Debian :: Working Ndiswrapper Source For Apt-Get
Jan 14, 2009Any working source for ndiswrapper using apt-get. I tried the one in the sticky by craigevil but it no longer works. Or maybe we just download from sourceforge from now on?
View 3 Replies
ADVERTISEMENT
Debian Hardware :: RTL8187 - Ndiswrapper Isn't Working (64-bits Version)
Oct 7, 2010My laptop has a Realtek 8187b usb wireless card. It was working using ndiswrapper and WinXP driver in Debian Sid (32-bits version). I cannot use rtl8187 module because I just can use it beside the access point. With Windows (XP, Seven) I can go to my bedroom and use wireless, with Debian and rtl8187 module I can't. Ndiswrapper solved this problem...
Yesterday I've installed Debian Sid (64-bits version) and ndiswrapper is not working anymore. I've tried a lot of drivers (XP, XP64, Vista, Vista64, Seven, Seven64). XP64 version crashes the computer and I need to reboot to use Debian again. My access point is a D-LINK 2640t.
Networking :: Ndiswrapper - WEP Key Not Working
Jan 6, 2009I am trying to connect to my WEP enabled wireless network. I have a pci wireless card with chipset id 10ec:8190, and installed the driver (net8190p.inf) with ndiswrapper on Ubuntu Linux 8.10. I am able to connect when I disable WEP, so I'm sure that the driver is installed correctly and is working. I am connected now from XP with WEP enabled. How to get my Ubuntu distro connected here?
View 1 Replies View RelatedUbuntu :: Error Inserting Ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper
Dec 18, 2010I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
Ubuntu :: NDISwrapper - How To Get Internet Working
Jan 17, 2010I've got ubuntu (its google os but its the same as ubuntu) and I've tried millions of times to get my internet working. I've tried the ndiswrapper thing but I am not sure how to get and install it.
View 2 Replies View RelatedFedora Networking :: 14 X64 Ndiswrapper Modprobe Ndiswrapper Module Not Found?
Jan 28, 2011i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies View RelatedUbuntu :: Wireless Internet Not Working \ Installed Ndiswrapper?
Feb 15, 2010I just installed ndiswrapper so I could install my wireless PCI card drivers.I did that and it is recognized and so is the network I want to connect to.But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected".What could be the problem? It's not like I have a bad connection or anything
View 2 Replies View RelatedGeneral :: Wireless Not Working - Ndiswrapper And Drivers Installed?
Sep 15, 2010I just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View RelatedFedora Networking :: Get Wifi Working On Hp Pavilion Dm1-3101ea Using Ndiswrapper?
Jul 6, 2011This laptop arrived in the post yesterday and everything on f15 works out of the box except wireless.Digging out an old ethernet cable I was finally able to get wireless working by doing the following: First install ndiswrapper. We'll be using rpmfusion for this so you'll need to
[Code]...
After a reboot it all loaded and worked fine, just remember to make sure the little light on the f12 button is blue, not red. This guide should work for other laptops and other distros as well (though obviously you'll likely need a different driver file to start off with).
Ubuntu Networking :: Bcm4318 And 10.04 Lucid / B43 Module Working Instead Of Ndiswrapper?
Jun 17, 2010I have a broadcom 4318 chipset for my wireless card, but after an upgrade to lucid my system was acting funny. I did a complete reinstall and all the issues are resolved except the wireless card. I would like to get the b43 module working instead of ndiswrapper. How can i do this right in lucid?
View 2 Replies View RelatedUbuntu Networking :: Ndiswrapper Stops Working After Update - Belkin 54g?
Oct 23, 2010I'm trying to get internet set up on my grandad's laptop (sony pcg-f590), which has a fairly old pcmcia belkin 54g wireless card. I've installed the relevant bcmwl5a.inf driver through ndiswrapper, and for a time wireless worked so I installed updates through update manager. however after restarting the network manager menu comes up with "wireless networks disconnected" and no list of networks (I know there are because my laptop works and his is sitting next to the router!). The light is on on the network card so I know the laptop is talking to it. Unplugging and replugging the card does nothing, and neither does restarting again.
View 1 Replies View RelatedUbuntu Networking :: Installed Driver Via Ndiswrapper. Wireless Still Not Working?
Mar 30, 2011Before I start off, I must say that I know NOTHING about Ubuntu. I only know how to run .deb files. So I installed my wireless driver via the graphical ndiswrapper (FYI my wireless adapter is a Proxim 8424-WD). It then said "Unable to see if hardware is present". After I exited out of that message, it said "Hardware:Present" (or something of that sort) next to the newly installed driver. I tried searching for wireless networks and found none. I'm guessing something didn't work right. I used this command "lshw -C network" and got the following result.
[Code]...
Ubuntu Networking :: RealTek 8190 Wireless Ndiswrapper Working But No Connection?
Mar 18, 2011I've been using a RealTek 8190 PCI wireless card on my desktop in Ubuntu 10.04. The net819xp driver worked fine in ndiswrapper. Then my housemates got a new router and switched our wireless SSID & password. In network manager, I can see the SSIDs, but when I try to connect to our SSID, it continues trying to connect but never does connect. Something related to the router change and router firmware upgrade created this problem and i'm sure i need to fix it on my computer. All my windows7 flatmates are connecting with no problem. Right now I'm using my laptop, so i can't copy & paste results from terminal commands,
View 1 Replies View RelatedUbuntu Networking :: Rt2870sta / Rt2800usb / Ndiswrapper Not Working For Sitecom 300N Wireless(WL-324)
Nov 21, 2010how to use the Sitecom WL-324 usb stick with ubuntu (10.10)? (It works with windows.)
lsusb | grep Ralink
Code:
Bus 002 Device 004: ID 148f:2878 Ralink Technology, Corp.Im using Ubuntu 10.10 x64 with a Phenom(tm) II X6 System My results so far:
sudo modprobe rt2870sta (or rt2800usb)
result (rt2870sta) :
lsmod | grep rt28
Code:
rt2870sta 445182 0
crc_ccitt 1699 1 rt2870sta
dmesg
[code]....
Debian Configuration :: Iwconfig Freezing With Ndiswrapper
Jun 1, 2011I have a Dlink DWA-142 usb wireless adapter that I am trying to configure on a Debian 6.0 system. I couldn't find any linux drivers for this card so I used ndiswrapper. The drivers (latest xp version from the website) have installed successfully as far as i know because I can see the card and scan for access points using 'iwlist wlan0 scan'.
I tried to use the card with both Wicd and NetworkManager, which both fail to connect to my WPA encrypted wireless router. So after this I went to the command line to find that if I try to connect to the accesspoint using Iwconfig, that the program hangs... as in my terminal does not write a new line because it is waiting for the above command to complete.
I have done:
And the terminal hangs on the above command, so I imagine this is where wicd and network manager were getting stuck too. ndiswrapper is the latest version, compiling from source and reinstalling it made no difference either.
Debian Configuration :: Put Together The Driver With The Linksys WUSB100 V2 Using Ndiswrapper?
Apr 21, 2010I was able to successfully put together the driver with the Linksys WUSB100 v2 using ndiswrapper.
Here is what i get from ndiswrapper -l: rt2870: driver installed device (1737:0078) present (alternate driver: rt2870sta)But, the catch is where it maps to: ra0 instead of wlan0. This has caused me problems in order to get it to connect through network-manager or in the terminal.
ifconfig output for ra0:
ra0:
Link encap: Ethernet HWaddr 00:1e:e5:e8:14:e6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
Debian Configuration :: Error: Module Ndiswrapper Not Found
May 23, 2010I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
OpenSUSE Wireless :: Command "modprobe Ndiswrapper" Not Working?
Apr 6, 2010I have a problem with the fritz!wlan usb stick. I have installed itth success on another PC by using instructions published here Ndiswrapper - openSUSE.Today I have decided to erase WindowsXP from my wife's computer (that is an identical to the one I use). So I have downloaded the OpenSuse 11.2 DVD and I have performed a completely new installation from DVD.After installation has been executed with success, I have decided to install an internet connection using the istructions above. I told to myself: "it will take 5 minutes, all I must to do is to reply action I have done one month ago... the internet usb-stick is the same, so it will be easy to replicate the process..."I was wrong... When I reach the point where I must "modprobe" the ndiswrapper module I receive what follows:
Code:
linux-2n4g:/home/mila/Desktop # modprobe ndiswrapper
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
Ubuntu :: Apt-get Source Baobab Is Not Working?
Jan 2, 2010I am not sure why this isn't working. I have source code checked off in software repositories, and I see deb-src lines in sources.list. They are not commented. I'd like to recompile the deb and enable "move to trash" from the right click menu.$ apt-get source baobab Reading package lists... DoneBuilding dependency treeReading state information... DoneE: Unable to find a source package for baobab
View 1 Replies View RelatedProgramming :: Source Or Dot Command Not Working In Makefile
Apr 5, 2010I am trying to run a script to setup environment variables and then run other commands in a make file. But the source or the dot operator (shell is bash) does not seem to take any effect as the subsequent command didn't pick the environment up. Do I have to put every lines of the environment setup in the first script into the makefile instead?
sample setenv.sh
#!/bin/sh
export MYDIR=/somedir
sample makefile:
all: source ./setenv.sh
echo $(MYDIR)
Red Hat / Fedora :: Yum Source Distro Packages Not Working?
Jul 8, 2011My SL6.1 Distribution isn't connecting the the source packages from yum. It says something along the lines of the repo???.xml cannot be found for altrpms & sourceforge packages.
I have already tried using the command:
su yum clean all su yum update package-list
but that failed to work.
and su yum makecache
Is there any other way i can try? Like uninstalling the source from yum then reinstalling it?
Debian Configuration :: Dropbox Install For Debian Squeeze From Source Code
Feb 19, 2011how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedDebian Multimedia :: Squeeze Compiling Dwm From Debian Source / Reality Check
Aug 18, 2011Below is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
Ubuntu Security :: Any Kernel Source To Get Sebek 2.6.32 Working?
Nov 12, 2010A while back there was a lkm called sebek, which is designed to work in a honeypot for finding and studying internet hackers, but its very outdated and wont work with newer 2.6 kernels. Anyone know of any projects currently in the works to mod the kernel source to get it it work again? I know it's easily detected but thought that someone might still be working on somewhere.
View 1 Replies View RelatedNetworking :: Autofs No Longer Working - Finding Source ?
May 23, 2011After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive).
The setup was working before and the same exact setup is being used and is fully functional on another computer.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders).
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
Ubuntu :: Autofs Has Suddenly Stopped Working - Finding Source ?
May 23, 2011After several days of searching, reading and re-installing, I'm at a complete loss as to why autofs has suddenly stopped working.
Basically, I can see the shared folders on the host computer but as soon as I try to cd into the folders I get "-bash: cd: [directory]: No such file or directory" (where [directory] = shared drive.
The setup used to work and the exact same setup on another computer computer works flawlessly.
I'm running Ubuntu 11.04
Here is the content of auto.cifs:
Code:
Here is the content of auto.master
Code:
And credentials are stored in /etc/auto.smb.goblin (where goblin = name of windows computer sharing folders.
When I do "ls -l /home/shoryuken/TerraDrive/goblin" I get:
Code:
Now if I try to "cd" into any of the shared drives (like D-Drive, GW_Share or TerraDrive) I get the following:
Code:
A second or subsequent attempt at "ls -l" results in:
Code:
Note the question marks that are now everywhere.
I'm not sure where to look to find out why this is failing. The shared drive are visible, but then disappear when I try to access them. The same exact setup, on another machine works perfectly fine.
General :: Grub2 Source Code Download Link Not Working
Mar 16, 2010I am very curious about updated graphics in GRUB2. So I want to compile and load grub2. Where can I get the grub2 source code. While browsing I got two links [/COLOR]
[URL] [URL]
First one has upto 1.98. Second link is not working. Can someone point the link where GRUB2 is available.
Software :: Source Installation Not Working Correctly In Mandriva 2010.0 Pp?
Jun 5, 2010So I just installed Mandriva and was trying to install alien so I don't have to deal with source anymore. This happened, tried other sources and the same error. Maybe I'm overlooking something simple, but this is killing me.
so, First I wget (url for alien). It finishes.
Then, I start the installation
Code:
me@localhost ~]$ tar xvzf alien_8.1.1.tar.gz
me@localhost ~]$ cd alien
that takes me to where it should. then
[Code]....
Am I doing something wrong with this? Why is the ./configure not recognized?
Software :: Ubantu9.04 Display While Working With Open-source Framework Adempiere
Jan 19, 2010There is problem with Adempiere(opensource framework based on Java Platform) framework on ubantu9.04,as the last character get blurred in every text field.Sometimes total word became unclear.I have tested this framework with other flavor of linux,it works fine. As this is not error there is no log and I am unable to find the entry point,to search about this problem.I tried changing the the themes,changing the java version,but it wont worked.
View 1 Replies View RelatedDebian :: How To Compile From Source
Jun 1, 2015I can't compile using the instructions on the package... the package in question is this: [URL] ....
Just trying to play with old and good windowmaker. When running make it just says "make: nothing to be done for 'all'.