Fedora Installation :: MP3 Sound Not Functioning With 11 / Cant Get The MP3 Files To Produce Sound?
Jun 21, 2009
Installed Fedora 11 successfully, but I cannot get the MP3 files to produce sound.
Have tried the default configuration for sound, the Pulseaudio and the PulseAudioSoundServer.Installed and use KDE interface. Sound works for SKYPE (after selecting HDAIntel) and the Firefox 3.5 Beta 4.
Below are the configuration details.
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphic(rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02
code....
View 4 Replies
ADVERTISEMENT
Apr 4, 2010
I recently bought a new laptop. compaq presario CQ41 109AU. It does not come with a pre-installed OS so i've decided to put an Ubuntu on it[karmic koala 9.10]. I successfully completed the installation procedures. however, it does not produce sound when loggin in and playing music files. I gone to look if the settings where put to mute, but they were not. I tried installing a MS Vista in the other partition and the sound worked.
View 1 Replies
View Related
Oct 5, 2009
i just had to switch from 10 to 11 until 12 comes out, and after setting up asterisk, i noticed VERY VERY BAD sound quality, mostly comprised of severe jittering. I noticed that the way Fedora lets you work with your sound devices in 11 is way different (nicer, but obviously not complete) than ever before, and i am using the same asterisk configs as before, so i'm positive that this is NOT an asterisk issue, and does NOT really belong in this forum; however, only asterisk users will be able to replicate or identify with this issue.
Have any of you 11 users had this happen to you, and if so, did you figure out how to solve it? I'm sure that i can *try* adjusting asterisks jitter buffer settings, but like i said, it was NEVER an issue before 11... Another clue would be that i cannot get crap like gtk-recordmydesktop to produce sound (but that may very well be another issue; however i doubt it)...
View 3 Replies
View Related
Dec 15, 2010
Kernel 2.6.21.5, Slackware 12.0
Xfce 4.4
For example I've just issued 'mplayer foo.flac' and I do not want an error made by me while in the GUI to issue a loud sound notifying me the error and putting in risk my speakers.
View 8 Replies
View Related
Mar 20, 2011
I am using Ubuntu 10.10 x64 on a Dell Studio XPS
I am unable to get JACK to make any sound from any of the applications which plug into it.
Code:
lspci:
me@TheComputer:~/Desktop$ lspci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
me@TheComputer:~/Desktop$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
[Code]....
View 6 Replies
View Related
Jun 13, 2010
I'm running 10.04 (64bit) on an hp dv6915nr and sound has been working great for the past few weeks. When I started the machine up today, it wouldn't play any sounds and the sound preferences show no input devices. Output devices lists simply "Dummy Output".
The only thing that I believe to have changed recently is updates. I installed a set of updates a day or tow ago. I hadn't used anything requiring sound immediately after the update, so I'm not sure if the updates were the issue.
View 1 Replies
View Related
Nov 8, 2010
Sound problems in Fedora 14.
Before Fedora 14 i have Fedora 12 and all was ok with sound. Starting with root account surprize i have sound. But after playing a song in xmms, sound is dead. I have tested sound in Windows and is ok.
View 2 Replies
View Related
Jul 30, 2010
Yesterday I installed openSUSE 11.3 on a desktop PC and I noticed that the PC's speaker it's not functioning but if I plug the headphones I can hear the sound system working.
View 8 Replies
View Related
Aug 3, 2010
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
View 4 Replies
View Related
Mar 24, 2010
After installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
View 7 Replies
View Related
Jul 28, 2009
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies
View Related
Jan 14, 2010
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
View 1 Replies
View Related
Aug 22, 2010
New Ubuntu installation with a big problem: no sound.
OS: Ubuntu 10.4.1
Hardware: HP Pavilion Elite e9150t (64 bit)
Sound card: Creative Sound Blaster X-Fi Xtreme Audio
Preliminary checks of sound level settings and obvious dumb stuff but there is still no sound. The problem seems to be that the system does not recognize the existence of the sound card and insists on using alternative audio devices.
[Code]...
View 9 Replies
View Related
Jul 3, 2011
I don't know what I did but I lost all audio. I'm running F15 with gnome 3. By opening system settings and then sound I don't find anything muted. Under hardware I have 3 devices, the first is RS880 Audio Device (Radeon HD 4200) this one has no sound at all when I click test speakers. Then I have quickcam comm STX and then I have Internal Audio which works by clicking on test speakers.. I have no clue of where to start to fix this but reinstall everything again.
View 1 Replies
View Related
May 30, 2010
I'm using a HP 7100 laptop and have tried installing the latest versions of Suse, Mandriva, as well as Slakware and have repeatedly been faced with two problems: .1. No Sound: Research via the web suggests that the lack of sound MAY BE due to the particular HP laptop model but there is a doubt here. Sound does work with the Winow$ 7 software but it does not work with any of the above noted Linux softwares. Are any of you familiar with this? .2. KPPP: Are any of you using KPPP with the latest version of Fedora, using KDE4? If so, how did you get it to work?
View 1 Replies
View Related
Jun 12, 2010
My PC has the ASUS P7H55-M SI motherboard with the audio chipset VIA VT1708S. Under Fedora 13 (64-bit) I have no sound although the audio chipset seems to be properly recognised and supported by the OS.
I used the alsmixer application and I set the volume for all channels, including PCM to their maximum value but still I get no sound. When the OS boots I hear a "click" sound coming from the audio chipset when it is initialised by the kernel but then the sound stops and I hear nothing.
Note that I do not have this problem with Ubuntu 10.04 but I have the same issue with openSUSE 11.3 Milestone 7. My guess is that F13 and openSUSE 11.3 having newer kernel/alsa software versions exhibit this problem due to some bug introduced to the code.
Here is some extra information:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
[Code].....
View 1 Replies
View Related
Jul 12, 2010
It seems that i have to install the win32 codec package in order to play .mov files with xine !! how can i install these codecs ?
View 11 Replies
View Related
Dec 13, 2009
I have worked the whole day to get an multimedia player that plays all format's. After trying vlc, realplayerGold, Xine, Kaffeine, Rhythmbox and Totem, I ended up at kaffeine.
I virtually installed al gstreamer-plugins,, like:
Code:
Dependencies Resolved
Package Arch Version Repository Size
Installing:
gstreamer-plugins-bad i586 0.10.13-7.fc11 rpmfusion-free-updates 1.1 M
gstreamer-plugins-bad-devel i586 0.10.13-7.fc11 rpmfusion-free-update 15 k
gstreamer-plugins-bad-devel-docs i586 0.10.13-7.fc11 rpmfusion free-updates 163 k
gstreamer-plugins-bad-extras i586 0.10.13-7.fc11 rpmfusion-free-updates 69 k .....
Transaction Summary
Install 1 Package(s)
Upgrade 0 Package(s)
Total download size: 167 k
Is this ok [y/N]: y
It seems I can play at least an mpeg movie, and mp3. But I find the quality of sound of the mp3 in kaffeine very poor. Yes, it plays, but some mp3's are struggling the first 10 seconds or so,, eg, Shivers - Armin van Buuren. When I play the same mp3 in xmms, it plays like a charm. That's not what I want, I want an all-round multimedia player. Xine does the job very well,, like xmms,, and plays also the mpeg, but unfortunately, xine shows an error message about a segmentation fault, upon exiting xine. Any hint to play mp3 files in kaffeine like xmms does?
View 2 Replies
View Related
Oct 11, 2010
Upgraded from 10.04 to 10.10 using standard Update Manager procedure. Now I get a sound (thump) in my speakers for almost every button click. The sound theme in System / Preferences / Sound is "No sounds". I would like to completely disable any "activity" sounds from the OS, but nothing works.
View 2 Replies
View Related
Jan 14, 2011
if so I shall have to abandon it again. I have a Motherboard Gigabyte GA-MA74GM-S2, which has an integral sound card. I can't put another sound card in as I have no spare slots.
View 3 Replies
View Related
Dec 9, 2010
I've followed the steps outlined in the Fedora FAQ regarding sound issues. I am attempting to play some MP3 files using RhythmBox, and there's no sound. I have dug a bit deeper. I've tried alsamixer, and when I press F6 (Select Sound Card), I see three entries:
- (default)
0 HDA Intel
1 HDA NVidia
I have tried selecting a different sound card. When I select 1, I see this text: "This sound device does not have any controls". I have an NVidia GeForce 480 video card, but it has been suggested to me that I don't want to use it for sound. My speakers are in my monitor. I would assume that has ramifications on how I set things up for sound within Fedora. I have used some kind of sound test utility by executing this at the command prompt:
"speaker-test -c 2 -t wav".
I hear nothing. I don't know what to do next. If anyone can IM with me using Pidgin, that would be perfect
View 3 Replies
View Related
Dec 1, 2009
I've installed F12 kde fine, but couldn't get any sound. How to troubleshoot this?
View 3 Replies
View Related
Apr 18, 2010
Until recently I was running Fedora 8, for which I also struggled to get the sound working. IIRC the key step in F8 was to select ALSA instead of OSS drivers, or vice versa (I forget which), but that option doesn't seem to exist any more.Since installing F12 I get no sound at all (works fine in Windows). I see a number of threads on this topic in various forums, the most informative I've found being URL... I've checked all the settings mentioned in that thread, but nothing seems to be wrong. Here are a few details of my set-up:
If I run RhythmBox everything seems to work. RhythmBox itself behaves as if it plays and the volume meter shows sensible varying levels of sound. But my speakers don't make any sound at all. All other apps I've tried behave similarly.
View 12 Replies
View Related
Nov 28, 2010
I found several occurences of this problem, but all the fixes were in ubuntu.. Anyway, Ive been trying to get ePSXe to work, and I finaly got it runnin, but found out that I had no sound when I load an ISO. So I looked into OSS. I downloaded the latest rpm that I could find and installed it. From what I read I get the feeling that that isnt how I should have done it. Anyway, once I installed it, I had sound for ePSXe, and flash, but nothing else. Im not exactly sure what happened. Im running FC13 btw.
View 4 Replies
View Related
Feb 14, 2009
Fedora having just installed F10 with the gnome desktop.
I am unable to get any sound, I have an M-Audio Audiophile 2496 soundcard. This worked "out of the box" on my previous linux system - PCLOS Gnome but in Fedora I have no sound at all.
what I need to do or should this have worked with the default install?
View 2 Replies
View Related
Nov 19, 2009
I upgraded to fedora 12 from fedora 11 with the preupgrade tool and all went very well at first try. But now I can't seem to get any sound from anything! I'm using KDE (for the past few years ) and my system in running on an ASUS Z91F.
View 2 Replies
View Related
Mar 19, 2011
I have just installed Fedora 14. x86-64 edition. It is my first experience of using Fedora.
Alas, I am having problems getting sound working for the normal user. I enabled root access to see if it was a permissions thing. Clearly it is. Sounds work for the root account. I have been reading a lot of posts to see what I can change. Nothing has worked yet. I have put myself in the audio group in /etc/group, but it does not help. For some reason pulseaudio will only work for root. I am being denied access to /dev/snd/* even though I am in the audio group and the permissions of the files in /dev/snd allow read/write access to the audiio group. lspci -v | grep audio 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
View 11 Replies
View Related
Jan 4, 2010
I have a clean installation of Fedora 10 + GNOME on a desktop with a Crystal sound card. The card seems correctly detected according to lsmod:
Code: $ lsmod | grep snd
snd_cs4236 18188 0
snd_opl3_lib 12800 1 snd_cs4236
[code]....
View 2 Replies
View Related
Feb 6, 2009
I have an HP Pavilion zv6130us and I believe that there's something wrong with the sound driver, because I only hear system beeps..
View 4 Replies
View Related
Mar 13, 2009
Anybody know the secret to get Rosegarden providing sound.
I got Jack and Hydrogen working but not Rosegarden.
Jack is working does Rosegarden really work?
View 2 Replies
View Related
