Debian :: Installing The Wifi For Atheros?
Feb 8, 2010
i used to have shaw cable that i paid for and with that a "wired" connection which no matter what linux i chose to play with would recognize and automatically install the network drivers etc... so that i could access the web. now though i use a connection via wifi in the hotel that i now reside at and when i install or use live cd versions of linux i cant get it to use my wifi. due to the fact i have an atheros card. i researched this and found that apparently i need to have mad wifi installed and configured. however i haven't been able to get it to work. i can't seem to get an accurate step by step on installing it. same when i step by step try to install linux onto a usb stick and have it bootable. furthest i've gotten is the start up splash screen and then it freezes. anywho can someone steer me towards the "easiest dumbest person using it" install madwifi and or get a copy that works for an atheros card.
View 6 Replies
ADVERTISEMENT
Dec 16, 2015
I have an Acer Aspire V15 Nitro Black edition, and I recently installed after working so hard Debian 8.2
My problem is that I can't see any WiFi connection...
I believe that the firmware for my card is the ath10k, but I can't install it...
lspci -nn | grep Network
07:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:003e] (rev 20)
View 3 Replies
View Related
May 14, 2011
I have Acer Aspire 4740 laptop with Atheros ar928x wireless. My wireless is very slow, unstable. Wireless card still works well and fast in Windows (dual booting). After searching I see that there are many Ubuntu users have the same problem in Ubuntu 11.04 with this card.
View 4 Replies
View Related
May 15, 2010
i installed ubuntu on my friends laptop but when he tries to connect to his network and enters his wep key the box disappears for a few second and comes back again...The card is Atheros on a Toshiba laptop and it is detected , it finds the networks but the wep key is rejected every time without a error
View 5 Replies
View Related
Oct 12, 2010
10.04 Gnome desktop install on Acer Aspire One netbook, wifi connection very unstable since last round of updates, wondering if ndiswrapper would work better
[Code]...
View 5 Replies
View Related
Oct 13, 2010
Just moved from Mandriva 2010.1 to Ubuntu 10.10 and am having problems with the wifi. It connects fine, but tends to grind to a halt every now and then. I always have this problem with Ubuntu... hence me migrating to Mandriva in the past. My card uses the Atheros AR5007G Wifi chipset. So, using ndiswrapper, I installed the windows drivers. Everything seemed to go okay. Yet, after a restart, I'm having the same problem. Which makes me think I'm still using the same old driver. So I added blacklist ath_hal and blacklist ath_pci to /etc/modprobe.d/blacklist.conf. Restarted. And I'm still having drop-out problems.
ndiswrapper -l
net5211 : driver installed
device (168C:001D) present (alternate driver: ath5k)
View 1 Replies
View Related
Nov 27, 2010
In my laptop, after upgrade, wifi stop working.My laptop is Fujitsu-Siemens Amilo Pro V2065, wifi cart Philips 12127e (from IBM T41), linux kernel: 2.6.37-020637rc3.This card worked before upgrade, and work on windows Command lshw -c network return:Quote:
*-network:0 UNCLAIMED
description: Ethernet controller
product: AR5212 802.11abg NIC
[code]....
View 4 Replies
View Related
Feb 4, 2010
Last night I installed F12 x86_64 from a liveUSB in my laptop with Atheros wireless. During the install process and after the first boot I was able to surf the web connected to the wireless network (signal was good and all). After I updated the whole system, however, the wireless network is no longer available (Network Manager does not even show the Wireless interface or the network list).
Obviously a laptop without wireless is mostly worthless. What am I supposed to do to get my (perfectly working*) wireless network back?
[Code]...
View 2 Replies
View Related
Oct 29, 2010
I have an Atheros ar2427 chip in my Asus EEE 1001P and I'm using WICD to configure it. I can scan for wlans, but I can not connect. I installed the compat wireless package from yast and I downloaded the source from the compat wireless site and tried to compile it (which seems to be the solution for Ubuntu) but I got an error and an interesting warning
Code:
Linux linux-0yl2.site 2.6.34-12-desktop #1 SMP PREEMPT 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
[code]....
View 6 Replies
View Related
Jun 25, 2010
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
View 2 Replies
View Related
Jul 28, 2010
Previously my wifi has worked just fine in 10.04, but as of recently I keep losing my connection after leaving my laptop on for a while (and this happens sooner and sooner each time, used to be daily, now it's every few hours), I can no longer see any networks at all, and I have to reboot to get it working again. I haven't even installed or removed any packages lately, so I'm not such what might've caused this to break all of a sudden.
View 7 Replies
View Related
Mar 10, 2011
i'm running Ubuntu 10.10 32-bit on an Acer Aspire 3050 laptop with an Atheros AR5BMB5 WiFi card.
The problem i'm having is that the hardware switch to turn the WiFi on and off isn't working right. When I hit the switch to turn it off, the light doesn't turn off, and Ubuntu just disconnects from the network and searches for more WiFi networks - it doesn't say that the WiFi has been deactivated, and I don't think it is. When I hit the switch again, it finds my network and connects to it.
The lspci -v | less command gives me the following information for the WiFi:
Code:
08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Subsystem: AMBIT Microsystem Corp. Device 0418
Flags: bus master, medium devsel, latency 168, IRQ 21
[Code]....
It lists a different model of card, but it's using what I assume is the correct driver, so I don't know if that has anything to do with it. I've checked the card itself and it is a AR5BMB5.
I would like to fix it so the switch actually turns the WiFi off instead of just making it search for more networks (I assume it's not actually turning off), and perhaps make the light turn off as it should as well.
View 6 Replies
View Related
Sep 17, 2010
So I decided to wipe out Windows and try Slitaz. It's an awesome well featured distro for it's size. One huge problem tho: I can't get wireless to work for the life of me. I actually went as far as to manually load the ath5k module but It just refuses to recognize my wireless router, much less any nearby routers. It simply doesn't see anything when it scans for wireless networks. I have no problem with that in Puppy Lucid. But I'd really like to use Slitaz, just for it's small size and quick bootup. Can anyone PLEASE help me with that?
PS: It happened here before that I had to plea and beg for any response, so PLEASE(!!) don't let me hang like that this time.
View 4 Replies
View Related
Apr 16, 2010
I have a brand new ASUS EEE PC 900HA with Ubuntu 9.10 installed on it. The wireless hasn't worked yet but the ethernet is fine. I've been browsing the forums for hours to find a fix but now I've installed/queried/removed so many things I'm totally confused.
lspci -v gives me this
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8324
Flags: bus master, fast devsel, latency 0, IRQ 27
[code]....
View 9 Replies
View Related
Aug 20, 2010
I'm trying to find out what is the difference between wifi0 and ath0 (atheros wifi card) in terms of packet counters shown in proc/net/dev pseudofile. The fact is that wifi0 and ath0 packet counters are different. I've read that wifi0 refers to the physical device and ath0 refers to virtual device over wifi0, so, as far as I know, packets counters in both devices should be the same, isn't it? Another annoying question for me is that ath0 doesn't show any erroneous packets, while wifi0 does.
[Code]..
View 6 Replies
View Related
Jun 10, 2010
install my atheros 9285 wireless card driver in backtrack 4 in vmware i am pretty new to linux and have been playing with various linux commands to see if i can get more familiar with linux. I have downloaded a linux driver for atheros card but dont seem to be able to install it could some one please advize on where to download the correct driver for my card and how to install it any help will be very much appreciated ps i have been following various guides and downloaded a driver but cant get it into the root directory of linux in vmware or inst airmon-ng comes back with no interface still
View 1 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
May 29, 2010
I have recently installed Squeeze on my 2009 Acer Aspire laptop and updated the wifi firmware and still do not have wifi connection, I wasn't too concerned as I thought I would just use a usb wifi adapter however it doesn't work with that either, yet that same adpater works with Squeeze on my 2007 Desktop computer
View 10 Replies
View Related
May 26, 2011
I installed Debian awhile ago, but then replaced the mobo. Now my system doesn't detect the onboard LAN card, installing the windows driver fixed that problem on windows but I can't seem to find the appropriate driver for Linux.
The card is an Atheros 8151.
The problem is that my install of linux (64bit) does not recognize any adapter on the system. I went and downloaded a driver, after a make, make install, and reboot it still wasn't fixed.
I can find on this recommends downloading from some partner.atheros.com which seems defunct.
View 1 Replies
View Related
Mar 29, 2011
I am preparing to install Debian. I use an USB-adapter for wireless network access, the chipset of the network card in the adapter is "Atheros AR9271". Using this adapter is my only means of accessing the internet.
For some reason I had a hunch that my adapter might not be supported in Debian. I started searching around and found that quite a few people have been having some difficulties installing it to work in Debian. So, when I will have installed Debian there seems to be a significant risk I won't be able to go online.
Since I don't have any other way of connecting to the internet, thus no other network card and no parallel computer to use, I will get in trouble when I have to try to get my adapter to work with Debian. That is to say, it will be impossible to search for solutions on Google, ask for help online etc. I want to forestall such a situation. Hence a few questions:
1) What exactly will I have to do in order to be able to use the adapter with Debian?
2) Is there any way of doing it without going online after I have finished installing Debian? I'm thinking about if it would, for example, be possible to include any required files in the installation package I will use to install Debian?
View 2 Replies
View Related
Jun 25, 2011
I've installed Debian for the first time, and am excited to use it. However, it's asking me for a username and login. I haven't configured anything related to that yet, since I haven't started using Debian yet. Is there a special username and login I am supposed to know?
View 14 Replies
View Related
May 15, 2010
I am attempting to install Debian 5.0 amd64 to my Toshiba laptop, which has an Atheros AR8131 Gigabit network card.Unfortunately the installer is not finding the card. I have downloaded the Linux drivers for my card to a USB drive. When I tell the installer to load the drivers from removable media it is telling me that it is not able to read the files. I am guessing that I either need to place the files into a particular named directory or I have the wrong file format (currently a .tar)
View 11 Replies
View Related
Aug 20, 2015
I am having some troubles with my networking. I have a fresh install of Debian 4.0.4-1. My problem is: I boot up and everything is great.
Code: Select all~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:46:4b:ae
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code] ...
I try to switch the hardware switch on and off with no avail. The only way to fix it is to reboot. But then when I ifconfig down and up I'm stuck in airplane mode again.
View 4 Replies
View Related
Jan 22, 2010
whether debian lenny can default detect intel pro wireless and atheros?
View 7 Replies
View Related
Mar 13, 2011
Anyone knows what is the right driver for this device? It is not being recognized by the system, and there is no Atheros AR9271 on url
View 9 Replies
View Related
Apr 19, 2015
I am using an atheros based wireless card. I am able to scan for and find networks but can not resolve addresses:
procyon@debian:~$ sudo ping -I wlan0 8.8.8.8
ping: Warning: source address might be selected on device other than wlan0.
PING 8.8.8.8 (8.8.8. from 10.0.0.7 wlan0: 56(84) bytes of data.
From 10.0.0.7 icmp_seq=1 Destination Host Unreachable
From 10.0.0.7 icmp_seq=2 Destination Host Unreachable
From 10.0.0.7 icmp_seq=3 Destination Host Unreachable
From 10.0.0.7 icmp_seq=4 Destination Host Unreachable
From 10.0.0.7 icmp_seq=5 Destination Host Unreachable
From 10.0.0.7 icmp_seq=6 Destination Host Unreachable
View 2 Replies
View Related
Mar 14, 2016
I made the debian installation 8.3 more adapters wi fi and cable do not connect to the network ... How I could solve this?
View 0 Replies
View Related
Apr 7, 2016
I don't know how to make my Wifi Card Qualcomm Atheros QCA9377 to work on my Debian Jessie.
I found driver here: [URL] .....
Tintumon2 said it work for him on Ubuntu 14, but how can I make it to work on Debian?
@update:
When I try to install them on Debian using "./install.sh" I see black screen and then GNU/Linux reboots.
View 4 Replies
View Related
Aug 20, 2010
I just want to try to kde plasma desktop. After I install it, I restart and log in with KDE, then I realize the wireless is disable or to be more specific it couldn't detect any. The same goes for my Gnome after I install kde. But when I remove kde, the problem is gone. Using Ubuntu 10.04.
View 6 Replies
View Related
