I have two drives on my Lenovo computer. On #1 I have installed Fedora 12. On #2 I have Fedora 9 with a not functioning GRUB bootlloader. I would like to copy a number of directories/files from #2 to #1 but I can't see the #2 drive on #1. What to do?
View 9 RepliesI came in to work today and updated my laptop, which is common for fedora to either update every week or bi-weekly. But now the system has a major delay that is making it unbearable, is anyone else experiencing this? I am running Fedora on a insprion 1525 with dual core pentiums, and 4gig ram.
View 14 Replies View RelatedThe mic is disable/not function and i dont look input connetor (Microphone1&2) on Sound Preferences which accessible from System Preferences > Sound menu. this is the proc codec in my Asus AO722
[code]...
I have a strange problem on RHEL 5.4.
I have created a daemon which is being run as a system service at boot, and the start command goes well. When I login after boot and check with
service name status
it says it's running and the daemon accepts requests from clients in the network, only the executable it runs as a response to a client request does not work properly.
If I manually restart the service, as with service name restart everything works OK until the next system reboot.
Somehow the context in which the daemon runs is not OK after boot, and it becomes OK after manual restart.
I just got a graphics card ATI installed on my fedora 10. I would like to see the functioning of the same with some kind of game. Any suggestions for game under fedora 10 to see the graphics application.
View 1 Replies View RelatedI need static networking to be functional on F14 to try freeipa....the problem I have is I am unable to get eth0 to start. Knowing the software it has to be eth0 or it will likely not work... The guest is in a RHEV6svr environment... So I have disabled NetworkManager and enabled networ and set manula settings in ifcfg-eth0 incl the hware address but eth0 wont start on boot....
next I tried setting a e1000 network card after the hypervisor default didnt work, only to find that this doesnt work either. The MAC addresses are changing as I try and fault find a dead DNS client issue (yet another F14 issue but lets not go there yet, it could be RHEV's "funky" NATing setup)....so I suspect F14 has got its knickers in a twist over the MAC for ETH0....I keep changing it and I suspect it cant keep up.....so I need to disable the automatic function(s), if there is one....
So somewhere down in the code there is probably a line saying eth0= <mac address> but despite greping I cant find that.....or not something that I edit and it then works.... I have tried the gui tools and command line tools and I still have no network..... So what would be a totally CLI process to fix this automated crap? ie stop F14 pointing at the wrong MAC for eth0?
[code]....
I've installed Fedora 14 in a PC. It runs an application where particular event execute by clicking the left mouse button.Problem is that, left button click doesn't work properly. Sometime event executes with simple double click and sometimes after 5-7 double clicks only, event execute.
View 2 Replies View RelatedIm Using FC14 and i like it so far. been trying around a bit and made searches for my problem but either im blind or im the only one with this problem (which i doubt) i have a problem of the keyboard "dying" on me mid using it. it doesnt seem to matter what im doing, it still goes dead on me sporadicly. ive tried changing to 4 different keyboards. PS2 and usb keyboards. but all 4 keeps sporadicly dying on me until i reboot and it works again until its dies.im wondering if the problem is in the hardware detection somewhere..if you need hardware information it would be nice if you posted commands so i understand what you need
View 6 Replies View RelatedI have windows on my box, I have fedora 14 on my external that goes through my usb. Grub is installed on my usb. Since the only thing stored on my external was fedora i really didn't have to do much to it. just go into bios and boot from usb. Now that im using fedora more, Id like to add Vista to my choices. I guess the numbers change once your using an external drive. Ive read some of the problems like mine but they didn't quite do it. Im going to inclose 2 screen shots of my drives/partitions and my grub.conf.
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 Replies View RelatedI just tried to install F13. I can't install grub to any drive other than that which F13 gets installed on. When I click on the drop-down menu, only /dev/sdd is available.
View 4 Replies View RelatedI have created usb stick from which I install fedora. The bootloader is on the MBR of the usb stick and I want to put it onto the harddrive.I have tried running grub and setting up the MBR on the hard drive, but attemts to load the kernel fail with "Error 15: File not found".
View 2 Replies View RelatedI have installed Fedora-9 and i customized my kernel. But i did a big mistake in the last steps while customizing. Unfortunately i have executed below shell cmd. grub-install /dev/sda windows drive is not visible But /dev/sda3 is a windows vista file system, now sda3 file system is not in visible for both in linux and also vista OS. How can i retrieve my data back in vista sda3. Here is the info of system
$ su -c '/sbin/fdisk -l'
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I've been away from Fedora for a long time, since FC3/4. I seem to recall that at that time grub in Fedora used the standard drive notation such as /dev/sdax instead of the current UUID. Can anyone tell me why this change was made?
Seems to me that using UUIDs presents severe problems if a drive has to be replaced as the restore media (we all backup, don't we?) would not work without modification. How does one determine trhe UUID of a new drive to change the restore media? Sounds like a chickenand-egg routine. There must be some way which I haven't run accross yet. I do notice through experimentation that the standard notation still works, at least in /etc/fstab.
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
Installed Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
I have had Fedora 14 running well on my Dell Latitude XT. All was good until I created an NTFS partition and attempted to install windows XP on it. The installation failed, then when the computer boots i get:
"Error Loading Operating System"
I have attempted the following:
1) FedoraLive from USB then :
Code:
[root@localhost liveuser]# grub-install /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
2) I tried:
Code:
# grub-install --recheck /dev/sda
Probing devices to guess BIOS drives. This may take a long time.
/dev/mapper/../dm-0 does not have any corresponding BIOS drive.
we have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI've got what appears to be a clean install of 64 bit F14. Which drivers, etc. do I have to install to make my Lexmark X5650 "all in 1" printer/scanner/FAX functional?
View 2 Replies View RelatedHow do I troubleshoot my right Alt key to function.
Using Debian GNU/Linux Lenny 5.0.3 with a Gnome Desktop. My keyboard is A4tech KBS-720.
System->Preference->Keyboard Layout is set up to USA alternative international
Other than that, I'm not sure where to configure such. Using the keyboard on another computer, all keys works.
Have a Ritmo USB webcam which i cant seem to get functioning. Works ok with windows but who wants to do that?
View 1 Replies View RelatedI just switched to a usb mouse in slackware 10.2 and after installing it and configuring it still keeps jumping all over my screen.Currently I edited xorg.conf to:
Code:
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
[code]...
I recently upgraded to Jessie and am using the LXDE desktop. I like using the keyboard power button to shutdown the system but it does not work. I looked at /etc/acpi and everything appears okay to my untrained eyes, but there is obviously something not working correctly. Do I need to edit some config file or install some code in order to use the power button for shutdown ? When I look at Services Settings I see that acpid power management is selected.
View 10 Replies View RelatedI found that in many occasions ice weasel browser stops functioning (not responding) and the only way out is by killing the process.secondly, the process ID is actually firefox!! and no ice weasel process, cause ice weasel is just another name to firefox; and this stopped me from installing firefox.Unfortunately, when I used Konqueror which comes with every linux distro, it gave the same problem.
View 14 Replies View RelatedIf you do, please let me know what sound card you're using. I'm beginning to think its the driver. All kinds of weirdness in early bootspace and also alsactl init fails with a missing init directory for the device.
I'm on a Creative Labs Soundblaster Audigy SE and it's completely non-functional. I've seen bugs reported with the audigy LS but never the SE.
The command and error message:
gtwy ~ # ip rule add from 64.251.23.186 table t1
RTNETLINK answers: Operation not supported
Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html
I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux.I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers.iproute2 is installed:
gtwy etc # emerge --search iproute2
Searching...
[ Results for search key : iproute2 ]
[ Applications found : 1 ]
[code]...
I've got a Toshiba Satellite L25-S199, and it includes an Atheros wireless NIC based on the AR2413 chipset, I believe. Currently I'm running OpenSUSE 11.4 on it, but I've previously had Xubuntu and Ubuntu, and this problem has always existed with WPA2.
Specifically, the LAN is a wireless WPA2 with AES encryption (no TKIP). The computer can connect to the network just fine, but the web is all but unusable; it is very finicky, mostly failing to fetch any pages, but sometimes succeeding (mostly with Google pages, and those from the local network's servers). Perhaps a DNS issue?
This problem doesn't occur with WEP or no encryption.
Here's the output of lspci
09:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
And the relevant output of hwinfo
22: PCI 904.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.SufKn0XT2bB
Parent ID: qscc.hTSZxA6Z5F6
[Code]....
So I was messing around on my laptop this morning and I noticed that my desktop effects were turned off. So i decided to turn them on but as soon as i pressed the "normal" option a pop up opens up and says "searching for drivers" then the screen flickers and finally it tells me "desktop effects cannot be enabled". Also my compizconfig wasn't functioning. for exmaple: I turn on wobble windows and nothing happens. No wobble windows.
View 6 Replies View RelatedI have upgraded from Pre-installed Xandros to Ubuntu 9.10 on my Eeepc 701 and my camera is not been detected, even checked the BIOS, where the status is shows as "Enabled"...
View 2 Replies View Related