I have configured g2ipmsg-0.9.6.But when i am trying to run "g2ipmsg" executable from command line,i am getting following error:
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
[code]....
i have to use g2ipmsg to connect over lan with windows pcs ,how can i allow it through my firewall i have tried opening 2425 port bur it is accompanied by a service that i don't know and g2ipmsg doesn't work with 2425 open so i guess there is an option to let an application through firewall is it okay to run dc++ with firewall passive mode or i should open a port.
View 1 Replies View Relatedhow to send attachments in G2Ipmsg.
View 1 Replies View RelatedI am using Fedora10.I have installed g2ipmsg using "g2ipmsg-0.9.6.tar.gz".The installation was successful.But when I execute it I cannot see any other user in the users list inside g2ipmsg , other than myself (It uses the 'lo' and not 'eth0').Messaging with myself is successful.ipmsg.exe works well in Windows , I don't have to make any settings there.Here in Linux I made the settings as:settings->preferences->External representation of IPMSG character code to 'GBK'.
also when I run the application following things are printed:
root@nameserver# g2ipmsg
Error : [fileubcrypt.c line:1307 ] Can not store key: length: 0
[code]....
Actually we are use windows n fedora flavors running g2ipmsg (lan messenger) to communicate in cross platform but one of the machine having g2ipmsg is not working fine. It always gets hangs when we open or minimize ipmsg window. i had tried deleting the source file and tried to install new one but it never fix the problem
NOTE: i guess lib file got affected but im not sure.
[code]...
how to fix the problem?
While trying to run avi file using totem, I get error. As I tried to "search" as used by totem, I get:
$ totem A Walk To Remember.avi
** Message: don't know how to handle video/x-divx, divxversion=(int)3, framerate=(fraction)2997/125, width=(int)640, height=(int)272
** Message: don't know how to handle audio/mpeg, mpegversion=(int)1, layer=(int)3, rate=(int)48000, channels=(int)2, codec_data=(buffer)010002000000880101000000
** Message: Error: You do not have a decoder installed to handle this file. You might need to install the necessary plugins .....
How can I get the codecs?
I get this error if I try run any video file [URL].
View 4 Replies View RelatedI keep getting this error when I try to run the auto update. b43 conflicts with broadcom-wl
View 2 Replies View RelatedWhen upgrading from fedora 10 to fedora 12 (after reboot and during installation) I get the error message as - Error running transaction - you need more space on the following file systems : 23 M on /mnt/sysimage/boot
After this installation stops.
I checked /mnt , there is no folder as sysimage . Please suggest how to proceed further ?
I get this : Code: [root@Fedora philip]# gedit (gedit:3132): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)
GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I now tested it being not root and it's ok:
Code:
[philip@Fedora ~]$ gedit
[philip@Fedora ~]$
No error when I'm not root. So it's only when I become root and run gedit in terminal I get errors, why?
I am a final year BE student. I am working on the ehci-0.6 library for tracking the the face in fedora 13 in vmware. I am able to compile the code but could not run the sample programs. The error is as follows. After I compile the program:
cd ehci-0.6
./configure
make
I am able to do the above with out any errors. Later when try running samples. I am getting the below errors:
cd samples
make
./simple2d
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element appsink1, but it is in ready instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element ffmpegcsp1, but it is in READY instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
OpenCV Error: Unspecified error (unicap: failed to get info for device
) in CvCapture_Unicap::initDevice, file /builddir/build/BUILD/OpenCV-2.0.0/src/highgui/cvcap_unicap.cpp, line 139
terminate called after throwing an instance of 'cv::Exception'
Aborted (core dumped)
and but ven tried using
./samples/simple2d
the error I am facing is "could not initialize the capturing"
How to overcome this kind of error. Blank window opens and goes on showing the error mentioned above and ends ven given ctrl + c. The expected output to open a window and display the capture the person present in front of the webcam and print d coordinates of the face captured.
I have been a regular user of Linux and have never faced a problem like this one, after I installed Linux Fedora 14 on my laptop. After installation, almost all the softwares that I was earlier using with the earlier version of Fedora are stopping immediately on starting and exitting with a fatal error. eg. when I try to run paraview, it immediately closes after giving some fatal error. Similar is the case with gambit, tecplot and mayaVi softwares.With my earlier version of Fedora, I was not facing any problem. But since I installed Fedora 14, I am facing this problem. I even tried by downloading and installing latest version of paraview and mayaVi from the net, but the latest versions also on starting give the same error : fatal error, and exit the program.
The softwares I mentioned immediately close indicationg a fatal error. The following error messages appear in the console after abrupt shut down of softwares with fatal error :
Output of /var/log/message file:
After starting the Nvidia driver installer I get the error message "please exit x before installing". I read the manual page for X. From the console I typed X -terminate. I get the error message "Fatal server error" "Server is already active for display 0". how to exit from X.
View 3 Replies View RelatedSometimes I connect to my Debian box from another computer (using SSH on Cygwin or Linux), and once ina while I want to run some console apps. And sometimes some of these apps might complain about "another intance, Error: an instance of newsbeuter is already running (PID: 2496)". Is there a work around for this issue at all(without killing the original instance") ? The reason I do not want to kill the app because there might be 2 users connected to the same machine that might be using the same app.
View 1 Replies View RelatedI need to install VMWare Workstation on Fedora 13, but I keep running into the following error -
"C header files matching your running kernel were not found...."
It's looking for 2.6.33.3-85.fc13.i686 but when I did a - yum install kernel-devel I got 2.6.33.5-124.fc13.i686
when I do - yum install kernel-devel `uname -r`
I get the following -
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package kernel-devel-2.6.33.5-124.fc13.i686 already installed and latest version
[code]....
I am using Gstreamer for creating one of my video streaming application. My application creates multimedia session and then stream around 200 video sessions (a very processor intensive job).In doing so, the no. of threads created is around 1500 and I have given around 1536 KB as my stack size for each of these threads. I have one Quadcore(intel Xeon) system of around 8 GB of RAM(64 bit) with RHEL 5.5(kernel - 2.6.18-92.el5). After few hours of testing I see that my overall memory(RAM) is eating up. I did checked the memory and I saw that my cache size is growing. So far so good, as I can understand that system does cache instead of leaving some RAM free.
My problem comes, when I see that after almost 20-25 hours of testing, RAM is continuously being eaten up and maximum part of that is going into cache. If I leave the system for few more hours I see whole of my memory is consumed up and now my swap started getting used. If I check the cache now, I clearly see most of RAM is now in form of cache. I still didn�t stop my application and allowed it run for few more hours and after sometime I see that process give segmentation fault while creating the pthread (create_pthread::unknown error 513).I also tried to observe the �core� file of application created in this way , but it doesn�t� show anything.
One thing I must mention that, in �top� I see almost constant values of resident memory, virtual memory and shared memory. There is no increase of memory usage here. So here I can assume that my application is not leaking the memory. I also observed that if I kill my application any time during this, the memory doesn�t go into free pool. Anyone, here can give any pointer for this kind of behavior. Is it can be because of some kernel BUG which is not freeing the memory to application usage.
1. I managed to get the wusb100 working correctly for a few days. 2. At that time, I was also getting a yum update error: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: kernel-uname-r = 2.6.27.41-170.2.117.fc10.i686 is needed by (installed) kmod-rt2870-2.6.27.41-170.2.117.fc10.i686-2.1.2.0-4.fc10.1.i686 kernel-uname-r = 2.6.27.41-170.2.117.fc10.i686 is needed by (installed) kmod-ndiswrapper-
[Code]...
I login as normal user. I can 'su root' fine - password authenticates. However, If I try to run System->Administration->Users/Groups, when it asks for root password, it is rejected. When I run updater, it reports failure to authenticate, but doesn't even ask for root password beforehand. Is there a cached password someplace?
View 7 Replies View Relatedi installed yumex:yum -y install yumex, when i start yumex it came with this error:fatal error:backend-not-running backend not running as expected (yumex will close) how can i solve it?
View 10 Replies View RelatedI am using a custom OpenVPN install using 7zip. It installs the program and unzips the keys and configuration files to the correct location. This is being installed by an administrator and needs to work for non admin users. Before there was an issue about not pushing the routes correctly and I am going to get around that by adding the users to the Network Config group which will allow them to add routes but not a whole lot more power. Now I am getting the error "Error opening logfile for writing C:Program FilesOpenVPNlogclient.log.
You probably don't have administrator privileges, which are necessary to run OpenVPN." Is there anyway around this? OpenVPN still works even though this error occurs so is there anyway to just turn the error off (changing verb to 0 does not work) or recompile it to ignore this error? Is there anyway to change the logging location to event viewer or another directory such as C:Users\%currentuser%OpenVPN.log (when I try to do this with log or log-append option it throws another error and doesn't work so I would prefer event viewer so there wouldn't be any permission issues).
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
After "yum install emacs" & "yum install emacs-ess", I was able to install emacs on my X86_64 running Fedora 10.
If I run one session of emacs everything works fine.
Once I start a second session and try to resize or move the emacs window, the system stops responding.
I am trying to get flasH player for my iceweasel. Getting error saying I am running on an amd platform. I was under the impression an amd distro wont even install on an Intel system.I am a 100% that my hardware is Intel.Here is what uname -a gives me.
Code:
sudo uname -a
[sudo] password for siawacsh:
[code]....
i am getting this error while running in rhel 5.3 -bash: sar: command not found
View 5 Replies View RelatedI have a VPS built with CentOS 5.4 64 bit, and I use it as a webserver (httpd & lighttpd)and mysql server. I used Jason's Utter Ramblings Yum Repository to install the latest PHP, apache, subversion, and mysql. However, I got problems afterwards when I try to run 'yum update' via SSH.
View 2 Replies View RelatedThe error is as follows:
kernel: Uhhuh. NMI received for unknown reason 3c on CPU 0.
kernel: Do you have a strange power saving mode enabled?
kernel: Dazed and confused, but trying to continue
~$ sed s/^bb/bbbbbb/ foo1.txt
~$ sed: -e expression #1, char 3: unterminated s command
~$
Where 'b' stands for space. What is the error here? Sed is running under bash.
Nothing serious (I think), but everytime I run apt-get to remove programs and doing upgrades... I get a strange message.
This is the output of apt-get upgrade:
Inspiron1525:/home/hernan# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
iamerican ibritish
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
17 not fully installed or removed.
After this operation, 4030kB disk space will be freed .....
And this is the output I get when removing a program (I removed amor so I can show the output):
Inspiron1525:/home/hernan# apt-get remove amor
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
amor iamerican ibritish
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
17 not fully installed or removed.
After this operation, 6185kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 89741 files and directories currently installed.)
Removing iamerican ...
/var/lib/dpkg/info/iamerican.postrm: line 6: /usr/sbin/remove-default-ispell: No such file or directory
dpkg: error processing iamerican (--remove):
subprocess post-removal script returned error exit status 1 .....
E: Sub-process /usr/bin/dpkg returned an error code (1)
When I run update, I don't get the error though.
I got the following error window (screenshot attached) while running Update Manager. What does it mean?
View 1 Replies View Related