Fedora Hardware :: Broadcom 57780 Gigabit Network Card

Mar 16, 2011

I have been trawling the web looking to see how to get my broadcom nic working on my Dell optiplex 380 with fedora 12. Basically it shows up when I run lspci but no where else, unfortunately I have no linux experience. Other things that I have tried were to check the blacklist driver file, which had no reference to the nic.

View 3 Replies


ADVERTISEMENT

Ubuntu :: Broadcom 57780 Supported In Kernel 2.6.35

Aug 15, 2010

Just upgraded my kernel to 2.6.35 and now my broadcom 57780 WLAN card is not recognized. Trying to reload the proprietary driver fails. Anybody else with this specific card got it working on 2.6.35?

View 1 Replies View Related

Networking :: Gigabit Network Card For CentOS 5.4 Server

Feb 11, 2010

I am looking for a gigabit network card for my centos 5.4 server. I am looking for something known to work well with linux. I have been on the bestbuy site and I found a DLink (DGE-530T) card with support for linux from the vendor but after reading feedback from users with that card I am not so sure it is linux friendly. I am now thinking of buying online.

View 2 Replies View Related

Fedora Hardware :: Broadcom Corporation BCM4318 / No 'b43' Network Card Was Recognized?

Nov 25, 2009

I have had a Broadcom Corporation BCM4318 since Fedora 10. In addition, both Fedora 10 and 11 wouldn't recognize the card with out third-party drivers. I was pretty excited when I booted the 12 Live CD and it recognized it at boot.

Since this is my lab box I thought its time to give Fedora 12 a try.

I did an DVD upgrade from 11 to 12 and rebooted. The Broadcom came up fine this time. I did a yum upgrade to finish from whatever was not on the DVD and rebooted. This time no 'b43' network card was recognized. I still had my third part driver files so I:

b43-fwcutter -w /lib/firmware/ ./broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o

and a 'modprobe b43' and I had my card back.

I am sorry for dragging this out this far, but now every time the Fedora 12 box reboots I have to type in modprobe b43 to get my card to work. I did not have to do this for neither Fedora 10 nor 11.

I put a line in /etc/modprobe.conf - 'alias wlan0 b43' but I still don't get my wireless card until I type modprobe b43.

url

View 8 Replies View Related

Hardware :: Intel 82574L Mobo Gigabit Network Card

Sep 10, 2010

NIC: Intel 82574L Gigabit mobo network card
Issue: After the server has been up for a random amount of time, the network connection is lost. Attaching a console and looking at ifconfig I see a large number of dropped packets and collisions.

use;
Code:
lspci -vxx
to list the make manufacture of NIC and the device driver it is using.

In this case: Intel 82574L, e1000e
Look in var/log/messages to get the version of the driver, in this case 1.0.2
Download .gz file with source code, follow instructions to install newest driver (e1000e.ko), in my case version 1.2.10. [URL]

View 2 Replies View Related

CentOS 5 Networking :: On Board Network Card Refuses To Run Gigabit?

Jun 30, 2009

I've just set up a PC with CentOS 5.3 runing on near identical hardware to an existing 5.2 machine. Motherboard is Asus M2A-VM which I discover by chance generally works very well with CentOS. Ethernet is on board Nvidia.The older machine just did run gigabit speed without any intervention at all, rather to my surprise. The newer machine insists on running at 100 Mbit which is annoying as it is connected to a NAS through a gigabit dumb switch.

The obvious difference between the two is that ethtool on the older machine says that supported ports are TP, and so the port is TP. Whereas the newer machine says that supported ports are TP or MII and insists on running MII. I cannot change this with ethtool -s eth0 port tp. Perhaps not too surprisingly, mii-tool says that the supported speeds range up to 100 Mbit.

View 13 Replies View Related

OpenSUSE Hardware :: 11.2 - Marvell Yukon Gigabit Ethernet Network Card 88E8072

May 12, 2010

I have a dual boot system (Suse 10.0 and Windows XP Pro) in my notebook. My notebook is toshiba m358, which has a Marvell Yukon Gigabit Ethernet Network Card (Marvell 88E8072) on it. My problem is this: in Windows XP Pro, the network card works well, but in openSUSE, the light on the network card does not turn on. I believe that there is no driver for the network card. I have tried several ways to solve this problem:

1. Download Marvell 88E8072's driver from "[URL]", whose name is "install_v10.85.3.3.tar.bz2", and then install it with following commands:

Code:
# tar xfvj install_v10.85.3.3.tar.bz2
# cd DriverInstall
# ./install.sh .....

Code:
# modprobe sk98lin
# WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
After I reboot the openSUSE, the light of network card is still off.

2. Follow "[URL]" to configure the Marvell 88E8072. It also does not work.

View 4 Replies View Related

Ubuntu Networking :: Broadcom Corporation NetXtreme BCM5721 Network Card Randomly The Network Connection On The Server Will Stop Working?

Jan 29, 2011

I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.

I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?

View 4 Replies View Related

Fedora Networking :: Intel Gigabit Card Only Connects At 100Mbps

Jan 24, 2009

I recently swapped out my old network switch (10/100) for a Netgear GS105 gigabit switch. With the exception of my Fedora 10 laptop all the rest successfully connect at gigabit speeds. But my laptop (with an Intel Corporation 82566MM Gigabit Network Connection (rev 03)) will only connect at 100Mbps. If I look in the logs for my network card here is what I get:

e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64

0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:7e:46:e6:a3
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff

0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

What I can try to bring it up to gigabit speeds?

View 8 Replies View Related

Networking :: Cannot Detect Broadcom Nextreme Gigabit Ethernet On F2

Apr 20, 2010

I am using fedora core 2. I used the oldest version of fedora just because im running only 1 system, my specification is: HP compaq PC,pentuim4, 512mb memory, 40gig hdd, Intel board. I have two units same spec..windows xp and the other one is fedora 2. The windows xp normally detect the lan card, but when I try to fedora2, I try to active it and seems no lan card detecting,. How to detect broadcom nextreme gigabit ethernet to my fedora 2 OS???

View 7 Replies View Related

CentOS 5 Networking :: Broadcom BCM5700 Gigabit Not Present In 5.3

Apr 22, 2009

I just kickstarted this box - I used eth0 and had no issues. After booting - eth0 is not available/present. This was not an issue in 5.2. This is a dell 4600 - both the 100mb intel and gig broadcom are onboard. I am about to try a different kernel. This is not a show stopper - it's plugged into 100m switch and I can just use eth1 - but I am curious as to what is different and why this no longer works.

[root@localhost ~]# ifup eth0
tg3 device eth0 does not seem to be present, delaying initialization.
[root@localhost ~]# lspci
00:00.0 Host bridge: Broadcom CMIC-HE (rev 22)
00:00.1 Host bridge: Broadcom CMIC-HE
00:00.2 Host bridge: Broadcom CMIC-HE
00:00.3 Host bridge: Broadcom CMIC-HE
00:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) .....

View 5 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Ubuntu :: Can't Detect Broadcom Netlink BCM57785 Gigabit Ethernet PCIe

Aug 5, 2011

I'just installed ubuntu 10.04 LTS on my new laptop(ACER aspire 5750). Ubuntu installed perfectly. Every things working ok but, it can't able to detect my CABLE MODEM.

View 1 Replies View Related

Ubuntu / Apple :: Broadcom Wireless Card - Connecting To WPA Network

Apr 15, 2010

I seem to be have issues periodically connecting to wireless networks with WPA. It'll work one minute, and then I switch my macbook back on after a period and it refuses to connect again. It's happened on and off on three different networks now.

An example of /var/log/syslog:
Code:
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): association took too long.
Apr 15 17:57:27 macbookpro NetworkManager: <info> (eth1): device state change: 5 -> 6 (reason 0)
Apr 15 17:57:27 macbookpro NetworkManager: <info> Activation (eth1/wireless): asking for new secrets .....
Apr 15 17:58:27 macbookpro NetworkManager: <info> (eth1): deactivating device (reason: 0).
Apr 15 17:58:27 macbookpro NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: WPA: No SSID info found (msg 1 of 4).
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: No network configuration found for the current AP
Apr 15 17:58:29 macbookpro wpa_supplicant[949]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys

View 3 Replies View Related

CentOS 5 Networking :: Can't Get Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe Working

Sep 20, 2010

from [URL]

i did the following

[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100

View 5 Replies View Related

Ubuntu Networking :: Broadcom Network Card - WiFi Light Stays On All The Time ?

Dec 13, 2010

I installed Ubuntu 10.10 amd64 online today. I was using 10.04 32-bit before, and the network drivers were easy to find and install. Ubuntu did the job for me and they worked flawlessly. It was a relief I didn't need to search around.

Even though 10.10 (64bit) found the drivers for me, both ethernet and wireless, they do not seem to be working alright. I installed both, made a restart. I found that the WiFi light on my laptop stays on, even if the wireless network is turned off using either the key combination (Fn+F2), or manually turning it off.

Issues with the ethernet? I am right now using ethernet but it does not care to detect the connection. Empathy won't connect automatically as a result- says no network connection. But here I am, posting this. Evidently, there is a connection, right?

Issues with the wireless? The WiFi light stays on all the time, and it isn't able to get hang of the connection I have at home. It just won't show any wireless connections available. When I tried to connect by giving it the SSID and the encryption type and password, it didn't work. Just kept asking for the password again and again (I have checked with the router- the password is correct).

View 2 Replies View Related

Ubuntu Networking :: Broadcom Wireless - Wired Network Card Has Died On Me Prior To Installation

Sep 12, 2010

I just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.

View 5 Replies View Related

Fedora Installation :: Intel Corporation 82579V Gigabit Network Connection?

Aug 29, 2011

I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :

Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :

Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes

Then, I restart network service, but eth0 is down, no device found for the connection eth0.

View 10 Replies View Related

Fedora Networking :: BCM4322 Broadcom Card Can't Use WEP

Jul 11, 2009

I have a Dell-made, Broadcom-based wireless card, BCM4322. I'm using Broadcom's proprietary drivers from RPM Fusion.

Code:
lspci | grep -i broadcom
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)

Since installing F11, I can no longer connect to WEP-secured wireless. When I use automatic IP settings, the connection simply times out. When I specify an IP, Netmask, Gateway, and DNS server, NetworkManager thinks the connection properly established, but any pings time out, even when I don't specify a hostname (just an IP address). I can connect to (and use) unencrypted wireless. I haven't tried other encryption schemes. The WEP index is 1 and it's non-authenticated (open). I've been playing with the settings for over a week now with no success.

View 6 Replies View Related

Fedora Networking :: Install Broadcom Wireless Card On 11?

Sep 1, 2009

I chose to change my operating system from Microsoft Xp to Linux and finally chose Fedora to be my new OS.

After Fedora installation I got a problem that I cannot connect to my wireless network I used to using Xp, I think that my wireless card is not installed on Fedora because when I checked in the network configuration I found that the only installed adapter is the Ethernet Realtek for the wired connection.

My OS is Fedora 11.

The CPU Model name is : Intel (R) Core (TM) 2 Duo CPU T8300 @2.40 GHz, so I think that my architecture is x86_64.

My Network controller is : Broadcom Corporation BCM4312 802.11b/g

View 14 Replies View Related

Red Hat / Fedora :: Broadcom 4322AG Wireless Card Support?

Dec 25, 2010

I'm thinking of installing Fedora 14 on my hp laptop, and need to know if this will support the Broadcom 4322AG wireless card it came with, will only probably use Fedora if the card is already recognized, or an easy gui install. This is the game changer between using fedora or linux mint for me

View 1 Replies View Related

Networking :: Gigabit Card With 100Mbits Speeds?

Mar 3, 2011

From what I can see in mii-tool I should be getting 1000Mbit link but when I transfer files I only get 100mpbs?

Code:
morrow:~# mii-tool
eth0: no link
eth1: no link
eth2: negotiated 1000baseT-HD flow-control, link ok
eth3: negotiated 1000baseT-HD flow-control, link ok
morrow:~# lshw -C Network
*-network:0 .....

View 7 Replies View Related

Fedora Hardware :: F13 Does Not Recognize Broadcom BCM57780 Ethernet Card

Sep 18, 2010

I've just installed F13 on Acer Aspire 5551G with has Broadcom BCM57780 ethernet card. And F13 does not recognize this card: in System > Administration > Network Devices tab is empty (but in Hardware tab the card is listed). So, I can't connect to the Internet

So far I've found:
1) Related bug for F11.
2) Related thread for F12.

I've tried all possible solutions mentioned in both the bug and the thread, but nothing could convince my F13 to like the ethernet card.

View 1 Replies View Related

Fedora Hardware :: Use BRCM Driver For Broadcom Wireless Card ?

May 27, 2011

How to use the BRCM driver for this following wireless cards?

BCM4313
BCM43224
BCM43225

Seems the since the 2.6.37 kernels it would be included. And wouldn't be necessary to use Broadcom STA linux driver anymore.

View 2 Replies View Related

Debian Installation :: Which PCI Gigabit LAN Card Is Lenny Proof

Feb 1, 2010

I'm giving up trying to install Lenny as a server. The netinstall won't recognise my realtek 8139 chipset on the PCI ethernet NIC. I've googled so much i'm freakin loosing it. The install fails while getting an IP adress via DHCP. So a new networkcard is in order. Why not go for gigabit lan then. Which PCI gigabit LAN card is 100% guaranteed to work with Lenny net install cd?

View 3 Replies View Related

Ubuntu Servers :: Inserted Gigabit Ethernet Card - Now What To Do

Mar 3, 2010

I installed ubuntu server 9.10. During the install the onboard 10/100 land card was automatically installed and was used for updating packages. I just put in a DGE-530T gigabit ethernet card. I can see it recognized under lspci.01:07.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11). It does not show up under ifconfig. The CD came with linux drivers. The readme talked about recompiling the kernel and a whole bunch of other stuff. Google was equally confusing. What do I do?

View 7 Replies View Related

Ubuntu Networking :: Gigabit Card Only Works On 100 MBit

Apr 14, 2010

I have bought two Asus NX1101 gigabit cards for my kubuntu box and ubuntu server box. The cards are automatically detected as eth1. However the speed is set to 100mbit instead of 1gbit.

ifconfig eth1 .....
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=Sundance Technology IPG Triple-Speed Ethernet duplex=full ip=130.89.169.33 latency=64 maxlatency=10 mingnt=80 multicast=yes port=MII speed=100MB/s
resources: irq:17 ioport:ec00(size=256) memory:f7d00000-f7d000ff memory:f7c00000-f7c0ffff(prefetchable)

I noticed that both lshw and ethtool claim that the card does not support 1000mbit. So changing the speed manually with ethtool doesn't work. In windows XP the card works as it should.

View 4 Replies View Related

Fedora :: Command To Turn Off Broadcom Wireless Card To Save Power?

Aug 13, 2009

Is there a command to turn off my Broadcom wireless card to save power. In Apple, the have an Airport off listing under the airport menu, Is there something for Fedora?

View 3 Replies View Related

Fedora :: Inject Monitor Mode In Broadcom 4313 Wifi Card?

Mar 28, 2011

i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port

View 10 Replies View Related

Fedora X86/64bit :: 15 Dont Recongnize Broadcom BCM 4322 Wireless Card?

Aug 6, 2011

I am a newbie in rpm files, I am testing Fedora 15 (gnome3),nd I liked it, congratulations to Fedora Team, I was using Linux mint9, and I have a certainly experience with .deb files and APT, but .rpm and YUM, I am a little lost...I have a HP Pavilion dv2-1110us laptop with a Broadcom BCM 4322 wireless card; the netwokmannager said "wireless firmware missing"How can I install it?There is in the Fedora repositories?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved