The Network manager didn't recognize my eth0 device as a maned device.In shell I can use my eth0 but not by Gnome Network Manager.My device is nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2) and I'm running a Fedora 11. On previous version like, Fedora 10 an 9 this board was managed normally by network manager.Anyone already set up this board on Network Manager ?My Notebook is a HP dv2736us and I'm using a Fedora 11 64bits.
I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.
I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?
Network manager doesn't recognize nas0 interface and i have problems with using Gwibber, Evolution mail,Empathy, etc Is there any way to add nas0 in Network manager?? I know the solution to remove Network manager, but i need Network manager because i'm often using wireless (as second internet connection).
I had F14 up and running as a server working awesome. I shut it down and moved it. Now on start up, system doesn't seem to recognize my ethernet card...eth0. How to get my ethernet card back online?
I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
I've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code: eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75 inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
I'm using KDE 4.5 with Ubunthu 9.04 installed Laptop. The problem occurs when I'm going to connect internet with my Huawai E160 dongle. The network manager program didn't identify my dongle so I can't connect to the internet. I have create a broadband connection in network manager program.
I can connect to internet with GNOME desktop since dongle is detect and I can create a Broadband connection and connect to the internet.
I'm trying Fedora for the first time. I tried installing NVidia's driver with their shellscript but it didn't work for lots of reasons. Has anyone done this before?:[URL].. Does it work? I never used a distro with a package manager before. Aren't there several different drivers for different NVidia cards? How do the instructions in that link make you get the correct driver? And then does it create an /etc/X11/xorg.conf file?
EDIT: or is the Neaveau driver good enough already? I can't figure out if it's basically a finished product or not.
I've just installed F13 on Acer Aspire 5551G with has Broadcom BCM57780 ethernet card. And F13 does not recognize this card: in System > Administration > Network Devices tab is empty (but in Hardware tab the card is listed). So, I can't connect to the Internet
So far I've found: 1) Related bug for F11. 2) Related thread for F12.
I've tried all possible solutions mentioned in both the bug and the thread, but nothing could convince my F13 to like the ethernet card.
I did a fresh install of OpenSuSE 11.3 KDE 64-bit on my new laptop. Worked like a charm. But I brought it with me to work without connecting it to a wi-fi and now the network manager doesn't want to start when I'm back in range of my home connection. Also, whenever I try to launch KNetworkManager, it won't load up a window and I still can't connect. This is even disabling the Ethernet port also.
Writing this from a 9.10 LiveCD, so I know that my hardware is working fine.My system is running 10.10 normally. Last night, the update manager popped up, as it frequently does, and said I had some packages that could be updated. So I let it update after which it said I needed to reboot. So I did, and now it doesn't recognize my network connection, and even the blinky lights on the port itself stay dark. don't know a lot about networking or stuff under the hood, but I can work a console and/or text editor if someone can tell me where to look and what to type.My hardware is (from "lspci | grep -i eth"):02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)The packages that have a modified date of last night are:
boots fine if an external monitor is plugged in, otherwise the laptop screen just flashes white till it dies and reboots. lsmod says nouveau is loaded, however it lets me rmmod it as though its not in use. rmmod on the nvidia mod says it is in use. nvidia settings can change the resolution of the external monitor
used yum to install and built from scratch, both have the same result. reason i want to get rid of nouveau is because it detects my laptop resolution as larger than it is and even if i lower the resolution it still stretches it further than the boundries of the screen. without the nvidia driver my laptop display is recognised correctly aside from size issues.
Enabling the nvidia driver / etc / rc.d / init.d / functions line 526 1484 Segmentation fault "$@" [FAILED]
I updated my FC10 just a day back. The problem is that Netwrok Manager has disappeared. And in spite of re-installing it, it doesn't appear on the panel when i enter 'NetworkManager' as root in the terminal.I have a USB modem right now. Update was made through a broadband connection. Ethernet works perfectly well but this USB modem of mine doesn't work at all. And I have to use USB not Ethernet.
I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.
I installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code: nm-applet ** Message: applet now removed from the notification area ** Message: applet now embedded in the notification area ** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme ** ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
I have a system running a very basic LTS install (10.04). Ubuntu has been setup with very little additional packages. No GUI. Once it's booted to a prompt for the first time I add the following packages,
cups cupsys ssh pi memtester nfs-common aptitude safe-upgrade
At this time I don't have additional information on exactly what packages are installed. I did not perform the installs myself. I will update this thread when I get more details from my IT counterpart on how the system was setup.
This is used for a headless(no monitor, no keyboard) system running some custom applications.
Here are two problems.
1. If I plug into an ethernet network after I boot, the network never connects. I need to reboot with the network connected in order to get an IP. What is the service to "auto connect" to a network?
2. I have a network printer configured on lpd called myprinter. If I am connected to the network when I boot, I can print to this printer just fine using:
Code:
However, If I boot disconnected from the network and print to myprinter, the jobs obviously cannot print. They get spooled. Using 'lpstat -t' I can see that the spooled print jobs are assigned a job number and that myprinter is trying to connect. I shutdown, reconnect my ethernet network and boot up. All my printer configuration is blown away.
/etc/cups/printers.conf has been wiped out to look like this:
Code:
My 'good' printer configuration is copied to printers.conf.O
To recover from this, I need to stop cups, copy printers.conf.O to printers.conf, restart cups, and re-setup my network printer.
So, What causes my printers to get wiped out? I've repeated this on 4 systems with the same setup.
I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.
I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.
I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.
I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.
Is there a way to enable these, so that they can be edited?
Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections
The Network Manager window appears correctly.
I see all automatically generated settings that were created for my various devices:
In particular, I want to be able to edit "Auto vmnet8", for VMware usage.
I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.
However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).
I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.
Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.
I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.
I lost my network manager applet after removing kde-desktop. restore it, as I dont find it in add to panel applications I dont have any clue, also how could I add bluetooth applet in notification area.
I currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:
Code: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?
After an update in mid-February I can no longer get Network Managero run anyinterface. I tried downgrading ppp, but that did not help. I have tried to delete all devices, but there is no user interface from which I can do that. Network Manager does not appear in any system tray. I even did a complete remove and reinstall, to no avail.This is true on both 32 and 64 bit Fedora 12, and on laptops, desktops and VBox VMs.Here is what I see in messages.log:
Code: Mar 27 12:09:46 vmf11x64 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...
I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?
I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.
Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.
What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.
does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.
I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail
