I just got a graphics card ATI installed on my fedora 10. I would like to see the functioning of the same with some kind of game. Any suggestions for game under fedora 10 to see the graphics application.
View 1 Replies
I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.
The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:
Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)
We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.
[Code]..
I've recently been experimenting with glxgears, but found people saying this is not an ideal benchmark tool as there are many variants; for example resizing the window affects the FPS tremendously.
I'm interested in testing the difference between using the proprietary ATI driver and the open source driver and also the performance under various distributions.
What's the best software to benchmark graphics cards?
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have all of the code written for a text based game but how big of a leap is it from text to graphics? lets just say a 2d engine. Is this a fairly easy task or would it be a bit of effort? I've never done anything with graphics before and would just like a quick idea of how much of a project is graphics vs functionality.
View 5 Replies View Relatedi was wondering if anyone else was experiencing any flickering with flash? for instance, if you're playing a game, some of the objects and graphics in the game randomly flicker, or if you're watching a video on videos with annotations, the annotations frequently flicker.
View 9 Replies View RelatedMenu working normally, game crashes on level loading:
Code:
]map wca1
Opening UDP/IP socket: *:44400
==== G_Init ====
------- Server Initialization -------
[code]...
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedI've got a Toshiba Satellite L25-S199, and it includes an Atheros wireless NIC based on the AR2413 chipset, I believe. Currently I'm running OpenSUSE 11.4 on it, but I've previously had Xubuntu and Ubuntu, and this problem has always existed with WPA2.
Specifically, the LAN is a wireless WPA2 with AES encryption (no TKIP). The computer can connect to the network just fine, but the web is all but unusable; it is very finicky, mostly failing to fetch any pages, but sometimes succeeding (mostly with Google pages, and those from the local network's servers). Perhaps a DNS issue?
This problem doesn't occur with WEP or no encryption.
Here's the output of lspci
09:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
And the relevant output of hwinfo
22: PCI 904.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.SufKn0XT2bB
Parent ID: qscc.hTSZxA6Z5F6
[Code]....
I installed 10.04 today, not having used this system for Ubuntu since 8.04. My wireless card (Texas Instruments ACX 111) worked perfectly in Windows XP and 7, and it worked on installation in 8.04.
I did a clean, full install of 10.04 (no dual boot or anything), but the wireless card is not working. The OS doesn't even seem to recognize that it is there because I can't even scan for networks, let alone connect.
The only reason I have a connection on this computer is because I am sharing the internet via ethernet from my Macbook.
I need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.
View 2 Replies View RelatedI have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I'm running openSUSE 11.4 on an HP 630 laptop with KDE. Everything works fine but cards inserted into the internal SD card reader are not read, and from what I can tell the reader is not recognized at all by openSUSE on my system. The reader does not appear listed in hardware information and is not listed with the command fdisk -l . There appear to be no references at all to the reader. The reader is recognized, however, on a live USB of Linux Mint 11, where the model is listed as "Generic - xD/SD/M.S." (the vendor too), revision 1.00. It is listed as an SCSI Controller scsi5. Typing lsscsi in the termal of openSUSE provides the following:
Code:
linux-mlxx:/home/eve # lsscsi
[0:0:0:0] disk ATA Hitachi HTS54323 ES2O /dev/sda
[1:0:0:0] cd/dvd hp DVDRAM GT30L mP06 /dev/sr0
lspci provides:
[Code]...
I tried to run the XBMC live disc but could not fully boot. Each time I could only get to a command prompt after the XBMC splash screen with spinning circle. So I thought, "Maybe because my computer is sort of old (Pentium 4, 2.26 Ghz, 512 RAM) it doesn't like the XBMC Live disc. It will probably work if I install to the HDD." I installed it only to get the same result, XBMC splash screen then loading of command prompt. Does anyone know how to fix this? Is the computer compatible?
View 1 Replies View RelatedI was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
View 3 Replies View RelatedIf I were to get a new graphics card for my computer so it is fully compatible with linux. My budget is not over 170 dollars. These are the details of my computer....
Hewlett Packard company
Compaq Presario
AMD Athlon 64 Processor 3500+
2.20 GHz, 2.00 GB of Ram
Motherboard Info. [URL]
Video Card- for more info [URL]
Radeon X700 series
Radeon X700 series secondary
I just want to know if Fedora 14 is compatible with AMD M880G graphics card.Fedora 13 did not work.
View 2 Replies View RelatedI am running Fedora 13 with a motherboard that doesn't have onboard graphics, so I had to put a PCIE card in to do the install.
However, I am using the box as a file server so I don't need graphics, and would like to be able to use the PCIE card for another computer.
So I took the card out and powered on, waited about 3 minutes and then typed in the login details. I then tried to SSH into it from another computer and couldn't connect, so it must not have booted up properly (I tried a few times to make sure).
I have read about a similar problem that occurs on Fedora 9 when there is no monitor attached - this is apparently solved by adding "nomodeset" to the grub entry, but that didn't work.
There is no X or Gnome/KDE installed and the default runlevel is 3.
PS - also, usually when the power button is pressed there is a pause before it powers off, but without a graphics card the power button turns it off immediately no matter how long you have waited.
Is there away to update my driver. In my Xorg.conf all I have under driver is "Intel" I am using an Intel GM45 card and I don't have 3D support.
View 14 Replies View RelatedI have the latest everything (kernel, nvidia drivers and kde) and there seems to be a problem in that if I click on the K menu, or grouped windows in the taskbar, or anything in the notification area which causes the computer to freeze for 7 - 12 seconds. Anyone have any ideas what could be causing this?
It's an AMD 64 dual core with a GeForce 210 pci-x graphics card. The issue happens either with out without compositing.
I've installed f11 on my machine and am wondering how to control the fan speed for my graphics card, its a asus EAH4850 (single slot, fan starts automatically at around 10% speed).
The card goes at around 85 degrees Celsius with stardard speed with no 3d, and 110+ when running any 3d application, wich then causes it to not respond. i have to set it to around 60% speed for safe temperature.
I'm used to windows, there i could either use the asus smart doctor or the catalyst control center to adjust fan speed, i'm looking for a linux alternative.
I'm going to be building a new desktop computer and I'm trying to decide between either an ati or nvidia graphics card. I've previously only used integrated intel graphics in my laptop and I've never had any problems. However, from looking at the forums it looks like neither ati nor nvidia will be quite as smooth. What's the current consensus for ease of use?
View 1 Replies View RelatedThe specs on my Pavilion DV6 says it has a 5650 Radeon HD card.lspci shows:01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]02:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (rev ff)TWO cards? Currently the first one shows up in the system information but, knowing it has a 5600 series card,I'm guessing the laptop has a cheaper model with a 4200 integrated card where mine has a 5650 added...thus both showing up. I need to figure out a way to ignore the 4200 card and use the second.
Both drivers are contained in the same package from Radeon. The system information shows VESA:M880G as the driver. How do I go about blacklisting the M880G driver so the other one ('Redwood', guessing from the content of the lspci output) can be loaded?Or am I completely wrong about what needs to happen here? I do not see anywhere in the bios where I can deactivate the 4200 chip.[edit] After checking the specs on the laptop (and it's other derivates), i twould seem that there is no 4200 series card on any of the cheaper machines....no sure hwat gives. I've downloaded some stuff on X and see if I can create a xorg.conf that will load the appropriate driver.
I'm likely going to remove the akmod proprietary drivers and go with the open source 'radeon' for a while to see how it goes.[/edit]EDIT 2:The thing thats going on here is 'hybrid graphics' which I had heard of in desktop but didn't realize that it was in laptops.There is currently work going on to get the configuration working properly. The 4200 card is supposed to run when on batteries and switching automatically to the 5650 when the power is plugged in.
Last night installed Fedora 12 64 bit KDE, but can't find the correct drivers for the above graphics card.
View 1 Replies View RelatedI want to install a new graphics card, Nvidia Geforce 9400 GT, into my system running Fedora 12, x86_64.
* Should I install the hardware into the system first?
* Or should I download the proper drivers and install them first, before hardware?
* Do I need to disable or remove drivers for my integrated graphics card (Integrated NVIDIA GeForce 6150 SE graphics) before I do anything?
I am thinking about buying a new computer. It has ATI Radeon HD 3000 Graphics. Does Fedora 14 support ATI Radeon HD 3000 Graphicst? Will I have to install a driver and if so where would I download the driver?
View 4 Replies View RelatedAfter a fresh install of F12 on pc with Riva TNT2 Model 64 graphics card, Login hangs once booted.
Worked fine on f11.
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
