly what the update said, but I did see DHCP in the title, so this is why I suspect my connection is now broken.) Or can anyone tell me how to undo yesterday's update? I really wish now that Ubuntu had a utility similar to Windows System Restore.
View 2 Replies
View Related
Feb 25, 2010
Some data:Attached because on posting I get an error even though there is not a singel image or smiley:You have included 11 images in your message. You are limited to using 8 images so please go back and correct the problem and then continue again. Images include use of smilies, the BB code [img] tag and HTML <img> tags. The use of these is all subject to them being enabled by the administrator.Couldn't upload either it gives invalid file so I resort to Google docs now [URL]
View 9 Replies
View Related
Jun 21, 2011
I just had the great pleasure of switching from standard DSL to BT infinity (fibre optics) which included switching my DSL Belkins router for a new cable BT home hub unfortunatly. My PS3 went online wirelessly fine, all our iPads/Pods/Phones went on ok wirelessly and 2 out of 3 wired Ubuntu 11.04 desktops went online ok. I also have a Macbook dual booting 11.04 but haven't tried it yet. The problem is my computer which is wired the same isn't working, I can get it to say connected sometimes and UbuntuOne did say it was updating a file but then cuts out, I just can't seem to get connected to the internet!
I didn't change anything from the previous day, just switched it on. The only significant difference I can think of between my computer and the other desktops is mine has the KDE desktop installed.
Things I've tried:
- Restart router
- Boot into different DE eg. normal, classic, KDE
- Unplug ethernet cable and plug it back in
- Restart computer
My computer is connected using the powerline system along with 1 of the other desktops so it can't be that, it must be something at my end.
View 4 Replies
View Related
Jun 8, 2011
I upgraded from kernel-2.6.38.6-27.fc15.x86_64 to kernel-2.6.38.7-30.fc15.x86_64. After the upgrade I no longer have a wireless interface in Network Management. I have a broadcom BCM4312, booting the previous kernel solves this problem.
View 9 Replies
View Related
Feb 18, 2009
I've only used Linux for about a year or two now and have worked through suspend esume and WPA wireless issues with CentOS and my T61p. However, I'm stumped on this one. why my T61p freezes randomly (happened once while writing this topic) with the caps lock light blinking. I'm wondering if it has something to do with my nVidia driversettings andor using my wireless card and/or switching between home wwireless and work wwired connection.
[Code]...
View 11 Replies
View Related
Aug 23, 2009
I wireless network card is Broadcom Corporation BCM431, but is doesn't work after I update kernel from
2.6.29.6-217.2.7 to 2.6.29.6-217.2.8.
Linux localhost.localdomain 2.6.29.6-217.2.7.fc11.x86_64 #1 SMP Fri Aug 14 20:53:08 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Feb 6, 2011
Just installed 11.3 on a older Dell Dimension 8200 with a D-Link DWA-160 N dual band USB card. The install went ok and the card works (seems a little slow right now but that is next on the list). However, when I run YOU I get the following conflict:
"compat-wireless-kmp-default-2.6.37_k2.6.34.0_12-17.1.i586 requires kernel (default:drivers_usb_core)=6faa2c62dac4f41d, but this requirement cannot be met. Uninstallable providers: kernel-default-base-2.6.34-12.3.i586[openSUSE-11.3 11.3-1.82]"
when the system wants to install patch:Kernel-3038.noarch and patch:Kernel-3709.noarch. I cannot seem to find a suitable provider for the default:drivers_usb_core. Is this something to address here or do I need to go to [URL]?
View 1 Replies
View Related
