Is there a command to turn off my Broadcom wireless card to save power. In Apple, the have an Airport off listing under the airport menu, Is there something for Fedora?
View 3 RepliesI have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
dell laptop and went out on thenet looking for a solution for my failed wireless interface. i downloaded the firmware but then my interface still fails to come on after a reboot.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
[code]...
I have installed SATA driver recently...Even if i can use wifi but i could'nt find any ath0 interface in ifconfig or iwconfig commands....My wifi is taking place through eth1 interface why it happens.....The reason for asking this in order to use aircrack for wep key it says that the injection process only applicable for Athelon interfaces but mine is eth1...I was just trying aircrack-ng...
View 2 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
I'm thinking of installing Fedora 14 on my hp laptop, and need to know if this will support the Broadcom 4322AG wireless card it came with, will only probably use Fedora if the card is already recognized, or an easy gui install. This is the game changer between using fedora or linux mint for me
View 1 Replies View RelatedHow to use the BRCM driver for this following wireless cards?
BCM4313
BCM43224
BCM43225
Seems the since the 2.6.37 kernels it would be included. And wouldn't be necessary to use Broadcom STA linux driver anymore.
I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
View 5 Replies View RelatedSo I just loaded ubuntu 10.10....and it works great...except for my wirelessi've got a broadcom b43 ...i went into system, administration, download additional drivers and downloaded/authenticated a b43 driver, but my machine (hp dv4405) does not recognize any wireless signals. The wireless light on my computer doesnt turn on (there's a button to turn it on and off) anyways...it's annoying. I guess broadcom recently released some open source drivers, but I'm having trouble sorting through all the info
View 3 Replies View Relatedwhen it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies View Relatedturn wireless card on for the Dell Studio 16 (1645) for SUSE 11.2 64-bit.
View 3 Replies View RelatedFirst of all, trying to install it was a disaster as it tried to format my DVD drive and I was forced to delete my Windows partitions too. That's not why I'm writing, just thought I'd mention that I was already frustrated to begin with
Anyway, I have an HP G62-340US laptop. Everything seems to be running great except that I cannot turn on my wireless. The laptop has a key on the keyboard to power up the wifi and it's permanently off. Not sure if this is an issue with the keyboard driver, but pressing the wifi key does nothing.
I've tried scanning the hardware to determine what wifi device I have, but since it's not powered up, Linux doesn't even see it.
Any ideas which direction I should look?
As a side note, I have used Linux fairly regularly for several years. Mostly Ubuntu, LinuxMint and PinguyOS (all debian-based). So I'm not a complete newbie and am perfectly comfortable with the command line and configuration files.
similar to this problem http://www.linuxquestions.org/questi...nstall-673571/ i cannot seem to get the wireless card to turn on. ive tried NTDISGTK and Ntdiswrapper to no avail. it recognizes that the hardware is there, but will not turn it on. in terminal i have tried to force start it, but from what i remember, it gives me an error about authentication (might be access not authentication) ill get back here when i boot ubuntu and take some screenshots, at the moment i's running XP and hating it.
View 4 Replies View RelatedI decided to start of with Debian. I'm having trouble getting my wireless connection to work. I think i need drivers or something, i can't make a wireless connection. And it is a bit difficult for me, as i am new to Linux, and I'm not sure what I'm doing when i am writing these commands.
My wireless card is a Broadcom Corporation BCM43142 802.11b/g/n
I have been using Raspberry PI a little, so i am familiar with the terminal.
I am having issues trying to turn on my wireless card. I have tried to use the ifconfig command to do so, but it gave me an error.
Code:
@ubuntu-laptop:~$ sudo ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
This is what I get when I type iwconfig
[Code].....
I have installed Ubuntu via USB on a Dell Inspiron E1505 and I am unable to turn on the wireless card. I have a dual boot with Windows XP and I am able to turn on the card with keystroke Function/F2 and it works while in Windows. When I reboot in Ubuntu I am not able to use these keystrokes to turn on the card.
View 4 Replies View RelatedI have an HP Compaq 6735s with a Broadcom 802.11 a/b/g draft-n wireless card that I've been running 9.10 (the karmic koala one I think it was called) on for the past 7 or 8 months (been running Ubuntu in general for the last couple years). The card won't turn on--the indicator light is always orange, not blue as it should be. I thought it might be a hardware problem so I took it to a shop, but they tested it several times and said the card was fine and that upgrading my software should solve the problem.
I just upgraded it to the 10.10 distro (usually a friend did my upgrades for me but alas that's no longer an option) but that has not fixed it. I thought to try and re-download the Broadcom drivers on a different computer, then transfer them to my laptop, but when I did that and tried to open the .exe file, a message popped up saying the file was no good. (Can you tell I'm not a computer pro yet? Haha) Any idea how I could fix this or what the problem might be? I'm really frustrated as it's been an issue for the last six months, plus this is my only computer and I need it to function fully for purposes of finding a job, etc. If I could I'd just buy a different computer at this point (really disappointed with HP laptops in general) but sadly that's not an option. I'm to the point where I'd consider running Windows again just to make the damn thing work.
I just installed fresh Squeeze to my new hpmini 210-1100 netbook. No wireless. I have checked and I have Network Manager installed already.
I also compiled and installed Broadcom driver from here[url]
I followed their instructions and compiled the driver. I did get a wl.ko driver and installed it insmod wl.ko after modprobe lib80211
I noticed after rebooting neither wl.ko nor lib80211 showed when i did lsmod. So I did modprobe and insmod again. Still no wireless. Here are output of some commands that I thought would be relevant.
lspci:
I see only 2 computer icon in the system tray but not the parallel bars. When I went to System>Administration>Network, I was not able to add my wireless network name. The Add button was grayed out.
Aluminum Unibody macbook, the only aluminum macbook to date. It has a Broadcom chip in it and I installed the STA drivers. The first day it seemed to work fine. Then I noticed pages stopped loading. The max throughput I get is like 30KiB/s once in a while. Sometimes I see consistent speeds of 600B/S...this really sucks. Is there a fix or anything?
I was going to make the switch slowly to 10.10 full-time, but the wireless issue is bothering me. The keyboard brightness keys don't work natively, but there's a fix I saw but didn't have time to implement earlier. I like ubuntu but I don't like my wireless not working!
I have a Broadcom BCM4311 wireless card on my Dell D620 laptop.
Code:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
Code:
sudo apt-get update
sudo apt-get --reinstall install bcmwl-kernel-source
I'm new to Ubuntu. Today, I took my old Compaq Presario V3010US and gave it life with Ubuntu 10.04. The hard drive was erased and replaced with the Linux OS stuff. Ubuntu recognizes most of the hardware except my Broadcom wireless card. I find this to be a pain because i'm a newbie to linux stuff. Anyway, can anyone help me fix this? I thank you for your time reading this.
View 1 Replies View RelatedI finally gave up trying to configue the Broadcom 4311 card. I went and bought a Netgear WPN111 USB wireless adapter. I've looke for the drivers but I can't seem to find them.
View 3 Replies View RelatedEver since I upgraded to the new Ubuntu, I have been having problem with wireless. In the "Hardware Drivers" I come up with 2 drivers:
1) Boadcom B43 wireless driver
2) Broadcon STA wireless driver
I activated the first one, but latter noticed that the wireless was not working, so I tried installing the second and it returned this message:
Quote:
So I unactivated the first and then it disappeared leaving me with the second, and its error message.
Quote:
What should I do now?
The output for "lshw -C network":
Code:
The last few pages of /var/log/jockey.log.
Code:
I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.
An example of /var/log/syslog:
Code:
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long.
Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0)
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets .....
Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0).
Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: WPA: No SSID info found (msg 1 of 4).
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: No network configuration found for the current AP
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
I'm about to install OpenSuse 11.3 gnome on my laptop with ubuntu & vista in a dualboot, and wanted to make sure that the Broadcom 4322AG wireless card would be compatible with my laptop.
View 2 Replies View RelatedI am running openSuse 11.1 64 bit on my hp pavilion dv6458se; and am unable to get my Broadcom wireless card to work.
i tried reading a few forums, but they all start when 'lspci' recognizes the card.
My problem is that 'lspci' does not show any 'Broadcom' card.
I have given below the output of 'lspci' for your reference.
Alright so i have two drivers installed for my network wireless card and the damn thing still dont work. What do i do ? does anyone have any suggestions.is there a special way to turn my network wireless card on? i mean i see it but its just not turning on and scanning
View 5 Replies View RelatedI just upgraded from FC10 to FC11 (32-bit) on an old Dell laptop. I set my power management settings (in Gnome) to turn the monitor off after some idle period but always leave the computer running and the hard drives powered. I also set my screen saver to a blank screen. I noticed that the screen saver does come on (turning the screen black), but the monitor back lighting never goes off. I tried different idle times for the power management settings (I usually set it to 1 min, but some other posts implied that 11 mins might work). I should also mention that this is after I've logged into a user account, not sitting at the login screen.
I didn't have this problem in FC10 (the monitor would actually turn off) so I figured it was a bug in FC11, but I can't seem to find a thread addressing this issue. I've found some what similar threads, but none mentioning this particular problem.
I have a computer(Fedora 12 Kde4) playing flash,but the screen will get into sleep mode after a few minutes.But it will not sleep when it plays movies.So I want to know: is there any way to active the screen every few minutes so that the screen will not get into sleep ? It is a remote computer ,all I can do is to send cron job to it ,no SSH. So commands is the best way,but please do not interrupt the flash ? I run this command "xrefresh" to refresh the screen ,but the screen still sleeps.
View 1 Replies View Related