Software :: Fatal Error While Running Softwares In Fedora 14
Jun 24, 2011
I have been a regular user of Linux and have never faced a problem like this one, after I installed Linux Fedora 14 on my laptop. After installation, almost all the softwares that I was earlier using with the earlier version of Fedora are stopping immediately on starting and exitting with a fatal error. eg. when I try to run paraview, it immediately closes after giving some fatal error. Similar is the case with gambit, tecplot and mayaVi softwares.With my earlier version of Fedora, I was not facing any problem. But since I installed Fedora 14, I am facing this problem. I even tried by downloading and installing latest version of paraview and mayaVi from the net, but the latest versions also on starting give the same error : fatal error, and exit the program.
The softwares I mentioned immediately close indicationg a fatal error. The following error messages appear in the console after abrupt shut down of softwares with fatal error :
Output of /var/log/message file:
View 4 Replies
ADVERTISEMENT
May 24, 2010
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
View 2 Replies
View Related
Apr 3, 2010
I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".
View 1 Replies
View Related
Sep 18, 2010
I've managed to convince a few of my Backgammon playing buddies to try Linux as an OS and they're impressed with it. However there doesn't seem to be a Backgammon software available which performs well on Linux. We've tried running Windows Backgammon softwares on Wine but these don't perform well if at all. Will there be a Backgammon application available for Linux soon or is it available in Software Manager under another name? In the meantime does anyone know of one which will work well on Wine for now?
View 5 Replies
View Related
Dec 8, 2009
Last night software updater notification showed 29 updates. I was building a liveCD image so decided create the image first then install the updates. After the updates were finished, I did a reboot because some packages required it, I logged on successfully, then I shutdown for the night. This morning when I executed the same command used to create the liveCD image, I get the following error.
[Code]....
View 3 Replies
View Related
Jun 25, 2009
I updated the latest kernel and other new maintenance tonight and started getting this error at boot...doesn't appear to be hindering anything. My encrypted partitions (luks, ext4) still open and are accessible.
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.29.5-191.fc11.i586/kernel/drivers/crypto/padlock-sha.ko): No such device
See similar errors reported on ubuntu forums... with various recommended workarounds... update/add an alias, blacklist a module, fresh install
View 13 Replies
View Related
Nov 13, 2010
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
View 5 Replies
View Related
Jul 9, 2010
I installed fedora 10 on my laptop. But I am getting this error when it is booting up:
Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0
[code]....
View 5 Replies
View Related
Jun 14, 2010
Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8 While giving modprobe zd1211rw following FATAL Error throws;
[root@localhost linux-2.6.22.18]# /sbin/modprobe zd1211rw //////////////modprobe command
WARNING: Error inserting ieee80211_crypt (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211_crypt.ko): Invalid module format
WARNING: Error inserting ieee80211 (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211.ko): Invalid module format
[Code]...
View 2 Replies
View Related
Jun 14, 2010
Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8)
While giving modprobe zd1211rw following FATAL Error throws;
How to overcome this FATAL Error? What prerequisites need to check?
View 1 Replies
View Related
Nov 12, 2009
I am getting an error from yum update and Kpackagekit:
[root@asus-m4n82 tylerm]# yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
rpmdb: page 18816: illegal page type or format
[code]....
How do I "run recovery"? Edit: Ok so it looks like I had som bad ram in my system that caused this - I found a site that told me to do this:
rm -f /var/lib/rpm/__db*
rpm rebuilddb
yum clean all
I did this but now when I try something like yum install firefox it pulls in a ton of already installed packages.
View 2 Replies
View Related
Apr 13, 2011
I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
View 1 Replies
View Related
May 25, 2011
i tries to upgrade my fc14 to fc15 using preupgrade. during installation packages process i get an error "fatal error bla-bla-bla installing netsniff-ng-...". i've booted in fc14 (in emergency mode) and manually removed old netsniff-ng package and installed new package. after that i've booted in preupgrade process. it finishes successfull. but now i can't boot in fc15 - i get "kernel panic" error. i've opened grub.conf and there is no 'initrd' section and there is no initramfs for fc15 in /boot folder. i've tried to boot fc15 with initrd /initramfs-bla-bla-fc14.i686.PAE.img. fc15 booted, but i think something wrong, because network not working, and there is only "lo" in ifconfig. what can i do?
View 14 Replies
View Related
Dec 8, 2010
I had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
View 1 Replies
View Related
Jun 13, 2009
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
View 7 Replies
View Related
Jul 2, 2010
I've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
View 10 Replies
View Related
Jul 6, 2009
I have installed fedora, the installation very well took place, only I have a problem to reach the system in graphical mode, and when I tap " startx " in the console it shows the following error:
Fatal IO error 104 (connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining.
View 2 Replies
View Related
Nov 27, 2010
I have VIA/S3G unichrome IGP video card of 32MB after installing fedora i am getting very worst resolution of 600x400which is completely irritating so please provide me a way out from this problem to use fedorathe solutions i followed and failed are given below
1. Some one told me to change the xorg.conf file but i failed because there is no such file in the given location
2. Some one told me to create it using system-config-display but for fedora 14 there is no package for that
3. some one told me again of using the command Xorg -configure but it said as followed [root@localhost tmp]# Xorg -configure
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.
[code]....
View 2 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
Dec 16, 2010
I am trying to install FC14 on a Power 1800. I get hte message that installation stoped due to fatal error whn trying to install module.init.tool package.
This is a repetitive error. I burned a new CD, checked it but get the same error.
The exact message is: A fatal error occurred installing the module-init-tools package. This could indicate errors when reading the installation media. Installation cannot continue.
View 5 Replies
View Related
Jul 7, 2011
i always wanted to ask this question is that in windows if we install any program or software ...it is by default stored in c://program files/<package name> but in linux specially in fedora i have installed many apps and compilers ..bt dont know were it got installed were the softwares are getting installed by default in f14 ?
View 3 Replies
View Related
Apr 13, 2011
How to update all softwares(rpms) through internet in rhel 5? give the detailed description
View 9 Replies
View Related
Sep 16, 2010
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
View 9 Replies
View Related
Dec 19, 2010
I am a new user of FEDORA, would like to know how I can install software such as Canon Camera Software, Microsoft Encarta etc provided on CDs and DVDs into Fedora.
View 1 Replies
View Related
May 31, 2011
Ive been messing around on a Solaris box, installing precompiled lib/programs from the repos by extracting them and placing them in my home dir. It seems everything ive tried sofar works, except for irssi. I get the following error:
$ ~/bin/irssi
ld.so.1: irssi: fatal: relocation error: file /export/home0/leem2/bin/irssi: symbol boot_DynaLoader: referenced symbol not found
Killed
I have run:
$ ldd /export/home0/leem2/bin/irssi
and it has no missing libs
View 1 Replies
View Related
Nov 28, 2010
Xorg seems to crash randomly and with no real reason. Once it does, I can't restart it. If I try to restart it with GDM, nothing will happen. However once it crashes, Ubuntu's low graphics mode window pops up. Telling it to reconfigure the xorg config seems to do nothing for my problem. I will still crash after words.
Right now I'm running in an earlier kernel, hoping this will keep it from crasgubg
Here is my xorg log. code...
View 5 Replies
View Related
Dec 1, 2010
I am trying to apply updates, but receiving the following error:
[Code]....
View 5 Replies
View Related
Feb 19, 2011
A recently installed 10:10 displays this message at start up:
FATAL: Cannot load generic modules /lib/modules/2.6.35-25-generic/modules.deb
(As best I can remember.It disappears so fast).
As I am having trouble getting a fingerprint reader to work, I thought I ought get it fixed.e.
View 5 Replies
View Related
Jul 7, 2010
I have a virtual machine (VirtualBox) with Ubuntu 9.10 installed, I'm trying to install MySql community editor using the linux-generic package (the tar package), I followed all the procedure but I had a problem with the next line of code:
shell> scripts/mysql_install_db --user=mysql
I don't understand a lot about the command line, but I think this line of code is used to create the basic tables of the database (users and so on). the problem I got with this line of code is:
FATAL ERROR: Could not find mysqld
I googled it and after a while I found this blog:
azimbabu.blogspot.com/2009/07/mysql-5136-in-ubuntu-904-fatal-error.html
The blog says that the problem is a default instalation of SQL, and the solution is replace the file my.cnf in the location /etc/mysql for other file that comes with the package.
I didn't replace the file my.cnf, I only changed the name and it woked perfectly, and this is the problem, I don't understand why it worked.
Any one knows why this file is so important?What could happen if I delete this file?what is the purpose of the package mysql-common un Ubuntu?
View 3 Replies
View Related
Mar 27, 2011
when installing Wine I got the message 'Fatal error loading rundll32.exe'. keep it simple, I'm a newbie.
View 1 Replies
View Related
