Fedora Hardware :: F13 Does Not Recognize Broadcom BCM57780 Ethernet Card
Sep 18, 2010
I've just installed F13 on Acer Aspire 5551G with has Broadcom BCM57780 ethernet card. And F13 does not recognize this card: in System > Administration > Network Devices tab is empty (but in Hardware tab the card is listed). So, I can't connect to the Internet
So far I've found:
1) Related bug for F11.
2) Related thread for F12.
I've tried all possible solutions mentioned in both the bug and the thread, but nothing could convince my F13 to like the ethernet card.
View 1 Replies
ADVERTISEMENT
Nov 18, 2009
I have an issue, this issue to be exact: [URL]. My broadcom BCM57780 is not detected. I just download Fedora 12 today and was happy to get it up and running. The bug report says it was fixed in f11, but it does not appear to be working in F12 either. I tried both the i686 and x64 live cd's and neither find the Ethernet adapter. I would really love to get my new computer up and running without having to buy another Ethernet card to do so.
View 5 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
Jan 17, 2011
I had F14 up and running as a server working awesome. I shut it down and moved it. Now on start up, system doesn't seem to recognize my ethernet card...eth0. How to get my ethernet card back online?
View 14 Replies
View Related
Feb 12, 2010
I am running openSuse 11.1 64 bit on my hp pavilion dv6458se; and am unable to get my Broadcom wireless card to work.
i tried reading a few forums, but they all start when 'lspci' recognizes the card.
My problem is that 'lspci' does not show any 'Broadcom' card.
I have given below the output of 'lspci' for your reference.
View 4 Replies
View Related
Nov 29, 2010
Here are the specs for the computer in question:
Distro: Mint 10 Julia Gnome
Dell Inspiron 1100
2.40 ghz Intel Pentium 4
8 kilobytes primary memory cache
512 kilobytes secondary memory cache
20 GB HDD
1 Gig MB RAM (2 512mb sticks)
Linksys Wireless-G Notebook Adapter WPC54G V3
CDRW/DVD Optical Drive
From the title of this post, you can see that I am having some trouble getting the Linksys Wireless-G broadcom card working. I have been doing some research and have heard that getting a broadcom card to work in Linux can be a real pain.
I have verified that Mint 10 recognized PCMCIA so I am good there. I installed Wifi-Radar to see if maybe it would recognize it but it did not.
When I type iwconfig, it does not show any wireless signals available. When I originally set up the partitions for this laptop, I used PartedMagic and was able to quickly set up the network on that with vertually no problem what so ever.
View 6 Replies
View Related
Sep 15, 2010
I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.
I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?
View 3 Replies
View Related
May 3, 2011
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies
View Related
Aug 3, 2011
Since there is no "Additional Drivers" app in Fedora like there is in Ubuntu, how the heck can I install the Broadcom STA drivers from the Live CD without using an Ethernet cable? And how the heck can I ensure that they stay installed, even after installing Fedora? I suppose putting the RPM on a USB Flash Drive will work, but that's the only thing I can think of... And is there an RPM out there for this specific driver?
View 8 Replies
View Related
Oct 25, 2009
The Network manager didn't recognize my eth0 device as a maned device.In shell I can use my eth0 but not by Gnome Network Manager.My device is nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) and I'm running a Fedora 11. On previous version like, Fedora 10 an 9 this board was managed normally by network manager.Anyone already set up this board on Network Manager ?My Notebook is a HP dv2736us and I'm using a Fedora 11 64bits.
View 6 Replies
View Related
Jul 11, 2009
I have a Dell-made, Broadcom-based wireless card, BCM4322. I'm using Broadcom's proprietary drivers from RPM Fusion.
Code:
lspci | grep -i broadcom
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
Since installing F11, I can no longer connect to WEP-secured wireless. When I use automatic IP settings, the connection simply times out. When I specify an IP, Netmask, Gateway, and DNS server, NetworkManager thinks the connection properly established, but any pings time out, even when I don't specify a hostname (just an IP address). I can connect to (and use) unencrypted wireless. I haven't tried other encryption schemes. The WEP index is 1 and it's non-authenticated (open). I've been playing with the settings for over a week now with no success.
View 6 Replies
View Related
Sep 1, 2009
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
View 14 Replies
View Related
Dec 25, 2010
I'm thinking of installing Fedora 14 on my hp laptop, and need to know if this will support the Broadcom 4322AG wireless card it came with, will only probably use Fedora if the card is already recognized, or an easy gui install. This is the game changer between using fedora or linux mint for me
View 1 Replies
View Related
Feb 8, 2011
I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
View 2 Replies
View Related
Nov 22, 2010
Do I need to install drivers or something to get it to recognize that my laptop is equipped with wireless? It's a Toshiba Satellite L505-S5990.
View 9 Replies
View Related
Jun 6, 2011
im new in all this, i already found a lot of drivers for my pc but this is annoying me xD fedora does not recognize sd memory/card
View 1 Replies
View Related
Mar 16, 2011
I have been trawling the web looking to see how to get my broadcom nic working on my Dell optiplex 380 with fedora 12. Basically it shows up when I run lspci but no where else, unfortunately I have no linux experience. Other things that I have tried were to check the blacklist driver file, which had no reference to the nic.
View 3 Replies
View Related
May 27, 2011
How to use the BRCM driver for this following wireless cards?
BCM4313
BCM43224
BCM43225
Seems the since the 2.6.37 kernels it would be included. And wouldn't be necessary to use Broadcom STA linux driver anymore.
View 2 Replies
View Related
Dec 10, 2010
I have installed linux on my system. I have connected two ethernet cards in the CPU. I have then connected one cord to one card from the modem. Its working fine. I have connected another cord from the second port to the switch and there by from switch to other systems. However the system is not detecting the second card. I am a newbie to linux and I don't know how to configure it.
View 3 Replies
View Related
Jun 5, 2010
Fedora-13 will not play sound. It's definitely a kernel issue and I am not the only one from what I read elsewhere. Prior to kernel 2.6.28 audio works on this Samsung Q1 Tablet PC. Any kernels from 2.6.28 onwards will not recognize my sound card and therefore won't play sound no matter what. I've proved it running different livecds (Suse, Mandriva, PCLOS, etc.) with kernels 2.6.25, 2.6.27, etc., all with audio. How can I use/import a suitable kernel for Fedora-13 so that it will recognize my sound card (driver snd-hda-intel) on this Q1?
View 2 Replies
View Related
Aug 13, 2009
Is there a command to turn off my Broadcom wireless card to save power. In Apple, the have an Airport off listing under the airport menu, Is there something for Fedora?
View 3 Replies
View Related
Nov 25, 2009
I have had a Broadcom Corporation BCM4318 since Fedora 10. In addition, both Fedora 10 and 11 wouldn't recognize the card with out third-party drivers. I was pretty excited when I booted the 12 Live CD and it recognized it at boot.
Since this is my lab box I thought its time to give Fedora 12 a try.
I did an DVD upgrade from 11 to 12 and rebooted. The Broadcom came up fine this time. I did a yum upgrade to finish from whatever was not on the DVD and rebooted. This time no 'b43' network card was recognized. I still had my third part driver files so I:
b43-fwcutter -w /lib/firmware/ ./broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o
and a 'modprobe b43' and I had my card back.
I am sorry for dragging this out this far, but now every time the Fedora 12 box reboots I have to type in modprobe b43 to get my card to work. I did not have to do this for neither Fedora 10 nor 11.
I put a line in /etc/modprobe.conf - 'alias wlan0 b43' but I still don't get my wireless card until I type modprobe b43.
url
View 8 Replies
View Related
Mar 28, 2011
i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port
View 10 Replies
View Related
Aug 6, 2011
I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
View 5 Replies
View Related
May 31, 2011
i have newly bought Desktop system with the following configuration:
1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb
i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.
View 4 Replies
View Related
Feb 10, 2010
I just installed fedora12 on my machine,But it didn't recognize to my graphic card! my ATI card type is radeon 9550.
View 6 Replies
View Related
Sep 11, 2009
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
View 12 Replies
View Related
Jan 16, 2010
i bought a new laptopt Gateway, core i3, intel video card. I've tested ubuntu and mandriva without good video results. I have installed Fedora 12, i'm using an external lcd samsung screen on the vga port, it works fine. My display properties shows two screen as well as the correct resolutions...the problem it that i can't use my latopt screen, i have tried different resolutions..but nothing. I can't use mi laptopt without an external screen.Even if i boot without my external screen, my laptopt screen goes black.
View 14 Replies
View Related
Jun 8, 2010
my cisco wireless card model # wmp600n. Fedora doesn't even recognize that its there and i haven't been able to find any linux drivers for it, tried installing the driver using wine but still isnt working for me...
View 2 Replies
View Related
Mar 6, 2011
OS: Linux Mint 10 | Windows 7 Install Type: WUBI inside windows 7 Computer: HP Compaq Presario CQ56' Network: Realtek PCIe FE Family controller w/ Realtek 8102E chipset Problem in: Network Connection Issue: After I woke up my computer from Sleep, I lost ethernet. No connection. It told me that I had lost my connection. Why? Now, after several restarts, nothing.
View 14 Replies
View Related
