Fedora :: Getting Error On Running Any Video File?
Nov 5, 2010I get this error if I try run any video file [URL].
View 4 RepliesI get this error if I try run any video file [URL].
View 4 RepliesWhile trying to run avi file using totem, I get error. As I tried to "search" as used by totem, I get:
$ totem A Walk To Remember.avi
** Message: don't know how to handle video/x-divx, divxversion=(int)3, framerate=(fraction)2997/125, width=(int)640, height=(int)272
** Message: don't know how to handle audio/mpeg, mpegversion=(int)1, layer=(int)3, rate=(int)48000, channels=(int)2, codec_data=(buffer)010002000000880101000000
** Message: Error: You do not have a decoder installed to handle this file. You might need to install the necessary plugins .....
How can I get the codecs?
I m running Fedora 15 i386 release and just performed an update for packages.
Code:
yum update
The PAE kernel and Nvidia driver got updated as well as a few other packages.
When I come to playing a video with Xine I get this error code...
I am trying to run my code which calls opencv internally. I get this error:
swscaler at 0x86cebd0]No accelerated colorspace conversion found.
[swscaler at 0x86d51c0]No accelerated colorspace conversion found.
[swscaler at 0x86db7b0]No accelerated colorspace conversion found.
[code]...
I created a USB Live disk and installed Fedora 12 to my Asus EEE 1005HA (12 inch screen). The machine boots fine, but Hardware Graphics acceleration is not working correctly. If I stop X11, and type "Xorg -configure", the Xorg utility recieves a segmentation fault and exits, and the resulting xorg.conf file does not work correctly. The error is "(EE) open /dev/fb0: No such file or directory". All the correct packages are installed, and there is no logical reason why it is failing. The rest of the hardware on the EEE works fine.
View 2 Replies View Relatedhow to install all plug ins for playing dvd or video files in fedora in a non internet connected system. i had tried to install vlc media player but no luck. so please tell how to find this required plug ins and some security upgrades for fedora 12 . i want to write them all into a disk . and want install them to my fedora desktop whenever i need them! or tell me how to install these plugins without connecting to internet
View 2 Replies View RelatedI am trying to run a script called install.sh as follows: I get a jar file, and extract it using the command: unzip filename.jar -D path/to/files then I navigate to that directory where I extracted the files, and run the command: sh install.sh (where install.sh is one of the files that has been extracted in that directory using the above unzip command.) running this command gives me an error:'nstall.sh: command not found.' among other errors in the script ( from that portion of the script that should not even be executed, which is really weird). However, instead of unzipping the jar file, if I just copied the same install.sh file to that folder, and ran the 'sh install.sh' command, the script runs fine.
View 6 Replies View RelatedIt started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
how could i convert SWF video file to AVI video file on linux? is there any tools ?
View 1 Replies View Related[code]...
how to fix the problem?
I have configured g2ipmsg-0.9.6.But when i am trying to run "g2ipmsg" executable from command line,i am getting following error:
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
[code]....
I'm having trouble using ninjavideo.net with fedora firefox. I installed JAVA and Flash, but everytime i try to load a video it says "There was an error getting the video information." Does anyone have any idea what's causing this, and more importantly how to fix it?
View 1 Replies View RelatedI use record mydesktop to record what i do in mydesktop. But when i stop record. This box appear. I wait... wait... and wait. But the process encode never complete .
View 5 Replies View RelatedI keep getting this error when I try to run the auto update. b43 conflicts with broadcom-wl
View 2 Replies View RelatedWhen upgrading from fedora 10 to fedora 12 (after reboot and during installation) I get the error message as - Error running transaction - you need more space on the following file systems : 23 M on /mnt/sysimage/boot
After this installation stops.
I checked /mnt , there is no folder as sysimage . Please suggest how to proceed further ?
I get this : Code: [root@Fedora philip]# gedit (gedit:3132): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I now tested it being not root and it's ok:
Code:
[philip@Fedora ~]$ gedit
[philip@Fedora ~]$
No error when I'm not root. So it's only when I become root and run gedit in terminal I get errors, why?
I am a final year BE student. I am working on the ehci-0.6 library for tracking the the face in fedora 13 in vmware. I am able to compile the code but could not run the sample programs. The error is as follows. After I compile the program:
cd ehci-0.6
./configure
make
I am able to do the above with out any errors. Later when try running samples. I am getting the below errors:
cd samples
make
./simple2d
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element appsink1, but it is in ready instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element ffmpegcsp1, but it is in READY instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
OpenCV Error: Unspecified error (unicap: failed to get info for device
) in CvCapture_Unicap::initDevice, file /builddir/build/BUILD/OpenCV-2.0.0/src/highgui/cvcap_unicap.cpp, line 139
terminate called after throwing an instance of 'cv::Exception'
Aborted (core dumped)
and but ven tried using
./samples/simple2d
the error I am facing is "could not initialize the capturing"
How to overcome this kind of error. Blank window opens and goes on showing the error mentioned above and ends ven given ctrl + c. The expected output to open a window and display the capture the person present in front of the webcam and print d coordinates of the face captured.
I have been a regular user of Linux and have never faced a problem like this one, after I installed Linux Fedora 14 on my laptop. After installation, almost all the softwares that I was earlier using with the earlier version of Fedora are stopping immediately on starting and exitting with a fatal error. eg. when I try to run paraview, it immediately closes after giving some fatal error. Similar is the case with gambit, tecplot and mayaVi softwares.With my earlier version of Fedora, I was not facing any problem. But since I installed Fedora 14, I am facing this problem. I even tried by downloading and installing latest version of paraview and mayaVi from the net, but the latest versions also on starting give the same error : fatal error, and exit the program.
The softwares I mentioned immediately close indicationg a fatal error. The following error messages appear in the console after abrupt shut down of softwares with fatal error :
Output of /var/log/message file:
I'm having trouble using ninjavideo.net with fedora firefox. I installed JAVA and Flash, but everytime i try to load a video it says "There was an error getting the video information."
View 1 Replies View RelatedI have a x86_64 i5 processor running Fedora 13.When I run the make file,I get the following error.Can someone help me out please?
# make
making all in ./lib...
make[1]: Entering directory `/home/Anil/Downloads/glut-3.7/lib'
[code]....
I just install mplayer-1.0-0.111.20091029svn.fc12.i686 and I can only hear the sound of the wmv file, but not the video [URL].
View 2 Replies View RelatedI open an ODS file and edit it and save, fine. But sometimes and for no readily apparent reason it refuses to save the document with the error message:"Error saving the document <filename>: Write error. The file could not be written". I have upgraded my version of OpenOffice but the issue remains. Once it starts with that error the only way to save the file is to actually abandon my change and restart OOffice. Today I lost an hours stuff as the auto save was also failing but not giving me any warning it was failing. I'm not sure if this is an OpenOffice, file system, Fedora or permissions issue though I've not noticed anything similar with other applications. Have set permissions to 777 but still get the error.
View 3 Replies View RelatedAfter starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedSometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View RelatedI was wondering how to create a GNOME screensaver from a video file? I don't really care what video format the screensaver creator supports because I can always transcode the video with ffmpeg or mencoder. I also, don't care if the creator uses proprietary formats such as mpeg, mpeg4, avi, etc. I do however want the program to create an installable screensaver.
View 2 Replies View RelatedDoes anybody know how to get attributes for a video file from the command line? For instance I'd like to get the video file running time. I've looked all over and I can't find out how to do this; the "file" command shows some data but not running time. I'm sure there has to be a way.
View 2 Replies View Relatedi have a problem with realplayer 11 i can't open it due to that error message
Code:
/opt/real/RealPlayer/realplay.bin: error while loading shared libraries: libgdk-x11-2.0.so.0: cannot open shared object file: No such file or directory so how can reveal this problem
I need to install VMWare Workstation on Fedora 13, but I keep running into the following error -
"C header files matching your running kernel were not found...."
It's looking for 2.6.33.3-85.fc13.i686 but when I did a - yum install kernel-devel I got 2.6.33.5-124.fc13.i686
when I do - yum install kernel-devel `uname -r`
I get the following -
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package kernel-devel-2.6.33.5-124.fc13.i686 already installed and latest version
[code]....
I am using Gstreamer for creating one of my video streaming application. My application creates multimedia session and then stream around 200 video sessions (a very processor intensive job).In doing so, the no. of threads created is around 1500 and I have given around 1536 KB as my stack size for each of these threads. I have one Quadcore(intel Xeon) system of around 8 GB of RAM(64 bit) with RHEL 5.5(kernel - 2.6.18-92.el5). After few hours of testing I see that my overall memory(RAM) is eating up. I did checked the memory and I saw that my cache size is growing. So far so good, as I can understand that system does cache instead of leaving some RAM free.
My problem comes, when I see that after almost 20-25 hours of testing, RAM is continuously being eaten up and maximum part of that is going into cache. If I leave the system for few more hours I see whole of my memory is consumed up and now my swap started getting used. If I check the cache now, I clearly see most of RAM is now in form of cache. I still didn�t stop my application and allowed it run for few more hours and after sometime I see that process give segmentation fault while creating the pthread (create_pthread::unknown error 513).I also tried to observe the �core� file of application created in this way , but it doesn�t� show anything.
One thing I must mention that, in �top� I see almost constant values of resident memory, virtual memory and shared memory. There is no increase of memory usage here. So here I can assume that my application is not leaking the memory. I also observed that if I kill my application any time during this, the memory doesn�t go into free pool. Anyone, here can give any pointer for this kind of behavior. Is it can be because of some kernel BUG which is not freeing the memory to application usage.