I want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies
To get multimedia working, or explain what I'm doing wrong.
The problem is that none of the video players doesn't play video, they show only black window and play audio.
I have Fedora 11 Leonidas, fully up-to-date.
I have installed rpmfusion and livna repository.
I have installed following packages:
When I try to play video with totem, it doesn't output any error, but just doesn't play video.
with mplayer:
xine and kaffeine just say:
vlc:
I tried several different files, which works perfectly in windows and ubuntu.
I installed windows binary codecs for mplayer to /usr/lib/codec/
Looking for efficient program for Ubuntu like DVD Flick for Windows to convert one or several mpeg videos to DVD without the necessity to make a menu screen with choice buttons. I want the videos to auto-load and run continuously. I have tried all the programs in the U. Software Center and none have this option. (Or I have not been able to discover it).
View 2 Replies View RelatedAfter a fresh custom install of Squeeze I could not play any video. debian-multimedia.org repository is in my sources.list. Trying to play an AVI video with totem I get the message
[code]...
i tried to play any kind of video, it doesn't matter what it is and when i double click it to play, the program acts like it's loading it and then disappears. it doesn't matter what program it is, it does the same thing. i'm using ubuntu 9.10. is their anything i can do about that?
View 4 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View Relatedthe movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI'm using 9.10 on acer aspire one (not the netbook remix).im using the default messanger client empathy.everything else works fine but when i try to video chat the video chat begins but if the other person even moves a litte or even nods his head then the video becomes so choppy that u cant see anything and then after 5 min comes back to normal for a second or two.i have all the latest updates and gstreamer0.10-ugly-multiverse which is required for video chat b/w empathy and gtalk.
View 1 Replies View RelatedMy system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
Phenom 9500+ quad core, 3GB RAM, Nvidia 8800GT: 260.19.36 driver.Installed the latest Boxee for Linux. Got my remote setup. Everything works except when I open a video it opens in a tiny box in the upper left hand corner of my monitor.Is there any way to get Boxee videos to play full-screen?
View 6 Replies View RelatedJust installed Ubuntu 10.10 on an old Dell Dimension 8400 with an ATI RV370 Radeon X300 video card and 512MB of Ram. The video seems to go very fast and skips. I followed the Comprehensive Multimedia & Video Howto but still have the same issue. I have also read many posts but I have trouble understanding some of the responses. Could it be the low amount of RAM?
View 1 Replies View RelatedI have an integrated intel video and latest xserver-xorg-video-intel driver(using only stable repo). Now I wanna watch high-res video. From the bits of info collected from all over internet I understood that I need to:
1.aptitude install libdrm libva.
2.compile or find the .deb mplayer-vaapi and install it.
3.add -vo vaapi -va vaapi to the mplayer command line in gnome-mplayer.
My question : is that correct or did I miss something? Do I have to compile latest libdrm and libva or the ones from the squeeze repo will be good? Do I need kms enabled, i.e. install firmware-linux-nonfree?
I have 9.10 64 on a HP TX2020 laptop, with NVIDIA GeForce 6150. I can't get twin monitor to work. When I go into Nvidia X Server, it doesn't recognise the tv over s-video. According to a lot of the forums I've searched, there should be an option to enable xinerama, which there's not. I know I should study this more and I will, but getting simple things to work takes so long on this OS and I'd really just like to see a movie.
View 2 Replies View RelatedWhen I used Hulu Desktop on my old integrated VGA video output, it played fairly well. Now I got a new video card and connected my monitor and installed the latest drivers and it doesn't play as well, it buffers and I don't know how to explain the rest.
View 9 Replies View RelatedOpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
I see that whenever I try and run a video, the system defaults to try and run it in Banshee.Banshee, though, sits there with a black screen and the information on what it is supposed to be playing. Clicking the Play button does nothing. This includes OGG (OGV?) video files.Does anybody use this feature in Banshee and got it to work?
View 1 Replies View RelatedFullscreen video playback doesn't work in MPlayer. I don't know if or where this should be reported.
mplayer 2:1.0~rc3+svn2
Ubuntu 9.10 on i386
Code:
mplayer -vo gl filename
[URL]
I'm trying to get the screen graphics working correctly on a newly purchased ACER Aspire 7740G laptop. It has a 17.3" 16:9 screen with an ATI Radeon Mobility HD5470 512MB graphics card.
The command LSPCI in Terminal gives.....
"02:00.0 VGA compatible controller: ATI Technologies Inc Device 68e0"
I've also uploaded /var/ log/ xorg.0.log.
In System/Preferences/Display the pink coloured monitor screen has 'UNKNOWN' displayed on it with only 3 resolutions available.
I installed the ATI Catalyst Control centre but when it initialises, it produces an error saying that there is no driver installed - I thought the XORG log shows that the driver is installed.
The command ATICONFIG in Terminal reports.........
"aticonfig: No supported adapters detected" !
I was wondering if you could help me out with this Flash problem: sometimes, Flash elements don't play in my browser window - there's just a big white area where my Flash should be. I have to close and re-open Firefox. This especially happens when I activate the "Flashblock" plugin, a very useful tool that blocks all Flash unless you click on it and choose to play it. Whenever I have that enabled, most of the time, clicking on the "play" button produces the white area where the Flash object should be. It's Karmic 64 and Firefox 3.5, Shockwave Flash 10.0.
View 2 Replies View RelatedIn Ubuntu 9.10, I was successfully able to use my Pinnacle Dazzle DVC 100 (a cheap USB analog video capture device). I use it for backing up old video that is stored on tapes, and it isn't working with my current install of Ubuntu 10.04. When I plug the device in, it should be detected and the em28xx module should be loaded. This fails and /var/log/messages has the following:
Code:
Sep 25 16:13:18 kernel: [1196215.111898] usb 2-2: new high speed USB device using ehci_hcd and address 20
Sep 25 16:13:18 kernel: [1196215.266097] usb 2-2: configuration #1 chosen from 1 choice
[code]....
i had an nvidia geforce 6800 card in my pc and that just all of a sudden stopped working (the screen went blank) so i went to my onboard video and it works but no matter what video card i install, it doesn't work (still a black screen) and i know the cards work on other pc's but just not this one. i've tried different ati cards and nvidia cards with no luck. i've also wanted to disable my onboard card all together but my bios doesn't have that option for some reason. i also thought that it might be the slot but when i install the video card in the pc, the fan works so it's not that.
View 4 Replies View RelatedAfter installing proprietary graphics drivers for AMD A-50 APU graphics performance has been greatly increased. But two new problems have come up.
1. While playing video files clicking menus doesn't show anything, the video forcibly overrides the menus.
2. Videos always take the focus over other windows and applications.
For example, see the attached screenshot where actually terminal should come to the focus, but the video is overriding it.
I been looking on Google to convert videos to mp3 audio and all I get is just a video conversion from one format to another and some things I installed just get error messages so I took them back off. Anyone know the proper syntax in Mencorder to convert a video just to audio? Or any other program I can use that won't cause this much trouble?
View 7 Replies View Relatedwhen i try to play a video, from internet it is showing the message 'Either javascript turned off or download and install latest adobe flash player'. But eventhough I downloaded and installed adobe flash player I am unable to play any video and still it is giving the above message. what is the reason?
View 2 Replies View Related
