Red Hat / Fedora :: Broadcom 4322AG Wireless Card Support?
Dec 25, 2010
I'm thinking of installing Fedora 14 on my hp laptop, and need to know if this will support the Broadcom 4322AG wireless card it came with, will only probably use Fedora if the card is already recognized, or an easy gui install. This is the game changer between using fedora or linux mint for me
I have an HP Pavilion Dv6-1230US laptop that I bought from staples when it was on sale for 800 dollars with a 4 year accidental damage warranty. It came with Vista Home Premium 64Bit installed. It had Windows 7 Business 64Bit on it at one point, And the latest windows installation was Windows Vista Business 32Bit. My trial period ran out on vista and I switched to Ubuntu 10.04 32Bit, and, as always, I have a problem with the wireless card. I have looked it up and everything, i do have the drivers installed, and it looks functional, but its not. It will act like its going to connect to my AP (Netgear WNR3500L that is like 2 days old), but it eventually askes me for my WPA2-Personal AES key, which I have supplied, and is correct before hand, i type the exact same thing in and it still doesn't work.
I've tried sudo apt-get update, and sudo apt-get upgrade, but it doesn't work. nothing has to update. This installation was installed today, and updated about 6 hours ago to the fullest extent.The wired works absolutely perfect (that's how i updated it). Hardware:Laptop has a Broadcom 4322AG b/g/draft-n wireless card from HP integrated into the laptop. The router is a Netgear WNR3500L which i bought because we are switching ISP's soon and our old router is a modem, that will only work on a DSL connection.
I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.
After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.
My OS is Fedora 11.
The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.
My Network controller is : Broadcom Corporation BCM4312 802.11b/g
I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
I was running 9.10 in LiveCD mode and was unable to get online. Went to System>Administration>Hardware Drives and found "Broadcom STA wireless driver". Cool. So I went ahead and installed 9.10 (dual boot with Vista), repeated above steps but found no "Broadcom STA wireless driver" option, in fact no proprietary drivers. So I still cannot connect to the Internet, and I don't know where to go from here. (Note: I installed 9.10 side by side with Vista: good? bad?)
I decided to start of with Debian. I'm having trouble getting my wireless connection to work. I think i need drivers or something, i can't make a wireless connection. And it is a bit difficult for me, as i am new to Linux, and I'm not sure what I'm doing when i am writing these commands.
My wireless card is a Broadcom Corporation BCM43142 802.11b/g/n
I have been using Raspberry PI a little, so i am familiar with the terminal.
Aluminum Unibody macbook, the only aluminum macbook to date. It has a Broadcom chip in it and I installed the STA drivers. The first day it seemed to work fine. Then I noticed pages stopped loading. The max throughput I get is like 30KiB/s once in a while. Sometimes I see consistent speeds of 600B/S...this really sucks. Is there a fix or anything?
I was going to make the switch slowly to 10.10 full-time, but the wireless issue is bothering me. The keyboard brightness keys don't work natively, but there's a fix I saw but didn't have time to implement earlier. I like ubuntu but I don't like my wireless not working!
My wireless works perfectly with my university networks. But I have problem connecting to my house router. The first time I installed Ubuntu 10.10, it connected to internet and worked well. After a restart needed by nVidia driver, my house wireless stopped working while my university wireless still works. I have tried reinstalling the driver using System/Administration/Additional Drivers and manually
I'm new to Ubuntu. Today, I took my old Compaq Presario V3010US and gave it life with Ubuntu 10.04. The hard drive was erased and replaced with the Linux OS stuff. Ubuntu recognizes most of the hardware except my Broadcom wireless card. I find this to be a pain because i'm a newbie to linux stuff. Anyway, can anyone help me fix this? I thank you for your time reading this.
I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.
An example of /var/log/syslog: Code: Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long. Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0) Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets ..... Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0). Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS. Apr 15 17:58:29 macbookpro wpa_supplicant: WPA: No SSID info found (msg 1 of 4). Apr 15 17:58:29 macbookpro wpa_supplicant: No network configuration found for the current AP Apr 15 17:58:29 macbookpro wpa_supplicant: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
I just installed 10.04 Final Release as a dual boot on my HP Pavilion dv4 1123us laptop, and the "Hardware Drivers" option in System> Preferences does not detect that anything is in need of an install. It also gives me a message right before it checks to do something like connect to the internet to update the database. If I do this, will it detect the 4322AG card, or will I have to do something entierly different? I'm not afraid of the command line, but I also want to keep this as simple as possible. I'm sure this question has been asked before, but I did my best to try and find it earlier.
I recently installed Suse 11.4 on my Dell Latitude 2110 netbook using the KDE live distribution, and, after that, the Broadcom wireless ceased to work. To enable the wireless connection, I have to press Fn + F6. If I do it now, the wireless led indicator turns on for a couple of seconds, then turns off again. Moreover, the option to enable the wireless connection in the network manager is greyed out
Code: wlan0 IEEE 802.11abgn ESSID:off/any Mode: Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit: 7 RTS thr: off Fragment thr:off Encryption key: off Power Management: off dmesg output:
Code: [8.330963] brcm80211: module is from the staging directory, the quality is unknown, you have been warned. [8.362403] brcm80211 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [8.362422] brcm80211 0000:0c:00.0: setting latency timer to 64 output of rpm -qa | grep broadcom:
I have had trouble in nearly every linux distrobution cept for backtrack 3(heavily modified ubuntu which has a lot of wireless drivers on it. i know A LOT of people in the past have had trouble with these cards.
I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
I have installed SATA driver recently...Even if i can use wifi but i could'nt find any ath0 interface in ifconfig or iwconfig commands....My wifi is taking place through eth1 interface why it happens.....The reason for asking this in order to use aircrack for wep key it says that the injection process only applicable for Athelon interfaces but mine is eth1...I was just trying aircrack-ng...
Broadcom BCM4306KFB will not connect to internet.how do I download the firmware? I entered the following on the terminal:sudo/usr/sbin/install_bcm43xx_firmware...File does not exist....any ideas?I am running openSuSe 11.1
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...