Fedora Networking :: Unable To Get Static Network Functioning F14
Feb 18, 2011
I need static networking to be functional on F14 to try freeipa....the problem I have is I am unable to get eth0 to start. Knowing the software it has to be eth0 or it will likely not work... The guest is in a RHEV6svr environment... So I have disabled NetworkManager and enabled networ and set manula settings in ifcfg-eth0 incl the hware address but eth0 wont start on boot....
next I tried setting a e1000 network card after the hypervisor default didnt work, only to find that this doesnt work either. The MAC addresses are changing as I try and fault find a dead DNS client issue (yet another F14 issue but lets not go there yet, it could be RHEV's "funky" NATing setup)....so I suspect F14 has got its knickers in a twist over the MAC for ETH0....I keep changing it and I suspect it cant keep up.....so I need to disable the automatic function(s), if there is one....
So somewhere down in the code there is probably a line saying eth0= <mac address> but despite greping I cant find that.....or not something that I edit and it then works.... I have tried the gui tools and command line tools and I still have no network..... So what would be a totally CLI process to fix this automated crap? ie stop F14 pointing at the wrong MAC for eth0?
[code]....
View 4 Replies
ADVERTISEMENT
Jun 22, 2010
I had been running Fedora 12 for some time without much difficulty until I had to change the motherboard of the computer. The new MB comes with Realtek 8112L PCIe Gigabit LAN controller.I am not able to use this LAN controller without Network Manager. The problem is I am not able to set a static local IP with it. Network Manager -> Edit Connections -> Auto eth2 -> edit -> IPV settingsAs soon as I change Method to Manual, 'Apply' button gets grayed out.I am not able to save any change.
View 5 Replies
View Related
May 1, 2010
I want to force my IP address to 192.169.0.99but my router always allocates me 192.168.0.2I have attached a screen showing my settings.I'm using the broadcom wireless card to connect to the router?Any thoughts, I have tried to change the setting with and without the network manager.
View 3 Replies
View Related
Dec 10, 2010
I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies
View Related
Apr 29, 2011
Our F14 server is looses access to the network once we set a static IP.The same IP, if used on any other pc works fine.We had the same exact setup in our F10 server also.
View 9 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Sep 20, 2010
I've gotten the Ubuntu Broadcom STA driver working on my AppleTV by (not blacklisting) adding the appropriate rmmod statements to my rc.local script. The system now recognizes the card; lswh -C network:
[Code]....
I can now successfully join wifi networks on the device. My ultimate goal is to create a wifi AP using the card via Ubuntu. The card is a bcm4328. I have attempted to create a wifi hotspot using the "Create new network" menu item from the network menu applet. When I try to join the network on my MacBook, it apparently can join successfully, but then gets a "Self Assigned IP" which is outside the LAN's subnet (which is 192.168.200.X, while the IP on the MBP is 169.254.161.193 and the network control panel indicates that it is self-assigned).
It would appear that the AP on the AppleTV is not bridged with the wifi. I have attempted to follow the CLI-based tutorials but chickened out when I saw I had to set the card to master mode as I do not believe the bcm4328 is capable of this.
View 3 Replies
View Related
Jan 12, 2009
In 8.04 I can use the network manager app to set a static IP.
In 8.1 the network manager doesn't seem to work. I tried many different permutations of settings and got nowhere. Even though I put in IP subnet and gateway it still does the DHCP config.
So I added lines to my /etc/networking/interfaces file like this:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
I then either reboot or do this: sudo /etc/init.d/networking restart
This made the network manager icon in the top panel vanish. An ifconfig showed that those settings are in place but DNS doesn't seem to be working. I can ping other hosts on my network by IP but not www.yahoo.com etc.
I even read the man, that's how desperate I got! (a config like the above seems to work on my 8.04 machine except that the auto eth0 appears at the end of the file.)
I didn't see how to set the DNS server(s), unless I was in the wrong man.
View 7 Replies
View Related
Aug 27, 2010
I am trying to secure my LAN a little by doing static arp entries. But I am not sure how to go about doing this... I have a gateway, and I have a seperate box that runs dhcpd. I would like to assign every machine an ip and only allow it to use that ip, therefore static dhcp entries, and static arp entries on the gateway.
1. But how do I prevent someone from picking an ip that nobody is using and assigning it manually?
2. I assigned a static arp entry by doing arp -i br0 -s 2.2.2.35 00:1F:E1:CC:2E:46, how do I remove it now? I used arp -d but now it just says:
? (2.2.2.84) at <incomplete> on br0
3. I would also like each machine to have a hostname/dns.. like machinex.local, where I can do forward and reverse dns lookups, how do I config this?
4. I know static arp can be fooled if someone just clones an allow mac.. is there anything else that I could use that is more secure for wired lan?
5. I have my gateway running rflow sending all data to ntop running on my dhcp box.. Ntop is kinda cryptic, is there anything easier to use? or something that is better in features? I would like to see how much bandwidth each local ip is using and possibly what protocols, like ntop already shows.
View 1 Replies
View Related
Aug 16, 2010
I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0
View 3 Replies
View Related
Apr 15, 2011
I'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.
I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?
At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:
Code:
Do I need the 'network' settings as shown in every tutorial (but never explained)?
View 1 Replies
View Related
May 19, 2009
I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
View 5 Replies
View Related
Oct 27, 2009
I'm having strange difficulties in setting a static ip for my CentOS 5.4 installation. If I use DHCP everything is fine, but with a static ip I have no network connectivity. I have done this many times with RedHat/Fedora/Ubuntu etc. with no problems and now I have no idea what I'm missing or doing wrong. I have tried to set ip as 192.168.1.20 (anything below .100 will do). GW is 192.168.1.1 and NM is 255.255.255.0. This is all I have had to use with other distros, but now when I set these I cannot even access my routers admin page or ping it (192.168.1.1). (I just did this with Vista on my other machine and all worked fine).
View 13 Replies
View Related
Mar 15, 2010
I want my Ubuntu desktop to have a static ip-address, i have altered the interfaces file to the below and also filled the info regarding my wireless network card but still every time I reboot the desktop gets the ip 10.42.43.1, HOW is that possible???
I use a apple time capsule router, I want my desktop to run a apache server thats why I need the static ip. I also want the static ip to be set on the wireless network interface. I have an old laptop with an internal Intel pro 2200 card so there should not be a driver problem.
This i my interfaces config code...
To be on the sure side to get this to work I have configured my router(DHCP) to give my wireless-HWaddress the ip of 10.0.1.15, STILL the ubuntu desktop starts with the false address above.
View 4 Replies
View Related
Jun 3, 2010
I wanted to have a static local IP on my server,But on my 192*.168.1.1, there's a place where ic an see all devices, and before, the displayed name was "STASH" and with the update i put, it'S now "--", but i'd like to keep my old one..
View 2 Replies
View Related
Jul 3, 2011
I want to set up a static IP on my laptop that connects via wireless to my home network. I have 11.04 installed on my laptop. When I try to use the manual IPv4 setting in the network manager the save option gets greyed out. I tried to edit the /etc/network/interfaces file but all the examples I could find on the net refer to eth0. I tried replacing this with wlan0 but this did not work. I tried installing wicd but I kept getting "Bad Password" errors even though I know the password is correct. A number of people recommended uninstalling network manager to get wicd to work but many other posts said that uninstalling network manager didn't help so I didn't want to go ahead and uninstall unnecessarily. Besides I figure if Ubuntu is distributed with network manager there must be a reason for having it. So what do I do to get a static IP address for the client on a wireless connection?
1. I went to network manager and selected "Connection Information" On the information window I saw the following:
IPv4
IP Address: 192.168.1.6 (This is the item I wanted to change and make static)
Broadcast Address: 192.168.1.255
Subnet Mask: 255.255.255.0
[code].....
2. I went to network manager and selected "Edit Connections"
3. I selected the wireless tab and then the wireless network I wanted to edit
4. I clicked on the edit button and then I clicked on the IPv4 settings tab.
5. I changed method from Automatic (DHCP) to Manual
[code]....
View 8 Replies
View Related
Apr 19, 2010
I decided to take the plunge and change the existing static ip configuration for my home network to a dynamic (DHCP) configuration. The DHCP server in this new network config is my gt701-wg actiontec DSL modem.
[Code]....
View 5 Replies
View Related
Jul 13, 2010
I'm using ubuntu server 10.04. I need to create a second network to do some testing. Here's what it looks like so far: WAN > x.x.x.x/9 > router > 192.168.1.0/24 > LAN
I need to do this: WAN > x.x.x.x/9 > router > 192.168.1.0/24 > LAN > ubuntu server (LAMP, dhcp, dns via eth1) [eth0 192.168.1.138] > ubuntu server [eth1 10.0.0.1] The two networks should be transparent to one another. I've got everything working, except routing. Here is ifconfig:
[Code]...
View 5 Replies
View Related
Sep 17, 2010
My /etc/hostname is not announced on the local network (not showing up on my Mac nor router) when setting /etc/network/interfaces to:
Code:
iface eth0 inet static
address10.0.0.10
netmask255.255.255.0
gateway10.0.0.1
I have tried bringing the interface up and down, and have also rebooted. If I change it to DHCP it will display, but this does not really help me.
View 9 Replies
View Related
Jan 27, 2010
I've been using slackware for many years. I think I started with Slack 8. I know how to configure the network, I've had this same POS Dell computer for a few years now but the other day I tried to go to a different distro (first mistake) everything worked fine but it was not for me. Once you go slack you never go back! Anyway I had slack on here prior to the change and it all worked fine. I'm running slack 13 and all of a sudden my network is slow as balls! I set it up as I always have so I did some research and tried a few things, nothing worked. So i enabled DHCP and its fine now.. I have a dell xps 420. onboard intel nic. worked fine when i first installed slack 13. Anyone have any clue what to do? I would like my static IP on this machine.
View 6 Replies
View Related
May 26, 2009
I am having a problem with when I bind a static IP to my NIC I loose all network connectivity but, if i leave it set to dhcp it works fine. I've gone over all my settings a thousand times and they are all correct. Has anyone else had this problem or give me a hint as to what the problem might be?
View 2 Replies
View Related
May 10, 2010
I'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
View 1 Replies
View Related
Jan 27, 2010
I recently installed fedora 12 in my server where I had a page published in my local net by tomcat, and I was looking on the Internet how to set up an static ip address and this is what I did
on /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
#
# File: ifcfg-eth0
[code]....
then I can access via ssh by two addresses the one I got from dhcp (10.17.148.223) and the static one (10.17.148.26) I put ifconfig and and 10.17.148.223 appear on eth0 I restart my server and I just can access from 10.17.148.223 I have to put
ifdown eth0
ifup eth0
Again...to access by my static ip, y can access my page by its dns on my server, but I cant access from other computer...so, I guess when my static adress appears on ifconfig I would be able to access my page from other computer...
View 11 Replies
View Related
May 9, 2009
O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.
View 3 Replies
View Related
Nov 6, 2010
I just installed FEDORA 14 on my PC which already had Vista. I am able to dual boot through the GRUB boot loader. I am facing an issue where wired network in FEDORA stops working if I hibernate Vista. I really would like to be able to hibernate both to quicken the startup times.
Here are the steps:
1. Boot to Fedora (everything works fine including wired network)
2. Hibernate Fedora
3. Boot to Vista (everything works fine including networking)
4. Hibernate Vista
5. Boot to Fedora. It loads up fine, but wired network status icon keeps spinning and then results in a kernel package crash. I already reported the crash to Fedora.
6. Hibernate Fedora and boot to Vista (Vista resumes fine from hibernation and everything works in Vista including networking).
Is Fedora supposed to work when both Fedora and Vista are hibernated in a dual boot PC?If I shut down Vista, and then resume Fedora, networking works fine. So there is something in Vista hibernation that causes Fedora networking to fail. This issue remains even if Fedora is restarted (not hibernate/resume).
View 4 Replies
View Related
Sep 23, 2010
I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail
View 6 Replies
View Related
Feb 16, 2011
I'm having mysterious wired network problem with my Karmic/9.10 machine. It hasn't been in network a while, but now I finally got the cabling done. I can't get the IP from dhcp server (TW-EA510), and static settings doesn't work either. Fresh cabling showed OK 1Gb connection on tester, and win7 laptop works fine. I even tried with long cable though the rooms, but it doesn't help, so it definately isn't the new cabling.
Log from the router after issuing #"dhclient":
Feb 16 23:01:43 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:43 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:01:49 DHCP SERVER: DHCP request from 00:1b:ea:c8:a0:ba
Feb 16 23:01:49 DHCP SERVER: DHCP ack to 00:1b:ea:c8:a0:ba
Feb 16 23:01:54 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
Feb 16 23:01:54 DHCP SERVER: DHCP offer to 00:01:29:fb:c5:d1
Feb 16 23:02:03 DHCP SERVER: DHCPDISCOVER from 00:01:29:fb:c5:d1 via br0
[Code]....
Motherboard is some old Lanparty with two ethernet ports, NVidia CK804 and Marvell 88E800 rev 13 Gigabit netwok adapters, neither of them works. At least another of them has been worked earlier when I last got it wired. It's been a while, so I'm not sure which one of them and with different router if that matters.
View 3 Replies
View Related
Feb 26, 2009
I normally connect to a free wireless project, and did have a Windows box until yesterday when I installed Fedora 10. When I was using Windows, I was able to connect to the unsecured wireless network. Now on Fedora 10, the wireless card is working and is able to pick up signals but the signal strengths are markedly decreased and I am unable to see the network which I usually connected to.I really don't want to go back to Windows.
View 12 Replies
View Related
Jul 7, 2011
I have a problem with my laptop fedora 15 does not detect the wireless network target of Intel Centrino Advanced-N 6230 and Bluetooth 3.0.
View 2 Replies
View Related
Dec 29, 2010
I am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
View 6 Replies
View Related
